lib
Fork of mbed-dev by
Diff: targets/TARGET_STM/TARGET_STM32F0/can_api.c
- Revision:
- 149:156823d33999
- Parent:
- 138:881eab8cab64
diff -r 21d94c44109e -r 156823d33999 targets/TARGET_STM/TARGET_STM32F0/can_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_STM/TARGET_STM32F0/can_api.c Fri Oct 28 11:17:30 2016 +0100 @@ -0,0 +1,461 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2016 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "can_api.h" + +#if DEVICE_CAN + +#include "cmsis.h" +#include "pinmap.h" +#include "PeripheralPins.h" +#include "mbed_error.h" +#include <math.h> +#include <string.h> + +#define CAN_NUM 1 +static CAN_HandleTypeDef CanHandle; +static uint32_t can_irq_ids[CAN_NUM] = {0}; +static can_irq_handler irq_handler; + +void can_init(can_t *obj, PinName rd, PinName td) +{ + CANName can_rd = (CANName)pinmap_peripheral(rd, PinMap_CAN_RD); + CANName can_td = (CANName)pinmap_peripheral(td, PinMap_CAN_TD); + obj->can = (CANName)pinmap_merge(can_rd, can_td); + MBED_ASSERT((int)obj->can != NC); + + if(obj->can == CAN_1) { + __HAL_RCC_CAN1_CLK_ENABLE(); + obj->index = 0; + } + + // Configure the CAN pins + pinmap_pinout(rd, PinMap_CAN_RD); + pinmap_pinout(td, PinMap_CAN_TD); + if (rd != NC) { + pin_mode(rd, PullUp); + } + if (td != NC) { + pin_mode(td, PullUp); + } + + CanHandle.Instance = (CAN_TypeDef *)(obj->can); + + CanHandle.Init.TTCM = DISABLE; + CanHandle.Init.ABOM = DISABLE; + CanHandle.Init.AWUM = DISABLE; + CanHandle.Init.NART = DISABLE; + CanHandle.Init.RFLM = DISABLE; + CanHandle.Init.TXFP = DISABLE; + CanHandle.Init.Mode = CAN_MODE_NORMAL; + CanHandle.Init.SJW = CAN_SJW_1TQ; + CanHandle.Init.BS1 = CAN_BS1_6TQ; + CanHandle.Init.BS2 = CAN_BS2_8TQ; + CanHandle.Init.Prescaler = 2; + + if (HAL_CAN_Init(&CanHandle) != HAL_OK) { + error("Cannot initialize CAN"); + } + // Set initial CAN frequency to 100kb/s + can_frequency(obj, 100000); + + can_filter(obj, 0, 0, CANStandard, 0); +} + +void can_irq_init(can_t *obj, can_irq_handler handler, uint32_t id) +{ + irq_handler = handler; + can_irq_ids[obj->index] = id; +} + +void can_irq_free(can_t *obj) +{ + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + + can->IER &= ~(CAN_IT_FMP0 | CAN_IT_FMP1 | CAN_IT_TME | \ + CAN_IT_ERR | CAN_IT_EPV | CAN_IT_BOF); + can_irq_ids[obj->can] = 0; +} + +void can_free(can_t *obj) +{ + // Reset CAN and disable clock + if (obj->can == CAN_1) { + __HAL_RCC_CAN1_FORCE_RESET(); + __HAL_RCC_CAN1_RELEASE_RESET(); + __HAL_RCC_CAN1_CLK_DISABLE(); + } +} + +// The following table is used to program bit_timing. It is an adjustment of the sample +// point by synchronizing on the start-bit edge and resynchronizing on the following edges. +// This table has the sampling points as close to 75% as possible (most commonly used). +// The first value is TSEG1, the second TSEG2. +static const int timing_pts[23][2] = { + {0x0, 0x0}, // 2, 50% + {0x1, 0x0}, // 3, 67% + {0x2, 0x0}, // 4, 75% + {0x3, 0x0}, // 5, 80% + {0x3, 0x1}, // 6, 67% + {0x4, 0x1}, // 7, 71% + {0x5, 0x1}, // 8, 75% + {0x6, 0x1}, // 9, 78% + {0x6, 0x2}, // 10, 70% + {0x7, 0x2}, // 11, 73% + {0x8, 0x2}, // 12, 75% + {0x9, 0x2}, // 13, 77% + {0x9, 0x3}, // 14, 71% + {0xA, 0x3}, // 15, 73% + {0xB, 0x3}, // 16, 75% + {0xC, 0x3}, // 17, 76% + {0xD, 0x3}, // 18, 78% + {0xD, 0x4}, // 19, 74% + {0xE, 0x4}, // 20, 75% + {0xF, 0x4}, // 21, 76% + {0xF, 0x5}, // 22, 73% + {0xF, 0x6}, // 23, 70% + {0xF, 0x7}, // 24, 67% +}; + +static unsigned int can_speed(unsigned int pclk, unsigned int cclk, unsigned char psjw) +{ + uint32_t btr; + uint16_t brp = 0; + uint32_t calcbit; + uint32_t bitwidth; + int hit = 0; + int bits; + + bitwidth = (pclk / cclk); + + brp = bitwidth / 0x18; + while ((!hit) && (brp < bitwidth / 4)) { + brp++; + for (bits = 22; bits > 0; bits--) { + calcbit = (bits + 3) * (brp + 1); + if (calcbit == bitwidth) { + hit = 1; + break; + } + } + } + + if (hit) { + btr = ((timing_pts[bits][1] << 20) & 0x00700000) + | ((timing_pts[bits][0] << 16) & 0x000F0000) + | ((psjw << 24) & 0x0000C000) + | ((brp << 0) & 0x000003FF); + } else { + btr = 0xFFFFFFFF; + } + + return btr; + +} + +int can_frequency(can_t *obj, int f) +{ + int pclk = HAL_RCC_GetPCLK1Freq(); + int btr = can_speed(pclk, (unsigned int)f, 1); + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + + if (btr > 0) { + can->MCR |= CAN_MCR_INRQ ; + while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) { + } + can->BTR = btr; + can->MCR &= ~(uint32_t)CAN_MCR_INRQ; + while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) { + } + return 1; + } else { + return 0; + } +} + +int can_write(can_t *obj, CAN_Message msg, int cc) +{ + uint32_t transmitmailbox = 5; + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + + /* Select one empty transmit mailbox */ + if ((can->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) { + transmitmailbox = 0; + } else if ((can->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) { + transmitmailbox = 1; + } else if ((can->TSR&CAN_TSR_TME2) == CAN_TSR_TME2) { + transmitmailbox = 2; + } else { + transmitmailbox = CAN_TXSTATUS_NOMAILBOX; + } + + if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX) { + can->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ; + if (!(msg.format)) + { + can->sTxMailBox[transmitmailbox].TIR |= ((msg.id << 21) | msg.type); + } + else + { + can->sTxMailBox[transmitmailbox].TIR |= ((msg.id << 3) | CAN_ID_EXT | msg.type); + } + + /* Set up the DLC */ + can->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0; + can->sTxMailBox[transmitmailbox].TDTR |= (msg.len & (uint8_t)0x0000000F); + + /* Set up the data field */ + can->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)msg.data[3] << 24) | + ((uint32_t)msg.data[2] << 16) | + ((uint32_t)msg.data[1] << 8) | + ((uint32_t)msg.data[0])); + can->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)msg.data[7] << 24) | + ((uint32_t)msg.data[6] << 16) | + ((uint32_t)msg.data[5] << 8) | + ((uint32_t)msg.data[4])); + /* Request transmission */ + can->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ; + } + + return 1; +} + +int can_read(can_t *obj, CAN_Message *msg, int handle) +{ + //handle is the FIFO number + + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + + /* Get the Id */ + msg->format = (CANFormat)((uint8_t)0x04 & can->sFIFOMailBox[handle].RIR); + if (!msg->format) { + msg->id = (uint32_t)0x000007FF & (can->sFIFOMailBox[handle].RIR >> 21); + } else { + msg->id = (uint32_t)0x1FFFFFFF & (can->sFIFOMailBox[handle].RIR >> 3); + } + + msg->type = (CANType)((uint8_t)0x02 & can->sFIFOMailBox[handle].RIR); + /* Get the DLC */ + msg->len = (uint8_t)0x0F & can->sFIFOMailBox[handle].RDTR; +// /* Get the FMI */ +// msg->FMI = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDTR >> 8); + /* Get the data field */ + msg->data[0] = (uint8_t)0xFF & can->sFIFOMailBox[handle].RDLR; + msg->data[1] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 8); + msg->data[2] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 16); + msg->data[3] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDLR >> 24); + msg->data[4] = (uint8_t)0xFF & can->sFIFOMailBox[handle].RDHR; + msg->data[5] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 8); + msg->data[6] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 16); + msg->data[7] = (uint8_t)0xFF & (can->sFIFOMailBox[handle].RDHR >> 24); + + /* Release the FIFO */ + if(handle == CAN_FIFO0) { + /* Release FIFO0 */ + can->RF0R = CAN_RF0R_RFOM0; + } else { /* FIFONumber == CAN_FIFO1 */ + /* Release FIFO1 */ + can->RF1R = CAN_RF1R_RFOM1; + } + + return 1; +} + +void can_reset(can_t *obj) +{ + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + + can->MCR |= CAN_MCR_RESET; + can->ESR = 0x0; +} + +unsigned char can_rderror(can_t *obj) +{ + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + return (can->ESR >> 24) & 0xFF; +} + +unsigned char can_tderror(can_t *obj) +{ + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + return (can->ESR >> 16) & 0xFF; +} + +void can_monitor(can_t *obj, int silent) +{ + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + + can->MCR |= CAN_MCR_INRQ ; + while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) { + } + if (silent) { + can->BTR |= ((uint32_t)1 << 31); + } else { + can->BTR &= ~((uint32_t)1 << 31); + } + can->MCR &= ~(uint32_t)CAN_MCR_INRQ; + while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) { + } +} + +int can_mode(can_t *obj, CanMode mode) +{ + int success = 0; + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + can->MCR |= CAN_MCR_INRQ ; + while((can->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) { + } + switch (mode) { + case MODE_NORMAL: + can->BTR &= ~(CAN_BTR_SILM | CAN_BTR_LBKM); + success = 1; + break; + case MODE_SILENT: + can->BTR |= CAN_BTR_SILM; + can->BTR &= ~CAN_BTR_LBKM; + success = 1; + break; + case MODE_TEST_GLOBAL: + case MODE_TEST_LOCAL: + can->BTR |= CAN_BTR_LBKM; + can->BTR &= ~CAN_BTR_SILM; + success = 1; + break; + case MODE_TEST_SILENT: + can->BTR |= (CAN_BTR_SILM | CAN_BTR_LBKM); + success = 1; + break; + default: + success = 0; + break; + } + can->MCR &= ~(uint32_t)CAN_MCR_INRQ; + while((can->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) { + } + return success; +} + +int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle) +{ + CanHandle.Instance = (CAN_TypeDef *)(obj->can); + CAN_FilterConfTypeDef sFilterConfig; + + sFilterConfig.FilterNumber = handle; + sFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK; + sFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT; + sFilterConfig.FilterIdHigh = (uint8_t) (id >> 8); + sFilterConfig.FilterIdLow = (uint8_t) id; + sFilterConfig.FilterMaskIdHigh = (uint8_t) (mask >> 8); + sFilterConfig.FilterMaskIdLow = (uint8_t) mask; + sFilterConfig.FilterFIFOAssignment = 0; + sFilterConfig.FilterActivation = ENABLE; + sFilterConfig.BankNumber = 14; + + HAL_CAN_ConfigFilter(&CanHandle, &sFilterConfig); + + return 0; +} + +static void can_irq(CANName name, int id) +{ + uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0; + CanHandle.Instance = (CAN_TypeDef *)name; + + if(__HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_TME)) { + tmp1 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_0); + tmp2 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_1); + tmp3 = __HAL_CAN_TRANSMIT_STATUS(&CanHandle, CAN_TXMAILBOX_2); + if(tmp1 || tmp2 || tmp3) + { + irq_handler(can_irq_ids[id], IRQ_TX); + } + } + + tmp1 = __HAL_CAN_MSG_PENDING(&CanHandle, CAN_FIFO0); + tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_FMP0); + + if((tmp1 != 0) && tmp2) { + irq_handler(can_irq_ids[id], IRQ_RX); + } + + tmp1 = __HAL_CAN_GET_FLAG(&CanHandle, CAN_FLAG_EPV); + tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_EPV); + tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR); + + if(tmp1 && tmp2 && tmp3) { + irq_handler(can_irq_ids[id], IRQ_PASSIVE); + } + + tmp1 = __HAL_CAN_GET_FLAG(&CanHandle, CAN_FLAG_BOF); + tmp2 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_BOF); + tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR); + if(tmp1 && tmp2 && tmp3) { + irq_handler(can_irq_ids[id], IRQ_BUS); + } + + tmp3 = __HAL_CAN_GET_IT_SOURCE(&CanHandle, CAN_IT_ERR); + if(tmp1 && tmp2 && tmp3) { + irq_handler(can_irq_ids[id], IRQ_ERROR); + } +} + +void CAN_IRQHandler(void) +{ + can_irq(CAN_1, 0); +} + +void can_irq_set(can_t *obj, CanIrqType type, uint32_t enable) +{ + + CAN_TypeDef *can = (CAN_TypeDef *)(obj->can); + IRQn_Type irq_n = (IRQn_Type)0; + uint32_t vector = 0; + uint32_t ier; + + if(obj->can == CAN_1) { + switch (type) { + case IRQ_RX: + ier = CAN_IT_FMP0; + break; + case IRQ_TX: + ier = CAN_IT_TME; + break; + case IRQ_ERROR: + ier = CAN_IT_ERR; + break; + case IRQ_PASSIVE: + ier = CAN_IT_EPV; + break; + case IRQ_BUS: + ier = CAN_IT_BOF; + break; + default: return; + } + irq_n = CEC_CAN_IRQn; + vector = (uint32_t)&CAN_IRQHandler; + } + + if(enable) { + can->IER |= ier; + } else { + can->IER &= ~ier; + } + + NVIC_SetVector(irq_n, vector); + NVIC_EnableIRQ(irq_n); +} + +#endif // DEVICE_CAN +