Diff: Gamepad/Gamepad.h

Revision:

0:72f372170a73

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Gamepad/Gamepad.h	Fri May 10 08:07:10 2019 +0000
@@ -0,0 +1,206 @@
+#ifndef GAMEPAD_H
+#define GAMEPAD_H
+
+#include <bitset>
+
+// Forward declaration of the classes that we use from the mbed library
+// This avoids the need for us to include the huge mbed.h header inside our
+// own library API
+
+namespace mbed
+{
+class AnalogIn;
+class InterruptIn;
+class PwmOut;
+class Timeout;
+}
+
+#define TOL 0.1f
+#define RAD2DEG 57.2957795131f
+
+/** Enum for direction */
+enum Direction {
+    CENTRE,  /**< joystick centred */
+    N,       /**< pushed North (0)*/
+    NE,      /**< pushed North-East (45) */
+    E,       /**< pushed East (90) */
+    SE,      /**< pushed South-East (135) */
+    S,       /**< pushed South (180) */
+    SW,      /**< pushed South-West (225) */
+    W,       /**< pushed West (270) */
+    NW       /**< pushed North-West (315) */
+};
+
+/** Vector 2D struct */
+struct Vector2D {
+    float x; /**< float for x value */
+    float y; /**< float for y value */
+};
+
+/** Polar coordinate struct */
+struct Polar {
+    float mag;  /**< float for magnitude */
+    float angle; /**< float for angle (in degrees) */
+};
+
+/** Gamepad Class
+ * @brief Library for interfacing with ELEC2645 Gamepad PCB, University of Leeds
+ * @author Dr Craig A. Evans
+ * @author Dr Alex Valavanis
+ */
+class Gamepad
+{
+public:
+/** Gamepad events 
+ * @brief List of events that can be registered on the gamepad
+ */
+enum GamepadEvent {
+    A_PRESSED,     ///< Button A has been pressed
+    B_PRESSED,     ///< Button B has been pressed
+    X_PRESSED,     ///< Button X has been pressed
+    Y_PRESSED,     ///< Button Y has been pressed
+    L_PRESSED,     ///< Button L has been pressed
+    R_PRESSED,     ///< Button R has been pressed
+    BACK_PRESSED,  ///< Button "Back" has been pressed
+    START_PRESSED, ///< Button "Start" has been pressed
+    JOY_PRESSED,   ///< Joystick button has been pressed
+    N_EVENTS       ///< A dummy flag that marks the end of the list
+};
+
+private:
+    mbed::PwmOut *_led1;
+    mbed::PwmOut *_led2;
+    mbed::PwmOut *_led3;
+    mbed::PwmOut *_led4;
+    mbed::PwmOut *_led5;
+    mbed::PwmOut *_led6;
+
+    mbed::InterruptIn *_button_A;
+    mbed::InterruptIn *_button_B;
+    mbed::InterruptIn *_button_X;
+    mbed::InterruptIn *_button_Y;
+    mbed::InterruptIn *_button_L;
+    mbed::InterruptIn *_button_R;
+    mbed::InterruptIn *_button_back;
+    mbed::InterruptIn *_button_start;
+    mbed::InterruptIn *_button_joystick;
+
+    mbed::AnalogIn *_vert;
+    mbed::AnalogIn *_horiz;
+
+    mbed::PwmOut   *_buzzer;
+    mbed::AnalogIn *_pot;
+
+    mbed::Timeout *_timeout;
+
+    std::bitset<N_EVENTS> _event_state; ///< A binary list of buttons that has been pressed
+
+    // centred x,y values
+    float _x0;
+    float _y0;
+
+public:
+    /** Constructor */
+    Gamepad();
+
+    /** Destructor */
+    ~Gamepad();
+
+    /** Initialise all peripherals and configure interrupts */
+    void init();
+
+    /** Turn all LEDs on */
+    void leds_on();
+
+    /** Turn all LEDs off */
+    void leds_off();
+
+    /** Set all LEDs to duty-cycle
+    *@param value in range 0.0 to 1.0
+    */
+    void leds(float val) const;
+
+    /** Set LED to duty-cycle
+    *@param led number (0 to 5)
+    *@param value in range 0.0 to 1.0
+    */
+    void led(int n,float val) const;
+
+    /** Read potentiometer
+    *@returns potentiometer value in range 0.0 to 1.0
+    */
+    float read_pot() const;
+
+    /** Play tone on piezo
+    * @param frequency in Hz
+    * @param duration of tone in seconds
+    */
+    void tone(float frequency, float duration);
+
+    /**
+     * @brief Check whether an event flag has been set and clear it
+     * @param id[in] The ID of the event to test
+     * @return true if the event occurred
+     */
+    bool check_event(GamepadEvent const id);
+
+    /**
+     * @brief   Get the raw binary event state
+     * @return  The event state as a binary code
+     * @details The check_event() function is likely to be more useful than
+     *          this, for testing whether a given event has occurred. It can be
+     *          useful for debugging via the terminal, however, for example:
+     *          @code
+     *          std::cout << gamepad.get_raw_event_state() << std::endl;
+     *          @endcode
+     */
+    inline std::bitset<N_EVENTS> get_raw_event_state() const {
+        return _event_state;
+    }
+
+    /** Get magnitude of joystick movement
+    * @returns value in range 0.0 to 1.0
+    */
+    float get_mag();
+
+    /** Get angle of joystick movement
+    * @returns value in range 0.0 to 359.9. 0.0 corresponds to N, 180.0 to S. -1.0 is central
+    */
+    float get_angle();
+
+    /** Gets joystick direction
+    * @returns an enum: CENTRE, N, NE, E, SE, S, SW, W, NW,
+    */
+    Direction get_direction();    // N,NE,E,SE etc.
+
+    /** Gets raw cartesian co-ordinates of joystick
+    * @returns a struct with x,y members, each in the range 0.0 to 1.0
+    */
+    Vector2D get_coord();         // cartesian co-ordinates x,y
+
+    /** Gets cartesian coordinates mapped to circular grid
+    * @returns a struct with x,y members, each in the range 0.0 to 1.0
+    */
+    Vector2D get_mapped_coord();  // x,y mapped to circle
+
+    /** Gets polar coordinates of the joystick
+    * @returns a struct contains mag and angle
+    */
+    Polar get_polar();            // mag and angle in struct form
+
+private:
+    void init_buttons();
+    void tone_off();
+
+    void a_isr();
+    void b_isr();
+    void x_isr();
+    void y_isr();
+    void l_isr();
+    void r_isr();
+    void back_isr();
+    void start_isr();
+    void joy_isr();
+};
+
+#endif
\ No newline at end of file