Add support for Nucleo-F446RE
Dependencies: mbed
Diff: main.cpp
- Revision:
- 15:916032fc76c0
- Parent:
- 14:c7251480feb9
--- a/main.cpp Wed Feb 17 09:28:29 2016 +0000 +++ b/main.cpp Wed May 18 04:36:51 2016 +0000 @@ -1,10 +1,9 @@ #include "mbed.h" #include "main.h" #include "sx1276-hal.h" -#include "debug.h" /* Set this flag to '1' to display debug messages on the console */ -#define DEBUG_MESSAGE 0 +#define DEBUG_MESSAGE 1 /* Set this flag to '1' to use the LoRa modulation or to '0' to use FSK modulation */ #define USE_MODEM_LORA 1 @@ -100,7 +99,7 @@ uint8_t i; bool isMaster = true; - debug( "\n\n\r SX1276 Ping Pong Demo Application \n\n\r" ); + printf( "\n\n\r SX1276 Ping Pong Demo Application \n\n\r" ); // Initialize Radio driver RadioEvents.TxDone = OnTxDone; @@ -113,19 +112,14 @@ // verify the connection with the board while( Radio.Read( REG_VERSION ) == 0x00 ) { - debug( "Radio could not be detected!\n\r", NULL ); + printf( "Radio could not be detected!\n\r" ); wait( 1 ); } - - debug_if( ( DEBUG_MESSAGE & ( Radio.DetectBoardType( ) == SX1276MB1LAS ) ) , "\n\r > Board Type: SX1276MB1LAS < \n\r" ); - debug_if( ( DEBUG_MESSAGE & ( Radio.DetectBoardType( ) == SX1276MB1MAS ) ) , "\n\r > Board Type: SX1276MB1MAS < \n\r" ); + printf("RadioRegVersion: %d\r\n", Radio.Read( REG_VERSION )); Radio.SetChannel( RF_FREQUENCY ); #if USE_MODEM_LORA == 1 - - debug_if( LORA_FHSS_ENABLED, "\n\n\r > LORA FHSS Mode < \n\n\r"); - debug_if( !LORA_FHSS_ENABLED, "\n\n\r > LORA Mode < \n\n\r"); Radio.SetTxConfig( MODEM_LORA, TX_OUTPUT_POWER, 0, LORA_BANDWIDTH, LORA_SPREADING_FACTOR, LORA_CODINGRATE, @@ -140,8 +134,6 @@ LORA_IQ_INVERSION_ON, true ); #elif USE_MODEM_FSK == 1 - - debug("\n\n\r > FSK Mode < \n\n\r"); Radio.SetTxConfig( MODEM_FSK, TX_OUTPUT_POWER, FSK_FDEV, 0, FSK_DATARATE, 0, FSK_PREAMBLE_LENGTH, FSK_FIX_LENGTH_PAYLOAD_ON, @@ -158,7 +150,7 @@ #endif - debug_if( DEBUG_MESSAGE, "Starting Ping-Pong loop\r\n" ); + printf( "Starting Ping-Pong loop\r\n" ); led = 0; @@ -176,7 +168,7 @@ if( strncmp( ( const char* )Buffer, ( const char* )PongMsg, 4 ) == 0 ) { led = !led; - debug( "...Pong\r\n" ); + printf( "...Pong\r\n" ); // Send the next PING frame strcpy( ( char* )Buffer, ( char* )PingMsg ); // We fill the buffer with numbers for the payload @@ -189,7 +181,7 @@ } else if( strncmp( ( const char* )Buffer, ( const char* )PingMsg, 4 ) == 0 ) { // A master already exists then become a slave - debug( "...Ping\r\n" ); + printf( "...Ping\r\n" ); led = !led; isMaster = false; // Send the next PONG frame @@ -216,7 +208,7 @@ if( strncmp( ( const char* )Buffer, ( const char* )PingMsg, 4 ) == 0 ) { led = !led; - debug( "...Ping\r\n" ); + printf( "...Ping\r\n" ); // Send the reply to the PING string strcpy( ( char* )Buffer, ( char* )PongMsg ); // We fill the buffer with numbers for the payload @@ -240,11 +232,11 @@ led = !led; if( isMaster == true ) { - debug( "Ping...\r\n" ); + printf( "Ping...\r\n" ); } else { - debug( "Pong...\r\n" ); + printf( "Pong...\r\n" ); } Radio.Rx( RX_TIMEOUT_VALUE ); State = LOWPOWER; @@ -310,7 +302,7 @@ { Radio.Sleep( ); State = TX; - debug_if( DEBUG_MESSAGE, "> OnTxDone\n\r" ); + printf( "> OnTxDone\n\r" ); } void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr) @@ -321,14 +313,14 @@ RssiValue = rssi; SnrValue = snr; State = RX; - debug_if( DEBUG_MESSAGE, "> OnRxDone\n\r" ); + printf( "> OnRxDone\n\r" ); } void OnTxTimeout( void ) { Radio.Sleep( ); State = TX_TIMEOUT; - debug_if( DEBUG_MESSAGE, "> OnTxTimeout\n\r" ); + printf( "> OnTxTimeout\n\r" ); } void OnRxTimeout( void ) @@ -336,13 +328,13 @@ Radio.Sleep( ); Buffer[ BufferSize ] = 0; State = RX_TIMEOUT; - debug_if( DEBUG_MESSAGE, "> OnRxTimeout\n\r" ); + printf( "> OnRxTimeout\n\r" ); } void OnRxError( void ) { Radio.Sleep( ); State = RX_ERROR; - debug_if( DEBUG_MESSAGE, "> OnRxError\n\r" ); + printf( "> OnRxError\n\r" ); }