ENSMM / Mbed 2 deprecated BLE_Meuhve_Sensor

BLE test for specific board mheuve sensor ENSMM CROC

Dependencies:   mbed Driver_BLE_Mheuve BLE_API

Homepage

These two pictures show how to connect the Mheuve Sensor to the ST-Link debugger (don't forget to disable ST-link jumpers and JP5 on the board! ):

https://os.mbed.com/media/uploads/jimbaud/1611739514454.jpghttps://os.mbed.com/media/uploads/jimbaud/1611739514453.jpg

These two pictures show how to connect the Mheuve Sensor TX RX to the ST-Link debugger (don't forget to cross TX and RX, it means Mheuve sensor TX on ST-Link RX and ST-Link TX on Mheuve sensor RX ):

https://os.mbed.com/media/uploads/jimbaud/1611739514450.jpg https://os.mbed.com/media/uploads/jimbaud/1611739514452.jpg

The Mheuve sensor board needs to be powered by an external battery.

The result appears on a BLE terminal smartphone application (like BLE terminal on Android) under BLE UART specification data, it prints periodically "coucou".

https://os.mbed.com/media/uploads/jimbaud/screenshot_2021-01-27-10-53-36-782_com.mightyit.gops.bleterminal.jpg

All wikipages