Delta / Mbed OS Delta_CLI

This CLI (Command Line Interface) is based mbed-os. Both NNN50 and NQ620 are supported.

Fork of NNN40_CLI by Delta

You are viewing an older revision! See the latest version

Homepage

The latest version of pre-compiled hex file can be downloaded here

BLE CLI Document can be downloaded here.

Note that when evaluate using Windows PC as the host, the Serial driver need to be installed in advance. The instruction is explained in the link below

https://developer.mbed.org/handbook/Windows-serial-configuration

Once installed, a device called 'mbed Serial Port (COM#)' should be recognized in Device Manager, as shown below

/media/uploads/tsungta/mbed_serial_port.png

Please open the com port at 115200 8n1 as default

All wikipages