Diff: MFRC522.h

Revision:

5:df18de5caf9f

Parent:

3:654723104cc9

--- a/MFRC522.h	Fri Jun 22 09:59:36 2018 +0000
+++ b/MFRC522.h	Fri May 03 11:14:06 2019 +0000
@@ -76,77 +76,6 @@
 
 #include "mbed.h"
 
-/**
-* MFRC522 example
-*
-* @code
-* #include "mbed.h"
-* #include "MFRC522.h"
-*
-* //KL25Z Pins for MFRC522 SPI interface
-* #define SPI_MOSI    PTC6
-* #define SPI_MISO    PTC7
-* #define SPI_SCLK    PTC5
-* #define SPI_CS      PTC4
-* // KL25Z Pin for MFRC522 reset
-* #define MF_RESET    PTC3
-* // KL25Z Pins for Debug UART port
-* #define UART_RX     PTA1
-* #define UART_TX     PTA2
-*
-* DigitalOut LedRed   (LED_RED);
-* DigitalOut LedGreen (LED_GREEN);
-*
-* Serial     DebugUART(UART_TX, UART_RX);
-* MFRC522    RfChip   (SPI_MOSI, SPI_MISO, SPI_SCLK, SPI_CS, MF_RESET);
-*
-* int main(void) {
-*   // Set debug UART speed
-*   DebugUART.baud(115200);
-*
-*   // Init. RC522 Chip
-*   RfChip.PCD_Init();
-*
-*   while (true) {
-*     LedRed   = 1;
-*     LedGreen = 1;
-*
-*     // Look for new cards
-*     if ( ! RfChip.PICC_IsNewCardPresent())
-*     {
-*       wait_ms(500);
-*       continue;
-*     }
-*
-*     LedRed   = 0;
-*
-*     // Select one of the cards
-*     if ( ! RfChip.PICC_ReadCardSerial())
-*     {
-*       wait_ms(500);
-*       continue;
-*     }
-*
-*     LedRed   = 1;
-*     LedGreen = 0;
-*
-*     // Print Card UID
-*     printf("Card UID: ");
-*     for (uint8_t i = 0; i < RfChip.uid.size; i++)
-*     {
-*       printf(" %X02", RfChip.uid.uidByte[i]);
-*     }
-*     printf("\n\r");
-*
-*     // Print Card type
-*     uint8_t piccType = RfChip.PICC_GetType(RfChip.uid.sak);
-*     printf("PICC Type: %s \n\r", RfChip.PICC_GetTypeName(piccType));
-*     wait_ms(1000);
-*   }
-* }
-* @endcode
-*/
-
 class MFRC522 {
 public:
 
@@ -343,7 +272,7 @@
   // ************************************************************************************
   //@{
 
-    
+    /* Reset managers */
    void PCD_Reset_On (void);
    
    void PCD_Reset_Off (void);