Digi International Inc. / Mbed 2 deprecated XBeeDM_Send_Data

DigiMesh Send Data example for mbed XBeeLib By Digi

Dependencies:   XBeeLib mbed

Fork of XBeeZB_Send_Data by Digi International Inc.

Description

This example shows how to send data to a remote XBeeDM module. The application creates a message for a remote XBee module. This library encodes and sends it to the local XBee module through the serial port. Then the local XBee module sends the packet to the remote XBee module through the air.

The example shows how to send both unicast and broadcast messages.

See Sending data to another module chapter for more information.

Common Setup

Make sure you have a valid Example Common Setup

Example Setup

Application

Broadcast messages doesn't require any configuration, but for unicast messages to a specific node you have to configure the remote device 64-bit address by customizing the REMOTE_NODE_ADDR64_MSB and REMOTE_NODE_ADDR64_LSB defines with the remote XBee module 64-bit address.

Running the example

Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter. The application will first send a broadcast message and finally a couple of unicast messages to the configured remote XBee module.

Verify that the remote XBee module is receiving the frames by accessing the "Console" tab of the X-CTU. You should see there the broadcast and unicast messages.

Files at this revision

API Documentation at this revision

Revision 11:7e9486204a86, committed 2016-07-29

Comitter:
hbujanda
Date:
Fri Jul 29 12:15:07 2016 +0200
Parent:
10:0d9953619462
Commit message:
Automatic upload

Changed in this revision

XBeeLib.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file 
diff -r 0d9953619462 -r 7e9486204a86 XBeeLib.lib
--- a/XBeeLib.lib	Thu Jul 28 10:18:39 2016 +0000
+++ b/XBeeLib.lib	Fri Jul 29 12:15:07 2016 +0200
@@ -1,1 +1,1 @@
-http://developer.mbed.org/teams/Digi-International-Inc/code/XBeeLib/#06522f3a6642
+http://developer.mbed.org/teams/Digi-International-Inc/code/XBeeLib/#b5f4a0e92249

diff -r 0d9953619462 -r 7e9486204a86 main.cpp
--- a/main.cpp	Thu Jul 28 10:18:39 2016 +0000
+++ b/main.cpp	Fri Jul 29 12:15:07 2016 +0200
@@ -19,8 +19,8 @@
 
 #define REMOTE_NODE_ADDR64_MSB  ((uint32_t)0x0013A200)
 
-//#error "Replace next define with the LSB of the remote module's 64-bit address (SL parameter)"
-#define REMOTE_NODE_ADDR64_LSB  ((uint32_t)0x40E465E0)
+#error "Replace next define with the LSB of the remote module's 64-bit address (SL parameter)"
+#define REMOTE_NODE_ADDR64_LSB  ((uint32_t)0x01234567)
 
 #define REMOTE_NODE_ADDR64      UINT64(REMOTE_NODE_ADDR64_MSB, REMOTE_NODE_ADDR64_LSB)
 

diff -r 0d9953619462 -r 7e9486204a86 mbed.bld
--- a/mbed.bld	Thu Jul 28 10:18:39 2016 +0000
+++ b/mbed.bld	Fri Jul 29 12:15:07 2016 +0200
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/f9eeca106725
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/487b796308b0
\ No newline at end of file