Diff: N5110/N5110.h

Revision:

1:bd92ef8d00ac

diff -r df4347043adf -r bd92ef8d00ac N5110/N5110.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/N5110/N5110.h	Thu May 04 14:08:31 2017 +0000
@@ -0,0 +1,502 @@
+#ifndef N5110_H
+#define N5110_H
+
+#include "mbed.h"
+
+// Command Bytes - taken from Chris Yan's library
+// More information can be found in the display datasheet
+// H = 0 - Basic instructions
+#define CMD_DC_CLEAR_DISPLAY   0x08
+#define CMD_DC_NORMAL_MODE     0x0C
+#define CMD_DC_FILL_DISPLAY    0x09
+#define CMD_DC_INVERT_VIDEO    0x0D
+#define CMD_FS_HORIZONTAL_MODE 0x00
+#define CMD_FS_VERTICAL_MODE   0x02
+#define CMD_FS_BASIC_MODE      0x00
+#define CMD_FS_EXTENDED_MODE   0x01
+#define CMD_FS_ACTIVE_MODE     0x00
+#define CMD_FS_POWER_DOWN_MODE 0x04
+// H = 1 - Extended instructions
+#define CMD_TC_TEMP_0          0x04
+#define CMD_TC_TEMP_1          0x05
+#define CMD_TC_TEMP_2          0x06
+#define CMD_TC_TEMP_3          0x07
+#define CMD_BI_MUX_24          0x15
+#define CMD_BI_MUX_48          0x13
+#define CMD_BI_MUX_100         0x10
+#define CMD_VOP_6V06           0xB2
+#define CMD_VOP_7V38           0xC8
+
+// number of pixels on display
+#define WIDTH 84
+#define HEIGHT 48
+#define BANKS 6
+
+/// Fill types for 2D shapes
+enum FillType {
+    FILL_TRANSPARENT, ///< Transparent with outline
+    FILL_BLACK,       ///< Filled black
+    FILL_WHITE,       ///< Filled white (no outline)
+};
+
+/** N5110 Class
+@brief Library for interfacing with Nokia 5110 LCD display (https://www.sparkfun.com/products/10168) using the hardware SPI on the mbed.
+@brief The display is powered from a GPIO pin meaning it can be controlled via software.  The LED backlight is also software-controllable (via PWM pin).
+@brief Can print characters and strings to the display using the included 5x7 font.
+@brief The library also implements a screen buffer so that individual pixels on the display (84 x 48) can be set, cleared and read.
+@brief The library can print primitive shapes (lines, circles, rectangles)
+@brief Acknowledgements to Chris Yan's Nokia_5110 Library.
+
+@brief Revision 1.3
+
+@author Craig A. Evans
+@date   7th February 2017
+
+@code
+
+#include "mbed.h"
+#include "N5110.h"
+
+//    VCC,SCE,RST,D/C,MOSI,SCLK,LED
+//N5110 lcd(p7,p8,p9,p10,p11,p13,p21);  // LPC1768 - pwr from GPIO
+N5110 lcd(PTC9,PTC0,PTC7,PTD2,PTD1,PTC11);  // K64F - pwr from 3V3
+
+int main()
+{
+    // first need to initialise display
+    lcd.init();
+
+    while(1) {
+
+        // these are default settings so not strictly needed
+        lcd.normalMode();      // normal colour mode
+        lcd.setBrightness(0.5); // put LED backlight on 50%
+
+        lcd.clear(); // clear buffer at start of every loop
+        // can directly print strings at specified co-ordinates (must be less than 84 pixels to fit on display)
+        lcd.printString("Hello, World!",0,0);
+
+        char buffer[14];  // each character is 6 pixels wide, screen is 84 pixels (84/6 = 14)
+        // so can display a string of a maximum 14 characters in length
+        // or create formatted strings - ensure they aren't more than 14 characters long
+        int temperature = 27;
+        int length = sprintf(buffer,"T = %2d C",temperature); // print formatted data to buffer
+        // it is important the format specifier ensures the length will fit in the buffer
+        if (length <= 14)  // if string will fit on display (assuming printing at x=0)
+            lcd.printString(buffer,0,1);           // display on screen
+
+        float pressure = 1012.3;  // same idea with floats
+        length = sprintf(buffer,"P = %.2f mb",pressure);
+        if (length <= 14)
+            lcd.printString(buffer,0,2);
+
+        // can also print individual characters at specified place
+        lcd.printChar('X',5,3);
+
+        // draw a line across the display at y = 40 pixels (origin top-left)
+        for (int i = 0; i < WIDTH; i++) {
+            lcd.setPixel(i,40);
+        }
+        // need to refresh display after setting pixels or writing strings
+        lcd.refresh();
+        wait(5.0);
+
+        // can check status of pixel using getPixel(x,y);
+        lcd.clear();  // clear buffer
+        lcd.setPixel(2,2);  // set random pixel in buffer
+        lcd.refresh();
+        wait(1.0);
+
+        int pixel_to_test = lcd.getPixel(2,2);
+
+        printf("2,2 Pixel value = %i\n",pixel_to_test);
+
+        if ( pixel_to_test ) {
+            lcd.printString("2,2 is set",0,4);
+        }
+
+        // this one shouldn't be set
+        pixel_to_test = lcd.getPixel(3,3);
+
+        printf("3,3 Pixel value = %i\n",pixel_to_test);
+
+        if ( pixel_to_test == 0 ) {
+            lcd.printString("3,3 is clear",0,5);
+        }
+
+        lcd.refresh();
+        wait(4.0);
+
+        lcd.clear();            // clear buffer
+        lcd.inverseMode();      // invert colours
+        lcd.setBrightness(1.0); // put LED backlight on full
+
+        float array[84];
+
+        for (int i = 0; i < 84; i++) {
+            array[i] = 0.5 + 0.5*sin(i*2*3.14/84);
+        }
+
+        // can also plot graphs - 84 elements only
+        // values must be in range 0.0 - 1.0
+        lcd.plotArray(array);
+        lcd.refresh();
+        wait(5.0);
+
+        lcd.clear();
+        lcd.normalMode();      // normal colour mode back
+        lcd.setBrightness(0.5); // put LED backlight on 50%
+
+        // example of drawing lines
+        for (int x = 0; x < WIDTH ; x+=10) {
+            // x0,y0,x1,y1,type 0-white,1-black,2-dotted
+            lcd.drawLine(0,0,x,HEIGHT,2);
+        }
+        lcd.refresh();  // refresh after drawing shapes
+        wait(5.0);
+
+
+        lcd.clear();
+        // example of how to draw circles
+        lcd.drawCircle(WIDTH/2,HEIGHT/2,20,FILL_BLACK);  // x,y,radius,black fill
+        lcd.drawCircle(WIDTH/2,HEIGHT/2,10,FILL_WHITE);  // x,y,radius,white fill
+        lcd.drawCircle(WIDTH/2,HEIGHT/2,30,FILL_TRANSPARENT);  // x,y,radius,transparent with outline
+        lcd.refresh();  // refresh after drawing shapes
+        wait(5.0);
+
+        lcd.clear();
+        // example of how to draw rectangles
+        //          origin x,y,width,height,type
+        lcd.drawRect(10,10,50,30,FILL_BLACK);  // filled black rectangle
+        lcd.drawRect(15,15,20,10,FILL_WHITE);  // filled white rectange (no outline)
+        lcd.drawRect(2,2,70,40,  FILL_TRANSPARENT);    // transparent, just outline
+        lcd.refresh();  // refresh after drawing shapes
+        wait(5.0);
+    }
+}
+
+@endcode
+*/
+class N5110
+{
+private:
+// objects
+    SPI         *_spi;
+    PwmOut      *_led;
+    DigitalOut  *_pwr;
+    DigitalOut  *_sce;
+    DigitalOut  *_rst;
+    DigitalOut  *_dc;
+
+// variables
+    unsigned char buffer[84][6];  // screen buffer - the 6 is for the banks - each one is 8 bits;
+
+public:
+    /** Create a N5110 object connected to the specified pins
+    *
+    * @param pwr  Pin connected to Vcc on the LCD display (pin 1)
+    * @param sce  Pin connected to chip enable (pin 3)
+    * @param rst  Pin connected to reset (pin 4)
+    * @param dc   Pin connected to data/command select (pin 5)
+    * @param mosi Pin connected to data input (MOSI) (pin 6)
+    * @param sclk Pin connected to serial clock (SCLK) (pin 7)
+    * @param led  Pin connected to LED backlight (must be PWM) (pin 8)
+    *
+    */
+    N5110(PinName const pwrPin,
+          PinName const scePin,
+          PinName const rstPin,
+          PinName const dcPin,
+          PinName const mosiPin,
+          PinName const sclkPin,
+          PinName const ledPin);
+
+    /** Create a N5110 object connected to the specified pins (Vcc to +3V3)
+    *
+    * @param sce  Pin connected to chip enable (pin 3)
+    * @param rst  Pin connected to reset (pin 4)
+    * @param dc   Pin connected to data/command select (pin 5)
+    * @param mosi Pin connected to data input (MOSI) (pin 6)
+    * @param sclk Pin connected to serial clock (SCLK) (pin 7)
+    * @param led  Pin connected to LED backlight (must be PWM) (pin 8)
+    *
+    */
+    N5110(PinName const scePin,
+          PinName const rstPin,
+          PinName const dcPin,
+          PinName const mosiPin,
+          PinName const sclkPin,
+          PinName const ledPin);
+
+    /**
+     * Free allocated memory when object goes out of scope
+     */
+    ~N5110();
+
+    /** Initialise display
+    *
+    *   Powers up the display and turns on backlight (50% brightness default).
+    *   Sets the display up in horizontal addressing mode and with normal video mode.
+    */
+    void init();
+
+    /** Turn off
+    *
+    *   Powers down the display and turns of the backlight.
+    *   Needs to be reinitialised before being re-used.
+    */
+    void turnOff();
+
+    /** Clear
+    *
+    *   Clears the screen buffer.
+    */
+    void clear();
+
+    /** Turn on normal video mode (default)
+    *  Black on white
+    */
+    void normalMode();
+
+    /** Turn on inverse video mode (default)
+    *  White on black
+    */
+    void inverseMode();
+
+    /** Set Brightness
+    *
+    *   Sets brightness of LED backlight.
+    *   @param brightness - float in range 0.0 to 1.0
+    */
+    void setBrightness(float const brightness);
+
+    /** Print String
+    *
+    *   Prints a string of characters to the screen buffer. String is cut-off after the 83rd pixel.
+    *   @param x - the column number (0 to 83)
+    *   @param y - the row number (0 to 5) - the display is split into 6 banks - each bank can be considered a row
+    */
+    void printString(char const         *str,
+                     unsigned int const  x,
+                     unsigned int const  y);
+
+    /** Print Character
+    *
+    *   Sends a character to the screen buffer.  Printed at the specified location. Character is cut-off after the 83rd pixel.
+    *   @param  c - the character to print. Can print ASCII as so printChar('C').
+    *   @param x - the column number (0 to 83)
+    *   @param y - the row number (0 to 5) - the display is split into 6 banks - each bank can be considered a row
+    */
+    void printChar(char const         c,
+                   unsigned int const x,
+                   unsigned int const y);
+
+    /** Set a Pixel
+    *
+    *   This function sets a pixel in the screen buffer.
+    *   @param  x - the x co-ordinate of the pixel (0 to 83)
+    *   @param  y - the y co-ordinate of the pixel (0 to 47)
+    */
+    void setPixel(unsigned int const x,
+                  unsigned int const y);
+
+    /** Clear a Pixel
+    *
+    *   This function clears pixel in the screen buffer
+    *   @param  x - the x co-ordinate of the pixel (0 to 83)
+    *   @param  y - the y co-ordinate of the pixel (0 to 47)
+    */
+    void clearPixel(unsigned int const x,
+                    unsigned int const y);
+
+    /** Get a Pixel
+    *
+    *   This function gets the status of a pixel in the screen buffer.
+    *   @param  x - the x co-ordinate of the pixel (0 to 83)
+    *   @param  y - the y co-ordinate of the pixel (0 to 47)
+    *   @returns
+    *       0           - pixel is clear
+    *       1    - pixel is set
+    */
+    int getPixel(unsigned int const x,
+                 unsigned int const y) const;
+
+    /** Refresh display
+    *
+    *   This functions sends the screen buffer to the display.
+    */
+    void refresh();
+
+    /** Randomise buffer
+    *
+    *   This function fills the buffer with random data.  Can be used to test the display.
+    *   A call to refresh() must be made to update the display to reflect the change in pixels.
+    *   The seed is not set and so the generated pattern will probably be the same each time.
+    *   TODO: Randomise the seed - maybe using the noise on the AnalogIn pins.
+    */
+    void randomiseBuffer();
+
+    /** Plot Array
+    *
+    *   This function plots a one-dimensional array in the buffer.
+    *   @param array[] - y values of the plot. Values should be normalised in the range 0.0 to 1.0. First 84 plotted.
+    */
+    void plotArray(float const array[]);
+
+    /** Draw Circle
+    *
+    *   This function draws a circle at the specified origin with specified radius in the screen buffer
+    *   Uses the midpoint circle algorithm.
+    *   @see http://en.wikipedia.org/wiki/Midpoint_circle_algorithm
+    *   @param  x0     - x-coordinate of centre
+    *   @param  y0     - y-coordinate of centre
+    *   @param  radius - radius of circle in pixels
+    *   @param  fill   - fill-type for the shape
+    */
+    void drawCircle(unsigned int const x0,
+                    unsigned int const y0,
+                    unsigned int const radius,
+                    FillType const     fill);
+
+    /** Draw Line
+    *
+    *   This function draws a line between the specified points using linear interpolation.
+    *   @param  x0 - x-coordinate of first point
+    *   @param  y0 - y-coordinate of first point
+    *   @param  x1 - x-coordinate of last point
+    *   @param  y1 - y-coordinate of last point
+    *   @param  type - 0 white,1 black,2 dotted
+    */
+    void drawLine(unsigned int const x0,
+                  unsigned int const y0,
+                  unsigned int const x1,
+                  unsigned int const y1,
+                  unsigned int const type);
+
+    /** Draw Rectangle
+    *
+    *   This function draws a rectangle.
+    *   @param  x0 - x-coordinate of origin (top-left)
+    *   @param  y0 - y-coordinate of origin (top-left)
+    *   @param  width - width of rectangle
+    *   @param  height - height of rectangle
+    *   @param  fill   - fill-type for the shape
+    */
+    void drawRect(unsigned int const x0,
+                  unsigned int const y0,
+                  unsigned int const width,
+                  unsigned int const height,
+                  FillType const     fill);
+
+private:
+// methods
+    void setXYAddress(unsigned int const x,
+                      unsigned int const y);
+    void initSPI();
+    void turnOn();
+    void reset();
+    void clearRAM();
+    void sendCommand(unsigned char command);
+    void sendData(unsigned char data);
+};
+
+const unsigned char font5x7[480] = {
+    0x00, 0x00, 0x00, 0x00, 0x00,// (space)
+    0x00, 0x00, 0x5F, 0x00, 0x00,// !
+    0x00, 0x07, 0x00, 0x07, 0x00,// "
+    0x14, 0x7F, 0x14, 0x7F, 0x14,// #
+    0x24, 0x2A, 0x7F, 0x2A, 0x12,// $
+    0x23, 0x13, 0x08, 0x64, 0x62,// %
+    0x36, 0x49, 0x55, 0x22, 0x50,// &
+    0x00, 0x05, 0x03, 0x00, 0x00,// '
+    0x00, 0x1C, 0x22, 0x41, 0x00,// (
+    0x00, 0x41, 0x22, 0x1C, 0x00,// )
+    0x08, 0x2A, 0x1C, 0x2A, 0x08,// *
+    0x08, 0x08, 0x3E, 0x08, 0x08,// +
+    0x00, 0x50, 0x30, 0x00, 0x00,// ,
+    0x08, 0x08, 0x08, 0x08, 0x08,// -
+    0x00, 0x60, 0x60, 0x00, 0x00,// .
+    0x20, 0x10, 0x08, 0x04, 0x02,// /
+    0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
+    0x00, 0x42, 0x7F, 0x40, 0x00,// 1
+    0x42, 0x61, 0x51, 0x49, 0x46,// 2
+    0x21, 0x41, 0x45, 0x4B, 0x31,// 3
+    0x18, 0x14, 0x12, 0x7F, 0x10,// 4
+    0x27, 0x45, 0x45, 0x45, 0x39,// 5
+    0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
+    0x01, 0x71, 0x09, 0x05, 0x03,// 7
+    0x36, 0x49, 0x49, 0x49, 0x36,// 8
+    0x06, 0x49, 0x49, 0x29, 0x1E,// 9
+    0x00, 0x36, 0x36, 0x00, 0x00,// :
+    0x00, 0x56, 0x36, 0x00, 0x00,// ;
+    0x00, 0x08, 0x14, 0x22, 0x41,// <
+    0x14, 0x14, 0x14, 0x14, 0x14,// =
+    0x41, 0x22, 0x14, 0x08, 0x00,// >
+    0x02, 0x01, 0x51, 0x09, 0x06,// ?
+    0x32, 0x49, 0x79, 0x41, 0x3E,// @
+    0x7E, 0x11, 0x11, 0x11, 0x7E,// A
+    0x7F, 0x49, 0x49, 0x49, 0x36,// B
+    0x3E, 0x41, 0x41, 0x41, 0x22,// C
+    0x7F, 0x41, 0x41, 0x22, 0x1C,// D
+    0x7F, 0x49, 0x49, 0x49, 0x41,// E
+    0x7F, 0x09, 0x09, 0x01, 0x01,// F
+    0x3E, 0x41, 0x41, 0x51, 0x32,// G
+    0x7F, 0x08, 0x08, 0x08, 0x7F,// H
+    0x00, 0x41, 0x7F, 0x41, 0x00,// I
+    0x20, 0x40, 0x41, 0x3F, 0x01,// J
+    0x7F, 0x08, 0x14, 0x22, 0x41,// K
+    0x7F, 0x40, 0x40, 0x40, 0x40,// L
+    0x7F, 0x02, 0x04, 0x02, 0x7F,// M
+    0x7F, 0x04, 0x08, 0x10, 0x7F,// N
+    0x3E, 0x41, 0x41, 0x41, 0x3E,// O
+    0x7F, 0x09, 0x09, 0x09, 0x06,// P
+    0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
+    0x7F, 0x09, 0x19, 0x29, 0x46,// R
+    0x46, 0x49, 0x49, 0x49, 0x31,// S
+    0x01, 0x01, 0x7F, 0x01, 0x01,// T
+    0x3F, 0x40, 0x40, 0x40, 0x3F,// U
+    0x1F, 0x20, 0x40, 0x20, 0x1F,// V
+    0x7F, 0x20, 0x18, 0x20, 0x7F,// W
+    0x63, 0x14, 0x08, 0x14, 0x63,// X
+    0x03, 0x04, 0x78, 0x04, 0x03,// Y
+    0x61, 0x51, 0x49, 0x45, 0x43,// Z
+    0x00, 0x00, 0x7F, 0x41, 0x41,// [
+    0x02, 0x04, 0x08, 0x10, 0x20,// "\"
+    0x41, 0x41, 0x7F, 0x00, 0x00,// ]
+    0x04, 0x02, 0x01, 0x02, 0x04,// ^
+    0x40, 0x40, 0x40, 0x40, 0x40,// _
+    0x00, 0x01, 0x02, 0x04, 0x00,// `
+    0x20, 0x54, 0x54, 0x54, 0x78,// a
+    0x7F, 0x48, 0x44, 0x44, 0x38,// b
+    0x38, 0x44, 0x44, 0x44, 0x20,// c
+    0x38, 0x44, 0x44, 0x48, 0x7F,// d
+    0x38, 0x54, 0x54, 0x54, 0x18,// e
+    0x08, 0x7E, 0x09, 0x01, 0x02,// f
+    0x08, 0x14, 0x54, 0x54, 0x3C,// g
+    0x7F, 0x08, 0x04, 0x04, 0x78,// h
+    0x00, 0x44, 0x7D, 0x40, 0x00,// i
+    0x20, 0x40, 0x44, 0x3D, 0x00,// j
+    0x00, 0x7F, 0x10, 0x28, 0x44,// k
+    0x00, 0x41, 0x7F, 0x40, 0x00,// l
+    0x7C, 0x04, 0x18, 0x04, 0x78,// m
+    0x7C, 0x08, 0x04, 0x04, 0x78,// n
+    0x38, 0x44, 0x44, 0x44, 0x38,// o
+    0x7C, 0x14, 0x14, 0x14, 0x08,// p
+    0x08, 0x14, 0x14, 0x18, 0x7C,// q
+    0x7C, 0x08, 0x04, 0x04, 0x08,// r
+    0x48, 0x54, 0x54, 0x54, 0x20,// s
+    0x04, 0x3F, 0x44, 0x40, 0x20,// t
+    0x3C, 0x40, 0x40, 0x20, 0x7C,// u
+    0x1C, 0x20, 0x40, 0x20, 0x1C,// v
+    0x3C, 0x40, 0x30, 0x40, 0x3C,// w
+    0x44, 0x28, 0x10, 0x28, 0x44,// x
+    0x0C, 0x50, 0x50, 0x50, 0x3C,// y
+    0x44, 0x64, 0x54, 0x4C, 0x44,// z
+    0x00, 0x08, 0x36, 0x41, 0x00,// {
+    0x00, 0x00, 0x7F, 0x00, 0x00,// |
+    0x00, 0x41, 0x36, 0x08, 0x00,// }
+    0x08, 0x08, 0x2A, 0x1C, 0x08,// ->
+    0x08, 0x1C, 0x2A, 0x08, 0x08 // <-
+};
+
+#endif
\ No newline at end of file