File content as of revision 3:64a5b67d5b51:

/** \file ssd.h
 *  \brief mbed TFT LCD controller for displays with the SSD1289 IC.
 *  \copyright GNU Public License, v2. or later
 *
 * A known display with this type of controller chip is the ITDB02-3.2S
 * from http://imall.iteadstudio.com
 *
 * This library is based on the Arduino/chipKIT UTFT library by Henning
 * Karlsen, http://henningkarlsen.com/electronics/library.php?id=52
 *
 * Copyright (C)2010-2012 Henning Karlsen. All right reserved.
 * Copyright (C)2012 Todor Todorov.
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to:
 *
 * Free Software Foundation, Inc.
 * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
 *
 *********************************************************************/
#ifndef TFTLCD_SSD1289_H
#define TFTLCD_SSD1289_H

#include "lcd_base.h"

/** Represents a LCD instance.
 *
 * This is the utility class, through which the display can be manipulated
 * and graphics objects can be shown to the user.  A known display, which
 * works with this library is the ITDB02-3.2S from iTeadStudio - a RGB TFT
 * with 240x320 pixels resolution and 65K colors, using 16-bit interface.
 *
 * The display needs 20 or 21 pins to work with mbed, so it is possibly not
 * the best of choices out there, but other than that it uses +3.3V for
 * power and logic, as well as the backlight, thus can be interfaced directly
 * to the mbed without the need of shields or level shifters as with Arduino.
 *
 * How to use:
 * \code
 * // include the library, this will also pull in the header for the provided fonts
 * #include "ssd1289.h"
 * 
 * // prepare the data bus for writing commands and pixel data
 * BusOut dataBus( p30, p29, p28, p27, p26, p25, p24, p23, p22, p21, p20, p19, p18, p17, p16, p15 ); // 16 pins
 * // create the lcd instance
 * SSD1289 lcd( p14, p13, p12, p11, &dataBus ); // control pins and data bus
 *
 * int main()
 * {
 *     // initialize display - place it in standard portrait mode and set background to black and
 *     //                      foreground to white color.
 *     lcd.Initialize();
 *     // set current font to the smallest 8x12 pixels font.
 *     lcd.SetFont( Font8x12 );
 *     // print something on the screen
 *     lcd.Print( "Hello, World!", CENTER, 25 ); // align text to center horizontally and use starndard colors
 *
 *     while ( 1 ) { }
 * }
 *
 * \endcode
 * \version 0.1
 * \author Todor Todorov
 */
class SSD1289LCD : public LCD
{
public:
    /** Creates a new instance of the class.
     *
     * \param CS Pin for the ChipSelect signal.
     * \param RESET Pin for the RESET line.
     * \param RS Pin for the RS signal.
     * \param WR Pin for the WR signal.
     * \param DATA_PORT Address of the data bus for transfer of commands and pixel data.
     * \param RD Pin for the RD signal. This line is not needed by the driver, so if you would like to
     *       use the pin on the mbed for something else, just pull-up the respective pin on the LCD high,
     *       and do not assign a value to this parameter when creating the controller instance.
     */
    SSD1289LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName RD = NC );
    
    /** Initialize display.
     *
     * Wakes up the display from sleep, initializes power parameters.
     * This function must be called first, befor any painting on the
     * display is done, otherwise the positioning of graphical elements
     * will not work properly and any paynt operation will not be visible
     * or produce garbage.
     *
     * \param oritentation The display orientation, landscape is default.
     */
    virtual void Initialize( orientation_t orientation = LANDSCAPE );
    
protected:
    virtual void WriteCmd( unsigned short cmd );
    virtual void WriteData( unsigned short data );
    virtual void SetXY( uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2 );
    
private:
    DigitalOut _lcd_pin_reset, _lcd_pin_wr;
    BusOut* _lcd_port;
    DigitalOut* _lcd_pin_rd;
};

#endif /* TFTLCD_SSD1289_H */