File content as of revision 0:b74591d5ab33:

/* NetworkStack
 * Copyright (c) 2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef NETWORK_STACK_H
#define NETWORK_STACK_H

#include "nsapi_types.h"
#include "netsocket/SocketAddress.h"
#include "netsocket/NetworkInterface.h"


/** NetworkStack class
 *
 *  Common interface that is shared between hardware that
 *  can connect to a network over IP. By implementing the
 *  NetworkStack, a network stack can be used as a target
 *  for instantiating network sockets.
 *  @addtogroup netsocket
 */
class NetworkStack
{
public:
    virtual ~NetworkStack() {};

    /** Get the local IP address
     *
     *  @return         Null-terminated representation of the local IP address
     *                  or null if not yet connected
     */
    virtual const char *get_ip_address() = 0;

    /** Translates a hostname to an IP address with specific version
     *
     *  The hostname may be either a domain name or an IP address. If the
     *  hostname is an IP address, no network transactions will be performed.
     *
     *  If no stack-specific DNS resolution is provided, the hostname
     *  will be resolve using a UDP socket on the stack.
     *
     *  @param host     Hostname to resolve
     *  @param address  Destination for the host SocketAddress
     *  @param version  IP version of address to resolve, NSAPI_UNSPEC indicates
     *                  version is chosen by the stack (defaults to NSAPI_UNSPEC)
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t gethostbyname(const char *host,
            SocketAddress *address, nsapi_version_t version = NSAPI_UNSPEC);

    /** Add a domain name server to list of servers to query
     *
     *  @param address  Destination for the host address
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t add_dns_server(const SocketAddress &address);

    /*  Set stack options
     *
     *  setstackopt allows an application to pass stack-specific options
     *  to the underlying stack using stack-specific level and option names,
     *  or to request generic options using levels from nsapi_stack_level_t.
     *
     *  For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned
     *  and the stack is unmodified.
     *
     *  @param level    Stack-specific protocol level or nsapi_stack_level_t
     *  @param optname  Level-specific option name
     *  @param optval   Option value
     *  @param optlen   Length of the option value
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t setstackopt(int level, int optname, const void *optval, unsigned optlen);

    /*  Get stack options
     *
     *  getstackopt allows an application to retrieve stack-specific options
     *  to the underlying stack using stack-specific level and option names,
     *  or to request generic options using levels from nsapi_stack_level_t.
     *
     *  @param level    Stack-specific protocol level or nsapi_stack_level_t
     *  @param optname  Level-specific option name
     *  @param optval   Destination for option value
     *  @param optlen   Length of the option value
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t getstackopt(int level, int optname, void *optval, unsigned *optlen);

protected:
    friend class Socket;
    friend class UDPSocket;
    friend class TCPSocket;
    friend class TCPServer;

    /** Opens a socket
     *
     *  Creates a network socket and stores it in the specified handle.
     *  The handle must be passed to following calls on the socket.
     *
     *  A stack may have a finite number of sockets, in this case
     *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
     *
     *  @param handle   Destination for the handle to a newly created socket
     *  @param proto    Protocol of socket to open, NSAPI_TCP or NSAPI_UDP
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t socket_open(nsapi_socket_t *handle, nsapi_protocol_t proto) = 0;

    /** Close the socket
     *
     *  Closes any open connection and deallocates any memory associated
     *  with the socket.
     *
     *  @param handle   Socket handle
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t socket_close(nsapi_socket_t handle) = 0;

    /** Bind a specific address to a socket
     *
     *  Binding a socket specifies the address and port on which to recieve
     *  data. If the IP address is zeroed, only the port is bound.
     *
     *  @param handle   Socket handle
     *  @param address  Local address to bind
     *  @return         0 on success, negative error code on failure.
     */
    virtual nsapi_error_t socket_bind(nsapi_socket_t handle, const SocketAddress &address) = 0;

    /** Listen for connections on a TCP socket
     *
     *  Marks the socket as a passive socket that can be used to accept
     *  incoming connections.
     *
     *  @param handle   Socket handle
     *  @param backlog  Number of pending connections that can be queued
     *                  simultaneously
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog) = 0;

    /** Connects TCP socket to a remote host
     *
     *  Initiates a connection to a remote server specified by the
     *  indicated address.
     *
     *  @param handle   Socket handle
     *  @param address  The SocketAddress of the remote host
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t socket_connect(nsapi_socket_t handle, const SocketAddress &address) = 0;

    /** Accepts a connection on a TCP socket
     *
     *  The server socket must be bound and set to listen for connections.
     *  On a new connection, creates a network socket and stores it in the
     *  specified handle. The handle must be passed to following calls on
     *  the socket.
     *
     *  A stack may have a finite number of sockets, in this case
     *  NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
     *
     *  This call is non-blocking. If accept would block,
     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
     *
     *  @param server   Socket handle to server to accept from
     *  @param handle   Destination for a handle to the newly created socket
     *  @param address  Destination for the remote address or NULL
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t socket_accept(nsapi_socket_t server,
            nsapi_socket_t *handle, SocketAddress *address=0) = 0;

    /** Send data over a TCP socket
     *
     *  The socket must be connected to a remote host. Returns the number of
     *  bytes sent from the buffer.
     *
     *  This call is non-blocking. If send would block,
     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
     *
     *  @param handle   Socket handle
     *  @param data     Buffer of data to send to the host
     *  @param size     Size of the buffer in bytes
     *  @return         Number of sent bytes on success, negative error
     *                  code on failure
     */
    virtual nsapi_size_or_error_t socket_send(nsapi_socket_t handle,
            const void *data, nsapi_size_t size) = 0;

    /** Receive data over a TCP socket
     *
     *  The socket must be connected to a remote host. Returns the number of
     *  bytes received into the buffer.
     *
     *  This call is non-blocking. If recv would block,
     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
     *
     *  @param handle   Socket handle
     *  @param data     Destination buffer for data received from the host
     *  @param size     Size of the buffer in bytes
     *  @return         Number of received bytes on success, negative error
     *                  code on failure
     */
    virtual nsapi_size_or_error_t socket_recv(nsapi_socket_t handle,
            void *data, nsapi_size_t size) = 0;

    /** Send a packet over a UDP socket
     *
     *  Sends data to the specified address. Returns the number of bytes
     *  sent from the buffer.
     *
     *  This call is non-blocking. If sendto would block,
     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
     *
     *  @param handle   Socket handle
     *  @param address  The SocketAddress of the remote host
     *  @param data     Buffer of data to send to the host
     *  @param size     Size of the buffer in bytes
     *  @return         Number of sent bytes on success, negative error
     *                  code on failure
     */
    virtual nsapi_size_or_error_t socket_sendto(nsapi_socket_t handle, const SocketAddress &address,
            const void *data, nsapi_size_t size) = 0;

    /** Receive a packet over a UDP socket
     *
     *  Receives data and stores the source address in address if address
     *  is not NULL. Returns the number of bytes received into the buffer.
     *
     *  This call is non-blocking. If recvfrom would block,
     *  NSAPI_ERROR_WOULD_BLOCK is returned immediately.
     *
     *  @param handle   Socket handle
     *  @param address  Destination for the source address or NULL
     *  @param buffer   Destination buffer for data received from the host
     *  @param size     Size of the buffer in bytes
     *  @return         Number of received bytes on success, negative error
     *                  code on failure
     */
    virtual nsapi_size_or_error_t socket_recvfrom(nsapi_socket_t handle, SocketAddress *address,
            void *buffer, nsapi_size_t size) = 0;

    /** Register a callback on state change of the socket
     *
     *  The specified callback will be called on state changes such as when
     *  the socket can recv/send/accept successfully and on when an error
     *  occurs. The callback may also be called spuriously without reason.
     *
     *  The callback may be called in an interrupt context and should not
     *  perform expensive operations such as recv/send calls.
     *
     *  @param handle   Socket handle
     *  @param callback Function to call on state change
     *  @param data     Argument to pass to callback
     */
    virtual void socket_attach(nsapi_socket_t handle, void (*callback)(void *), void *data) = 0;

    /*  Set stack-specific socket options
     *
     *  The setsockopt allow an application to pass stack-specific hints
     *  to the underlying stack. For unsupported options,
     *  NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
     *
     *  @param handle   Socket handle
     *  @param level    Stack-specific protocol level
     *  @param optname  Stack-specific option identifier
     *  @param optval   Option value
     *  @param optlen   Length of the option value
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t setsockopt(nsapi_socket_t handle, int level,
            int optname, const void *optval, unsigned optlen);

    /*  Get stack-specific socket options
     *
     *  The getstackopt allow an application to retrieve stack-specific hints
     *  from the underlying stack. For unsupported options,
     *  NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
     *
     *  @param handle   Socket handle
     *  @param level    Stack-specific protocol level
     *  @param optname  Stack-specific option identifier
     *  @param optval   Destination for option value
     *  @param optlen   Length of the option value
     *  @return         0 on success, negative error code on failure
     */
    virtual nsapi_error_t getsockopt(nsapi_socket_t handle, int level,
            int optname, void *optval, unsigned *optlen);
};


/** Convert a raw nsapi_stack_t object into a C++ NetworkStack object
 *
 *  @param stack    Reference to an object that can be converted to a stack
 *                  - A raw nsapi_stack_t object
 *                  - A reference to a network stack
 *                  - A reference to a network interface
 *  @return         Reference to the underlying network stack
 */
NetworkStack *nsapi_create_stack(nsapi_stack_t *stack);
NetworkStack *nsapi_create_stack(NetworkStack *stack);

template <typename IF>
NetworkStack *nsapi_create_stack(IF *iface)
{
    return nsapi_create_stack(static_cast<NetworkInterface *>(iface)->get_stack());
}


#endif