Digi International Inc. / Mbed 2 deprecated XBee802_AT_Commands

802.15.4 AT Commands example for mbed XBeeLib By Digi

Dependencies:   XBeeLib mbed

This example shows how to read and change configuration parameters of either the local XBee module or a remote XBee module.

See Configuring local and remote modules chapter for more information.

Common Setup

Make sure you have a valid Example Common Setup

Example Setup

Application

You have to configure:

  • The remote device 64-bit address by customizing the REMOTE_NODE_ADDR64_MSB and REMOTE_NODE_ADDR64_LSB defines with the remote XBee module 64-bit address.
  • The remote device 16-bit address by customizing the REMOTE_NODE_ADDR16 define with the remote XBee module 16-bit address.

Running the example

Build and deploy the example to the mbed module.
Reset the mbed module so the example starts. You should see the example debug information through the debug interface configured in the 'Local Setup' chapter.
The application will do following operations:

OperationXBee moduleparameterVerification
ReadlocalSLThe result is asserted against the known local module SL value. So just check the assertion passed
SetlocalNIClick 'discover remote devices' on the X-CTU connected to the remote. Should discover the local XBee module with the new NI (ni_example_local)
ReadremoteSLThe result is asserted against the known remote module SL value. So just check the assertion passed. This test is done using both 64-bit and 16-bit addressing for demonstration
SetremoteNIRefresh the 'NI' parameter in the X-CTU connected to the remote and check it has changed to the new NI (ni_example_remote)

config.h@7:34f972faa657, 2015-05-18 (annotated)

Committer:
spastor
Date:
Mon May 18 13:17:07 2015 +0200
Revision:
7:34f972faa657
Parent:
6:193fc0aec946
Child:
8:7b4771c9689c
Automatic upload

Who changed what in which revision?

UserRevisionLine numberNew contents of line
spastor 7:34f972faa657 1 /**
spastor 7:34f972faa657 2 * Copyright (c) 2015 Digi International Inc.,
spastor 7:34f972faa657 3 * All rights not expressly granted are reserved.
spastor 7:34f972faa657 4 *
spastor 7:34f972faa657 5 * This Source Code Form is subject to the terms of the Mozilla Public
spastor 7:34f972faa657 6 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
spastor 7:34f972faa657 7 * You can obtain one at http://mozilla.org/MPL/2.0/.
spastor 7:34f972faa657 8 *
spastor 7:34f972faa657 9 * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
spastor 7:34f972faa657 10 * =======================================================================
spastor 7:34f972faa657 11 */
hbujanda 6:193fc0aec946 12
spastor 7:34f972faa657 13 #ifndef __CONFIG_H_
hbujanda 6:193fc0aec946 14 #define __CONFIG_H_
hbujanda 6:193fc0aec946 15
hbujanda 6:193fc0aec946 16 /** Library configuration options */
hbujanda 6:193fc0aec946 17 #define ENABLE_LOGGING
hbujanda 6:193fc0aec946 18 #define ENABLE_ASSERTIONS
hbujanda 6:193fc0aec946 19 #define FRAME_BUFFER_SIZE 4
hbujanda 6:193fc0aec946 20 #define MAX_FRAME_PAYLOAD_LEN 128
hbujanda 6:193fc0aec946 21 #define ENABLE_PM_SUPPORT
hbujanda 6:193fc0aec946 22
hbujanda 6:193fc0aec946 23 #define SYNC_OPS_TIMEOUT_MS 2000
hbujanda 6:193fc0aec946 24
hbujanda 6:193fc0aec946 25 //#define RADIO_TX NC /* TODO: specify your setup's Serial TX pin connected to the XBee module DIN pin */
hbujanda 6:193fc0aec946 26 //#define RADIO_RX NC /* TODO: specify your setup's Serial RX pin connected to the XBee module DOUT pin */
hbujanda 6:193fc0aec946 27 //#define RADIO_RTS NC /* TODO: specify your setup's Serial RTS# pin connected to the XBee module RTS# pin */
hbujanda 6:193fc0aec946 28 //#define RADIO_CTS NC /* TODO: specify your setup's Serial CTS# pin connected to the XBee module CTS# pin */
hbujanda 6:193fc0aec946 29 //#define RADIO_RESET NC /* TODO: specify your setup's GPIO (output) connected to the XBee module's reset pin */
hbujanda 6:193fc0aec946 30 //#define RADIO_SLEEP_REQ NC /* TODO: specify your setup's GPIO (output) connected to the XBee module's SLEEP_RQ pin */
hbujanda 6:193fc0aec946 31 //#define RADIO_ON_SLEEP NC /* TODO: specify your setup's GPIO (input) connected to the XBee module's ON_SLEEP pin */
hbujanda 6:193fc0aec946 32 //#define DEBUG_TX NC /* TODO: specify your setup's Serial TX for debugging */
hbujanda 6:193fc0aec946 33 //#define DEBUG_RX NC /* TODO: specify your setup's Serial RX for debugging (optional) */
hbujanda 6:193fc0aec946 34
hbujanda 6:193fc0aec946 35 #if !defined(RADIO_TX)
hbujanda 6:193fc0aec946 36 #error "Please define RADIO_TX pin"
hbujanda 6:193fc0aec946 37 #endif
hbujanda 6:193fc0aec946 38
hbujanda 6:193fc0aec946 39 #if !defined(RADIO_RX)
hbujanda 6:193fc0aec946 40 #error "Please define RADIO_RX pin"
hbujanda 6:193fc0aec946 41 #endif
hbujanda 6:193fc0aec946 42
hbujanda 6:193fc0aec946 43 #if !defined(RADIO_RESET)
hbujanda 6:193fc0aec946 44 #define RADIO_RESET NC
hbujanda 6:193fc0aec946 45 #warning "RADIO_RESET not defined, defaulted to 'NC'"
hbujanda 6:193fc0aec946 46 #endif
hbujanda 6:193fc0aec946 47
hbujanda 6:193fc0aec946 48 #if defined(ENABLE_LOGGING)
hbujanda 6:193fc0aec946 49 #if !defined(DEBUG_TX)
hbujanda 6:193fc0aec946 50 #error "Please define DEBUG_TX"
hbujanda 6:193fc0aec946 51 #endif
hbujanda 6:193fc0aec946 52 #if !defined(DEBUG_RX)
hbujanda 6:193fc0aec946 53 #define DEBUG_RX NC
hbujanda 6:193fc0aec946 54 #warning "DEBUG_RX not defined, defaulted to 'NC'"
hbujanda 6:193fc0aec946 55 #endif
hbujanda 6:193fc0aec946 56 #endif
hbujanda 6:193fc0aec946 57
hbujanda 6:193fc0aec946 58 #endif /* __CONFIG_H_ */