Revision 8:8962bcb7ddc4, committed 2017-02-12

Comitter:

ke_ix1

Date:

Sun Feb 12 10:34:03 2017 +0000

Parent:

7:fbaa5e70a60e

Commit message:

AirCon init

Changed in this revision

--- a/main.cpp	Fri Jan 06 07:24:16 2017 +0000
+++ b/main.cpp	Sun Feb 12 10:34:03 2017 +0000
@@ -49,12 +49,16 @@
 //#define TX_POWER_CALI                    -10
 //const static char     DEVICE_NAME[]        = "nRF51DK"; // change this
 
-#define TX_POWER_CALI                      -7
-const static char     DEVICE_NAME[]        = "51822"; // change this
+//#define TX_POWER_CALI                      -7
+//const static char     DEVICE_NAME[]        = "51822"; // change this
 
 //#define TX_POWER_CALI                    -15
 //const static char     DEVICE_NAME[]        = "Nano"; // change this
 
+#define TX_POWER_CALI                      -10
+const static char     DEVICE_NAME[]        = "MN4"; // change this
+
+
 //反映してない　二箇所設定変更する場所ある
 //static int tx_power = TX_POWER + TX_POWER_CALI;
 
@@ -66,6 +70,9 @@
 DigitalOut ledori1(LED1);
 //DFUService dfu(ble);
 
+PwmOut servo1(P0_23);
+//DigitalOut tran(P0_19);
+
 // The Nordic UART Service
 static const uint8_t uart_base_uuid[] = {0x71, 0x3D, 0, 0, 0x50, 0x3E, 0x4C, 0x75, 0xBA, 0x94, 0x31, 0x48, 0xF1, 0x8D, 0x94, 0x1E};
 static const uint8_t uart_tx_uuid[]   = {0x71, 0x3D, 0, 3, 0x50, 0x3E, 0x4C, 0x75, 0xBA, 0x94, 0x31, 0x48, 0xF1, 0x8D, 0x94, 0x1E};
@@ -83,14 +90,14 @@
 uint8_t mscPayload[TXRX_BUF_LEN] = {0,};
 static uint8_t msc_buf[TXRX_BUF_LEN];
 static uint8_t msc_len=0;
-GattCharacteristic  mscCharacteristic (msc_uuid, mscPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY); //tx power characteristic
+GattCharacteristic  mscCharacteristic (msc_uuid, mscPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ); //tx power characteristic
 
 // TX POWER用
 static const uint8_t power_level_uuid[]   = {0x71, 0x3D, 0, 4, 0x50, 0x3E, 0x4C, 0x75, 0xBA, 0x94, 0x31, 0x48, 0xF1, 0x8D, 0x94, 0x1E}; //central_TxPower受信用
 uint8_t powerPayload[TXRX_BUF_LEN] = {0,};
 static uint8_t power_buf[TXRX_BUF_LEN];
 static uint8_t power_len=0;
-GattCharacteristic  txPowerCharacteristic (power_level_uuid, powerPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY); //tx power characteristic
+GattCharacteristic  txPowerCharacteristic (power_level_uuid, powerPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ); //tx power characteristic
 Ticker txSteper;
 
 //Feature UUID
@@ -98,7 +105,7 @@
 uint8_t featurePayload[TXRX_BUF_LEN] = {0,};
 static uint8_t feature_buf[TXRX_BUF_LEN];
 static uint8_t feature_len=0;
-GattCharacteristic  featureCharacteristic (feature_uuid, featurePayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY); //tx power characteristic
+GattCharacteristic  featureCharacteristic (feature_uuid, featurePayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ); //tx power characteristic
 
 
 // Tx Power Service
@@ -122,7 +129,7 @@
 
 //Uart Service associated
 GattCharacteristic  txCharacteristic (uart_tx_uuid, txPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE);
-GattCharacteristic  rxCharacteristic (uart_rx_uuid, rxPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY);
+GattCharacteristic  rxCharacteristic (uart_rx_uuid, rxPayload, 1, TXRX_BUF_LEN, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ);
 GattCharacteristic *uartChars[] = {&txCharacteristic, &rxCharacteristic, &txPowerCharacteristic, &mscCharacteristic, &featureCharacteristic};
 GattService         uartService(uart_base_uuid, uartChars, sizeof(uartChars) / sizeof(GattCharacteristic *));
 
@@ -165,6 +172,16 @@
 //            if(led1 == 0) {
                 led1 = 1;
                 ledori1 = 0;
+                
+            //tran = 1;
+            //wait(0.5);
+            for(float pwidth=0.001; pwidth<=0.0013; pwidth+=0.0001) { // 1ms ~ 2ms
+              servo1.pulsewidth(pwidth); // pulse servo out
+              wait(0.25);
+            }
+            //wait(0.5);
+            //tran = 0;
+                
 //            } else {
 //                led1 = 0;
 //            }
@@ -204,7 +221,7 @@
     //ここから-------------
     char bufbuf_c[20];
     uint8_t bufbuf[40];
-    sprintf(bufbuf_c, "%s", "00000001");
+    sprintf(bufbuf_c, "%s", "00000007");
     //sprintf(bufbuf_c, "%d", "02f3f538-8d11-4802-b6fc-fb6616d4cd70");
     int a;
     for(a=0; bufbuf_c[a] != '\0'; a++) {
@@ -221,7 +238,7 @@
     //ここから-------------
     char bufbuf_c[20];
     uint8_t bufbuf[40];
-    sprintf(bufbuf_c, "%s", "Out.Led");
+    sprintf(bufbuf_c, "%s", "Out.AirCon");
     int a;
     for(a=0; bufbuf_c[a] != '\0'; a++) {
         bufbuf[a] = bufbuf_c[a];
@@ -232,10 +249,6 @@
 }
 
 
-void initChara() {
-    initMsc();
-    initFeature();
-}
 
 void txStep() {
     //ここから-------------
@@ -248,10 +261,14 @@
         bufbuf[a] = bufbuf_c[a];
     }
     ble.updateCharacteristicValue(txPowerCharacteristic.getValueAttribute().getHandle(), bufbuf, a);
-    initChara();
 }
 //-------------------
 
+void initChara() {
+    initMsc();
+    initFeature();
+    txStep();
+}
 
 void uartCB(void)
 {   
@@ -275,6 +292,16 @@
 
 int main(void)
 {
+    //tran = 1;
+    //float pwidth;
+    servo1.period_ms(20);// pulse cycle = 20ms
+    //servo1.pulsewidth(0.001);
+    wait(0.25);
+    for(float pwidth=0.001; pwidth<=0.0013; pwidth+=0.0001) { // 1ms ~ 2ms
+        servo1.pulsewidth(pwidth); // pulse servo out
+        wait(0.25);
+    }
+    
     led1 = 0;
     ledori1 = 0;
     ble.init();
@@ -319,14 +346,15 @@
     pc.printf("Advertising Start \r\n");
    
     //TX POWER用
-    txSteper.attach(&txStep, 2.0);
     txPowerUpdate(TX_POWER);
+    //txSteper.attach(&initChara, 1.0);
 
     initChara();
-
+    //wait(0.5);
+    //tran = 0;
     while(1)
     {
-        ble.waitForEvent(); 
+     ble.waitForEvent(); 
     }
 }