![](/media/cache/group/default_image.jpg.50x50_q85.jpg)
attempt 1
Dependencies: mbed
main.cpp
- Committer:
- jaredwil
- Date:
- 2015-03-27
- Revision:
- 4:857d2663c894
- Parent:
- 3:f45ab902c0ad
- Child:
- 5:d5f2ff7ca039
File content as of revision 4:857d2663c894:
#include "mbed.h" #include <map> //elevator I/O BusOut leds(LED1,LED2,LED3,LED4); PwmOut EN(p22); DigitalOut IN1(p30); DigitalOut IN2(p29); //p23 LEFT p24 RIGHT PwmOut leftDoor(p21); //PwmOut rightDoor(p22); InterruptIn irIN(p16); Serial pc(USBTX, USBRX); //itizilize digital I/O for keypad DigitalOut row1(p27); DigitalOut row2(p28); DigitalIn col1(p20); DigitalIn col2(p19); DigitalIn col3(p18); //timer for row switch Timer t1; Timer irT; //init keypad map map<int, int> keypadMap; int curFloor; //initialize at 2 int floorDesired = 1; //init floor buffer bool floors[5] = {false, false, false,false,false}; int open = 0; int count = 0; int nextFloor = 1; //direction 1:up; 2: down; int direction = 0; float first = 10000.0; float second = 5000.0; float third = 3333.0; float fourth = 2500.0; float fifth = 2000.0; float tol = 150.0; void init(){ /* keypadMap[0x11]= 0x1; keypadMap[0x12]= 0x2; keypadMap[0x14]= 0x4; keypadMap[0x18]= 0x0; keypadMap[0x21]= 0x8; keypadMap[0x22]= 0x0; keypadMap[0x24]= 0x0; keypadMap[0x28]= 0x0; */ keypadMap[0x11]= 1; keypadMap[0x12]= 2; keypadMap[0x14]= 3; keypadMap[0x21]= 4; keypadMap[0x24]= 5; //keypadMap[0x24]= 0; } void openDoors(){ leftDoor= 0.075; //init door closed //rightDoor= 0.125; //itit door closed] } void closeDoors(){ leftDoor= 0.125; //init door closed //rightDoor= 0.075; //itit door closed } void up(){ EN = 0.6; IN1 = 1; IN2 = 0.0; } void down(){ EN = 0.6; IN1 = 0.0; IN2 = 1; } void stop(){ EN = 0.0; IN1 = 0.0; IN2 = 0.0; } int getFloor(float period) { if (first - tol < period && first + tol >= period) return 1; else if (second - tol < period && second + tol >= period) return 2; else if (third - tol < period && third + tol >= period) return 3; else if (fourth - tol < period && fourth + tol >= period) return 4; else if (fifth - tol < period && fifth + tol >= period) return 5; else return 0; } void irRise() { irT.start(); } int aggr; int temp; int prev; void irFall() { irT.stop(); float irPeriod = 2 * irT.read_us(); temp = getFloor(irPeriod); if(temp != 0){ if(temp == prev) aggr++; else aggr = 0; if(aggr == 15){ curFloor = temp; aggr = 0; } prev = temp; } irT.reset(); } int getNextFloor() { //up if (direction == 1){ for (int i = curFloor; i< 5; ++i){ if(floors[i]==true) return i+1; } for (int i = curFloor - 2; i >=0 ; --i){ if(floors[i]==true) return i+1; } return curFloor; } //down else if (direction == 2){ for (int i = curFloor - 2; i >=0 ; --i){ if(floors[i]==true) return i+1; } for (int i = curFloor; i< 5; ++i){ if(floors[i]==true) return i+1; } return curFloor; } else return floorDesired; //else return; } int main() { init(); //Initialize rows to 0 and keypad stuff row1 = 0; row2 = 0; t1.start(); int cur_input = 0x00; int prev_input = 0x00; //float irPeriod = 0; irIN.rise(&irRise); irIN.fall(&irFall); //initialize servo and dc motor float freq = 50; //set 50 HZ freq for PWM and motor EN.period(1/freq); leftDoor.period(1/freq); leftDoor= 0.125; //init door closed //rightDoor.period(1/freq); //rightDoor= 0.075; //itit door closed int reach = 0; //go down until 1st floor detected as starting point pc.printf("Starting elevator \r"); while(curFloor != 1) { down(); } stop(); while(1) { /////////////Below contains all code in order to detect current input from keypad//////////////////////////// if(prev_input == 0){ row1 = 0; row2 = 0; //Keep each pin on for 4ms //"turn on" appropriat bit in map when on. switch(t1.read_ms()%8){ case 0: row1 = 1; cur_input |= 0x10; break; case 4: row2 = 1; cur_input |= 0x20; break; } } //Check each colum to see if it is high //if it is "turn on" that respective bit if(col1 == 1) cur_input |= 0x01; else if(col2 == 1) cur_input |= 0x02; else if(col3 == 1) cur_input |= 0x04; else cur_input = 0; //Detect button release or no input set input to 0 if(cur_input == 0x22) leds = 0x1; //leds = keypadMap[cur_input]; //KEYPAD DEBUG if(cur_input != prev_input && cur_input != 0){ floorDesired = keypadMap[cur_input]; floors[floorDesired - 1] = true; nextFloor = getNextFloor(); pc.printf("Current Floor = %d, Next Floor = %d, Direction = %d, Last floor input = %d\r",curFloor,nextFloor, direction, floorDesired); } //Maintain the past input prev_input = cur_input; //fix this error i don't know why it exsits ////////////////////////MOVE FLOORS////////////////////////////////////////////////// if(curFloor == nextFloor){ //if correct stop moving and get the next floor stop(); if(open == 0) { openDoors(); open = 1; } floors[nextFloor-1] = false; if(reach == 0 ){ nextFloor = getNextFloor(); wait(1); //pc.printf("Current Floor = %d, Next Floor = %d\r",curFloor,nextFloor); reach = 1; pc.printf("Current Floor = %d, Next Floor = %d, Direction = %d, Last floor input = %d\r",curFloor,nextFloor, direction, floorDesired); } reach = 1; } if(curFloor < nextFloor){ //if the cur floor is below the nextfloor move up reach = 0; closeDoors(); up(); direction = 1; } if(curFloor > nextFloor){ //if the cur floor is above the nextfloor move down if(open == 1) { closeDoors(); open = 0; } reach = 0; down(); direction = 2; } } }