Library to easily communicate with XBee modules.

Dependencies:   DigiLogger

Dependents:   WaterLogger XbeeGateway XBee_Cooker ProjetReceiver ... more

Use XBee radio modules to easily improve your project with wireless connectivity. You can enable entire networks of connected devices. XBees can exchange data with other modules in the network and configure remote modules as well as trigger actions or collect sensor data on XBee nodes without needing additional external microcontrollers. Using this documentation and configuration tools with XBee modules, it is easy to develop these types of applications and more.

/media/uploads/spastor/xbee-xbeepro-series1.jpg

The XBee mbed Library is a ready-to-import mbed extension that dramatically reduces development time for XBee projects on the mbed platforms. There are many modular examples, making it an easy and smooth process to add wireless networking to a whole range of useful applications.

Info

Currently 802.15.4 (Series 1 and 2), ZigBee (Series 2) and DigiMesh (Series 1 and 2) modules are supported. The libraries can be extended to support other protocols like DigiMesh point-to-point, WiFi, etc.

User manual

The user manual can be found at this project's Wiki pages:

  1. Configuring the library
  2. Debugging the library
  3. Initializing modules
  4. Resetting the local module
  5. Receiving Data from other module
  6. Sending data to another module
  7. Discovering nodes in the network
  8. Configuring local and remote modules
  9. Handling modem status changes
  10. Handling remote modules DIOs, ADCs and PWMs
  11. Handling IO Data Samples from other module
  12. Radio Power Management

Ready to use examples

There are a lot of ready to use examples to get started quickly.
Make sure you have a valid example setup before running the examples:

Examples for ZigBee modules

Import programXBeeZB_Receive_Data

ZigBee Receive Data example for mbed XBeeLib By Digi

Import programXBeeZB_Send_Data

ZigBee Send Data example for mbed XBeeLib By Digi

Import programXBeeZB_module_config

ZigBee network configuration example for mbed XBeeLib By Digi

Import programXBeeZB_AT_Commands

ZigBee AT Commands example for mbed XBeeLib By Digi

Import programXBeeZB_dio_adc

ZigBee DIOs and ADCs example for mbed XBeeLib By Digi

Import programXBeeZB_IO_Sample_Callback

ZigBee IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBeeZB_modem_status

ZigBee Modem Status example for mbed XBeeLib By Digi

Import programXBeeZB_node_discovery

ZigBee Node Discovery example for mbed XBeeLib By Digi

Import programXBeeZB_power_mngmnt_cyclic_sleep

ZigBee Power Management using Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBeeZB_power_mngmnt_pin_sleep

ZigBee Power Management using Pin Sleep example for mbed XBeeLib By Digi

Examples for 802.15.4 modules

Import programXBee802_Receive_Data

802.15.4 Receive Data example for mbed XBeeLib By Digi

Import programXBee802_Send_Data

802.15.4 Send Data example for mbed XBeeLib By Digi

Import programXBee802_module_config

802.15.4 network configuration example for mbed XBeeLib By Digi

Import programXBee802_AT_Commands

802.15.4 AT Commands example for mbed XBeeLib By Digi

Import programXBee802_dio_adc_pwm

802.15.4 DIOs, ADCs and PWM example for mbed XBeeLib By Digi

Import programXBee802_IO_Sample_Callback

802.15.4 IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBee802_node_discovery

802.15.4 Node Discovery example for mbed XBeeLib By Digi

Import programXBee802_power_mngmnt_cyclic_sleep

802.15.4 Power Management using Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBee802_power_mngmnt_pin_sleep

802.15.4 Power Management using Pin Sleep example for mbed XBeeLib By Digi

Examples for DigiMesh modules

Import programXBeeDM_Receive_Data

DigiMesh Receive Data example for mbed XBeeLib By Digi

Import programXBeeDM_Send_Data

DigiMesh Send Data example for mbed XBeeLib By Digi

Import programXBeeDM_module_config

DigiMesh network configuration example for mbed XBeeLib By Digi

Import programXBeeDM_AT_Commands

DigiMesh AT Commands example for mbed XBeeLib By Digi

Import programXBeeDM_dio_adc_pwm

DigiMEsh DIOs, ADCs and PWMs example for mbed XBeeLib By Digi

Import programXBeeDM_IO_Sample_Callback

DigiMesh IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBeeDM_modem_status

DigiMesh Modem Status example for mbed XBeeLib By Digi

Import programXBeeDM_node_discovery

DigiMesh Node Discovery example for mbed XBeeLib By Digi

Import programXBeeDM_power_mngmnt_asyncr_cyclic_sleep

DigiMesh Power Management using Asynchronous Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBeeDM_power_mngmnt_pin_sleep

DigiMesh Power Management using Pin Sleep example for mbed XBeeLib By Digi

Files at this revision

API Documentation at this revision

Comitter:
hbujanda
Date:
Fri Jul 29 13:10:07 2016 +0200
Parent:
8:b5f4a0e92249
Commit message:
Automatic upload

Changed in this revision

DigiLogger.lib Show annotated file Show diff for this revision Revisions of this file
XBee802/XBee802.cpp Show annotated file Show diff for this revision Revisions of this file
XBee802/XBee802.h Show annotated file Show diff for this revision Revisions of this file
XBeeDM/XBeeDM.cpp Show annotated file Show diff for this revision Revisions of this file
XBeeDM/XBeeDM.h Show annotated file Show diff for this revision Revisions of this file
XBeeLib.h Show annotated file Show diff for this revision Revisions of this file
XBeeZB/XBeeZB.cpp Show annotated file Show diff for this revision Revisions of this file
XBeeZB/XBeeZB.h Show annotated file Show diff for this revision Revisions of this file
diff -r b5f4a0e92249 -r 780db84ce891 DigiLogger.lib
--- a/DigiLogger.lib	Fri Jul 29 12:10:38 2016 +0200
+++ b/DigiLogger.lib	Fri Jul 29 13:10:07 2016 +0200
@@ -1,1 +1,1 @@
-http://developer.mbed.org/teams/Digi-International-Inc/code/DigiLogger/#58c5158b5120
+http://developer.mbed.org/teams/Digi-International-Inc/code/DigiLogger/#
diff -r b5f4a0e92249 -r 780db84ce891 XBee802/XBee802.cpp
--- a/XBee802/XBee802.cpp	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBee802/XBee802.cpp	Fri Jul 29 13:10:07 2016 +0200
@@ -137,17 +137,6 @@
     return Success;
 }
 
-RadioStatus XBee802::set_tc_link_key(const uint8_t * const key, const uint16_t length)
-{
-    if (key == NULL || length == 0 || length > 16) {
-        return Failure;
-    }
-    AtCmdFrame::AtCmdResp cmdresp;
-
-    cmdresp = set_param("KY", key, length);
-    return cmdresp == AtCmdFrame::AtCmdRespOk ? Success : Failure;
-}
-
 RadioStatus XBee802::get_node_discovery_timeout(uint16_t * const timeout_ms)
 {
     AtCmdFrame::AtCmdResp cmdresp;
diff -r b5f4a0e92249 -r 780db84ce891 XBee802/XBee802.h
--- a/XBee802/XBee802.h	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBee802/XBee802.h	Fri Jul 29 13:10:07 2016 +0200
@@ -141,16 +141,6 @@
          */
         RadioStatus set_network_address(uint16_t addr);
 
-        /** set_tc_link_key - Sets key used for encryption and decryption (ZigBee trust center link key).
-         *  It is not recommended to set the key programmatically, because it could be read through the raw serial port bits.
-         *  @param key pointer to the 128-bit AES key
-         *  @param length size of the buffer pointed by 'key'
-         *  @returns
-         *     Success if the operation was successful,
-         *     Failure otherwise
-         */
-        RadioStatus set_tc_link_key(const uint8_t * const key, const uint16_t length);
-
         /** register_node_discovery_cb - registers the callback function that will be called
          * when the responses to the node discovery command arrive
          *
diff -r b5f4a0e92249 -r 780db84ce891 XBeeDM/XBeeDM.cpp
--- a/XBeeDM/XBeeDM.cpp	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBeeDM/XBeeDM.cpp	Fri Jul 29 13:10:07 2016 +0200
@@ -102,17 +102,6 @@
     return Success;
 }
 
-RadioStatus XBeeDM::set_tc_link_key(const uint8_t * const key, const uint16_t length)
-{
-    if (key == NULL || length == 0 || length > 16) {
-        return Failure;
-    }
-    AtCmdFrame::AtCmdResp cmdresp;
-
-    cmdresp = set_param("KY", key, length);
-    return cmdresp == AtCmdFrame::AtCmdRespOk ? Success : Failure;
-}
-
 RadioStatus XBeeDM::get_node_discovery_timeout(uint16_t * const timeout_ms)
 {
     AtCmdFrame::AtCmdResp cmdresp;
diff -r b5f4a0e92249 -r 780db84ce891 XBeeDM/XBeeDM.h
--- a/XBeeDM/XBeeDM.h	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBeeDM/XBeeDM.h	Fri Jul 29 13:10:07 2016 +0200
@@ -104,16 +104,6 @@
          */
         RadioStatus get_network_id(uint16_t * const network_id);
 
-        /** set_tc_link_key - Sets key used for encryption and decryption (ZigBee trust center link key).
-         *  It is not recommended to set the key programmatically, because it could be read through the raw serial port bits.
-         *  @param key pointer to the 128-bit AES key
-         *  @param length size of the buffer pointed by 'key'
-         *  @returns
-         *     Success if the operation was successful,
-         *     Failure otherwise
-         */
-        RadioStatus set_tc_link_key(const uint8_t * const key, const uint16_t length);
-
         /** register_node_discovery_cb - registers the callback function that will be called
          * when the responses to the node discovery command arrive
          *
diff -r b5f4a0e92249 -r 780db84ce891 XBeeLib.h
--- a/XBeeLib.h	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBeeLib.h	Fri Jul 29 13:10:07 2016 +0200
@@ -16,7 +16,7 @@
 #ifndef __XBEE_H_
 #define __XBEE_H_
 
-#define XB_LIBRARY_VERSION          0x01010100U
+#define XB_LIBRARY_VERSION          0x01010200U
 #define XB_MAJOR_VERSION            ((XB_LIBRARY_VERSION >> 24) & 0xFFU)
 #define XB_MINOR_VERSION            ((XB_LIBRARY_VERSION >> 16) & 0xFFU)
 #define XB_PATCH_LEVEL              ((XB_LIBRARY_VERSION >> 8) & 0xFFU)
diff -r b5f4a0e92249 -r 780db84ce891 XBeeZB/XBeeZB.cpp
--- a/XBeeZB/XBeeZB.cpp	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBeeZB/XBeeZB.cpp	Fri Jul 29 13:10:07 2016 +0200
@@ -261,17 +261,6 @@
     return cmdresp == AtCmdFrame::AtCmdRespOk ? Success : Failure;
 }
 
-RadioStatus XBeeZB::set_tc_link_key(const uint8_t * const key, const uint16_t length)
-{
-    if (key == NULL || length == 0 || length > 16) {
-        return Failure;
-    }
-    AtCmdFrame::AtCmdResp cmdresp;
-
-    cmdresp = set_param("KY", key, length);
-    return cmdresp == AtCmdFrame::AtCmdRespOk ? Success : Failure;
-}
-
 void XBeeZB::radio_status_update(AtCmdFrame::ModemStatus modem_status)
 {
     /* Update the radio status variables */
diff -r b5f4a0e92249 -r 780db84ce891 XBeeZB/XBeeZB.h
--- a/XBeeZB/XBeeZB.h	Fri Jul 29 12:10:38 2016 +0200
+++ b/XBeeZB/XBeeZB.h	Fri Jul 29 13:10:07 2016 +0200
@@ -211,16 +211,6 @@
          */
         RadioStatus set_encryption_options(const uint8_t options);
 
-        /** set_tc_link_key - Sets key used for encryption and decryption (ZigBee trust center link key).
-         *  It is not recommended to set the key programmatically, because it could be read through the raw serial port bits.
-         *  @param key pointer to the 128-bit AES key
-         *  @param length size of the buffer pointed by 'key'
-         *  @returns
-         *     Success if the operation was successful,
-         *     Failure otherwise
-         */
-        RadioStatus set_tc_link_key(const uint8_t * const key, const uint16_t length);
-
         /** register_node_discovery_cb - registers the callback function that will be called
          * when the responses to the node discovery command arrive
          *