Dependents:   cobaLCDJoyMotor_Thread odometry_omni_3roda_v3 odometry_omni_3roda_v1 odometry_omni_3roda_v2 ... more

features/mbedtls/targets/TARGET_STM/sha256_alt.c

Committer:
be_bryan
Date:
2017-12-11
Revision:
0:b74591d5ab33

File content as of revision 0:b74591d5ab33:

/*
 *  sha256_alt.c for SHA256 HASH
 *******************************************************************************
 * Copyright (c) 2017, STMicroelectronics
 *  SPDX-License-Identifier: Apache-2.0
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may
 *  not use this file except in compliance with the License.
 *  You may obtain a copy of the License at
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 */
#include "mbedtls/sha256.h"

#if defined(MBEDTLS_SHA256_ALT)
#include "mbedtls/platform.h"

/* Implementation that should never be optimized out by the compiler */
static void mbedtls_zeroize( void *v, size_t n ) {
    volatile unsigned char *p = v; while( n-- ) *p++ = 0;
}

static int st_sha256_restore_hw_context(mbedtls_sha256_context *ctx)
{
    uint32_t i;
    uint32_t tickstart;
    /* allow multi-instance of HASH use: save context for HASH HW module CR */
    /* Check that there is no HASH activity on going */
    tickstart = HAL_GetTick();
    while ((HASH->SR & (HASH_FLAG_BUSY | HASH_FLAG_DMAS)) != 0) {
        if ((HAL_GetTick() - tickstart) > ST_SHA256_TIMEOUT) {
            return 0; // timeout: HASH processor is busy
        }
    }
    HASH->STR = ctx->ctx_save_str;
    HASH->CR = (ctx->ctx_save_cr | HASH_CR_INIT);
    for (i=0;i<38;i++) {
        HASH->CSR[i] = ctx->ctx_save_csr[i];
    }
    return 1;
}

static int st_sha256_save_hw_context(mbedtls_sha256_context *ctx)
{
    uint32_t i;
    uint32_t tickstart;
    /* Check that there is no HASH activity on going */
    tickstart = HAL_GetTick();
    while ((HASH->SR & (HASH_FLAG_BUSY | HASH_FLAG_DMAS)) != 0) {
        if ((HAL_GetTick() - tickstart) > ST_SHA256_TIMEOUT) {
            return 0; // timeout: HASH processor is busy
        }
    }
    /* allow multi-instance of HASH use: restore context for HASH HW module CR */
    ctx->ctx_save_cr = HASH->CR;
    ctx->ctx_save_str = HASH->STR;
    for (i=0;i<38;i++) {
        ctx->ctx_save_csr[i] = HASH->CSR[i];
    }
    return 1;
}

void mbedtls_sha256_init( mbedtls_sha256_context *ctx )
{
    mbedtls_zeroize( ctx, sizeof( mbedtls_sha256_context ) );

    /* Enable HASH clock */
    __HAL_RCC_HASH_CLK_ENABLE();
}

void mbedtls_sha256_free( mbedtls_sha256_context *ctx )
{
    if( ctx == NULL )
        return;
    mbedtls_zeroize( ctx, sizeof( mbedtls_sha256_context ) );
}

void mbedtls_sha256_clone( mbedtls_sha256_context *dst,
                         const mbedtls_sha256_context *src )
{
    *dst = *src;
}

void mbedtls_sha256_starts( mbedtls_sha256_context *ctx, int is224 )
{
    /* HASH IP initialization */
    if (HAL_HASH_DeInit(&ctx->hhash_sha256) == HAL_ERROR) {
        // error found to be returned
        return;
    }

    ctx->is224 = is224;
    /* HASH Configuration */
    ctx->hhash_sha256.Init.DataType = HASH_DATATYPE_8B;
    /* clear CR ALGO value */
    HASH->CR &= ~HASH_CR_ALGO_Msk;
    if (HAL_HASH_Init(&ctx->hhash_sha256) == HAL_ERROR) {
        // error found to be returned
        return;
    }
    if (st_sha256_save_hw_context(ctx) != 1) {
        return; // return HASH_BUSY timeout Error here
    }
}

void mbedtls_sha256_process( mbedtls_sha256_context *ctx, const unsigned char data[ST_SHA256_BLOCK_SIZE] )
{
    if (st_sha256_restore_hw_context(ctx) != 1) {
        return; // Return HASH_BUSY timout error here
    }
    if (ctx->is224 == 0) {
        if (HAL_HASHEx_SHA256_Accumulate(&ctx->hhash_sha256, (uint8_t *) data, ST_SHA256_BLOCK_SIZE) != 0) {
            return; // Return error code
        }
    } else {
        if (HAL_HASHEx_SHA224_Accumulate(&ctx->hhash_sha256, (uint8_t *) data, ST_SHA256_BLOCK_SIZE) != 0) {
            return; // Return error code
        }
    }

    if (st_sha256_save_hw_context(ctx) != 1) {
        return; // return HASH_BUSY timeout Error here
    }
}

void mbedtls_sha256_update( mbedtls_sha256_context *ctx, const unsigned char *input, size_t ilen )
{
    size_t currentlen = ilen;
    if (st_sha256_restore_hw_context(ctx) != 1) {
        return; // Return HASH_BUSY timout error here
    }

    // store mechanism to accumulate ST_SHA256_BLOCK_SIZE bytes (512 bits) in the HW
    if (currentlen == 0) { // only change HW status is size if 0
        if(ctx->hhash_sha256.Phase == HAL_HASH_PHASE_READY) {
            /* Select the SHA256 or SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
             the message digest of a new message */
            if (ctx->is224 == 0) {
                HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
            } else {
                HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
            }
        }
        ctx->hhash_sha256.Phase = HAL_HASH_PHASE_PROCESS;
    } else if (currentlen < (ST_SHA256_BLOCK_SIZE - ctx->sbuf_len)) {
        // only buffurize
        memcpy(ctx->sbuf + ctx->sbuf_len, input, currentlen);
        ctx->sbuf_len += currentlen;
    } else {
        // fill buffer and process it
        memcpy(ctx->sbuf + ctx->sbuf_len, input, (ST_SHA256_BLOCK_SIZE - ctx->sbuf_len));
        currentlen -= (ST_SHA256_BLOCK_SIZE - ctx->sbuf_len);
        mbedtls_sha256_process(ctx, ctx->sbuf);
        // Process every input as long as it is %64 bytes, ie 512 bits
        size_t iter = currentlen / ST_SHA256_BLOCK_SIZE;
        if (iter !=0) {
            if (ctx->is224 == 0) {
                if (HAL_HASHEx_SHA256_Accumulate(&ctx->hhash_sha256, (uint8_t *)(input + ST_SHA256_BLOCK_SIZE - ctx->sbuf_len),  (iter * ST_SHA256_BLOCK_SIZE)) != 0) {
                    return; // Return error code here
                }
            } else {
                if (HAL_HASHEx_SHA224_Accumulate(&ctx->hhash_sha256, (uint8_t *)(input + ST_SHA256_BLOCK_SIZE - ctx->sbuf_len),  (iter * ST_SHA256_BLOCK_SIZE)) != 0) {
                    return; // Return error code here
                }
            }
        }
        // sbuf is completely accumulated, now copy up to 63 remaining bytes
        ctx->sbuf_len = currentlen % ST_SHA256_BLOCK_SIZE;
        if (ctx->sbuf_len !=0) {
            memcpy(ctx->sbuf, input + ilen - ctx->sbuf_len, ctx->sbuf_len);
        }
    }
    if (st_sha256_save_hw_context(ctx) != 1) {
        return; // return HASH_BUSY timeout Error here
    }
}

void mbedtls_sha256_finish( mbedtls_sha256_context *ctx, unsigned char output[32] )
{
    if (st_sha256_restore_hw_context(ctx) != 1) {
        return; // Return HASH_BUSY timout error here
    }
    if (ctx->sbuf_len > 0) {
        if (ctx->is224 == 0) {
            if (HAL_HASHEx_SHA256_Accumulate(&ctx->hhash_sha256, ctx->sbuf, ctx->sbuf_len) != 0) {
                return; // Return error code here
            }
        } else {
            if (HAL_HASHEx_SHA224_Accumulate(&ctx->hhash_sha256, ctx->sbuf, ctx->sbuf_len) != 0) {
                return; // Return error code here
            }
        }
    }
    mbedtls_zeroize(ctx->sbuf, ST_SHA256_BLOCK_SIZE);
    ctx->sbuf_len = 0;
    __HAL_HASH_START_DIGEST();

    if (ctx->is224 == 0) {
        if (HAL_HASHEx_SHA256_Finish(&ctx->hhash_sha256, output, 10) != 0) {
            return; // Return error code here
        }
    } else {
        if (HAL_HASHEx_SHA224_Finish(&ctx->hhash_sha256, output, 10) != 0) {
            return; // Return error code here
        }
    }
    if (st_sha256_save_hw_context(ctx) != 1) {
        return; // return HASH_BUSY timeout Error here
    }
}

#endif /*MBEDTLS_SHA256_ALT*/