E3 Designers / Mbed OS mbed_escm2000

demo new haven display

Dependencies:   LCD Menu ButtonCtrl TimeManagement EventLog AddressMap emic2

ESCM 2000 Control and Display application provides interface for the LPC1768 processor boards with the ECSM 2000 system.

This application implements SW interface : - RX 485 Receive from physical system - RX 485 Interface to send toECOM / ESCM board - CAN Interface to send to ECOM / ESCM board - 4x40 LCD with menu controls - RTC configuration -EMIC2 Sound Card - GPIO Extender to push buttons etc

main.cpp

Committer:
foxbrianr
Date:
2019-06-16
Revision:
0:91f25a0f819c
Child:
1:a16e53a9e991

File content as of revision 0:91f25a0f819c:

#include "mbed.h"
#include "LCD.h"


Serial pc(USBTX, USBRX); // tx, rx

LCD   MyLCD;

int main() {
        
    pc.printf("\n\r");
    pc.printf("=====================================\n\r");
    pc.printf("= LCD TEST                          =\n\r");
    pc.printf("=====================================\n\r");

    MyLCD.init();
    MyLCD.display("Initializing System...");
    
    //MyLCD.locate(1,1);
    //MyLCD.write("Initializing System...");
    
    pc.printf("=====================================\n\r");
    pc.printf("= Launch                            =\n\r");
    pc.printf("=====================================\n\r");
    //myLcd.clear(1,1);
    //MyLCD.writeCharacters("ABCDEFGHIJKLMNOPQRSTUVWXYZ..............",0,0);
    //MyLCD.writeCharacters("----------------------------------------",1,0);
    //MyLCD.writeCharacters("abcdefghijklmnopqrstuvwxyz!!!!!!!!!!!!!!",2,0);
    //MyLCD.writeCharacters("0123456789012345678901234567890123456789",3,0);
    
    
    MyLCD.writeCommand((char)0x80,1,0); //address 0 position (=0,=0)
    MyLCD.writeData   ((char)0x55,1,0); //x
    
    int i=0;
    while(1) {
        wait_ms(10);
        MyLCD.writeCommand(0x80,1,0); //Turn on display; no cursor 
        MyLCD.writeData   (0x55,1,0); //Turn on display; no cursor 
        //MyLCD.locate(0,1);
        //MyLCD.writeCharacter('X',0,i++);
        //if(i>MyLCD.columns())
        //    i=i;
    }
}