BLE_HTS_Demo
This BLE_HTS_Demo program enables you to collect Temperature and Humidity data reading from sensor and transmit to collector device such as smartphone.
Below documents teach you how to install app that can connect and read data from our DELTA-DFCM-NNN40 development board. There are two versions, Android and iPhone.
/media/uploads/Marcomissyou/ios_app_for_environment_sensor_0518.pdf
/media/uploads/Marcomissyou/android_app_for_environment_sensor.pdf
main.cpp
- Committer:
- Marcomissyou
- Date:
- 2015-06-25
- Revision:
- 5:5f9bc8b53db9
- Parent:
- 3:6a9082a10dc9
- Child:
- 7:c6c5ba871c2d
File content as of revision 5:5f9bc8b53db9:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed.h" #include "BatteryService.h" #include "DeviceInformationService.h" #include "BLE.h" #include "hts221.h" #include "uvis25.h" #include "nrf_gpio.h" #include "nrf51_bitfields.h" BLEDevice ble; DigitalOut led1(LED1); DigitalOut led2(LED2); static const uint8_t UUID_HUMI_AND_UVI[] = {0xf5, 0x59, 0xa2, 0x49, 0xbe, 0xb1, 0x4c, 0x54, 0xa1, 0x0a, 0xc7, 0x95, 0x7e, 0x17, 0xf8, 0x67}; uint8_t wrs_HumiUVI_payload[11] = {0, }; uint8_t htsTempPayload[7] = {0,}; /* Health Thermometer Service */ /* Service: https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.heart_rate.xml */ /* Temperature Measurement: https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.temperature_measurement.xml */ GattCharacteristic htsTemp ( GattCharacteristic::UUID_TEMPERATURE_MEASUREMENT_CHAR, htsTempPayload, 6, 13, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE); GattCharacteristic wrs_HumiUVI ( UUID_HUMI_AND_UVI, wrs_HumiUVI_payload, 1, 7, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE); GattCharacteristic *htsChars[] = {&htsTemp, &wrs_HumiUVI}; GattService htsService ( GattService::UUID_HEALTH_THERMOMETER_SERVICE, htsChars, sizeof(htsChars) / sizeof(GattCharacteristic *)); float tempCelsius = 25.50; int32_t tempCelsius_ix100; int8_t exponent = -2; uint8_t UTC[7] = { 222, 7, 9, 11, 13, 42, 59 }; float humi = 55; int32_t humi_ix100; uint8_t uvi = 8; uint32_t counter = 0; const static char DEVICE_NAME[] = "WRS_d7"; static const uint16_t uuid16_list[] = {GattService::UUID_BATTERY_SERVICE, GattService::UUID_DEVICE_INFORMATION_SERVICE}; static volatile bool triggerSensorPolling = false; /**************************************************************************/ /*! @brief This custom class can be used to override any GattServerEvents that you are interested in handling on an application level. */ /**************************************************************************/ // void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason) { ble.startAdvertising(); } void periodicCallback(void) { led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */ /* Note that the periodicCallback() executes in interrupt context, so it is safer to do * heavy-weight sensor polling from the main thread. */ triggerSensorPolling = true; } /**************************************************************************/ /*! @brief Program entry point */ /**************************************************************************/ int main(void) { nrf_gpio_cfg_output(19); // SWIO nrf_gpio_pin_clear(19); if (hts221_init() & uvis25_init()) { led2=1; } HTS221_Calib(); Ticker ticker; ticker.attach(periodicCallback, 2); ble.init(); ble.onDisconnection(disconnectionCallback); /* Setup auxiliary services. */ BatteryService battery(ble); DeviceInformationService deviceInfo(ble, "Delta", "NNN40_1.0", "SN", "EVB_1.0", "B230-n80-m92", "T_0128b"); /* Setup advertising. */ ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE); ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list)); ble.accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_HEART_RATE_SENSOR); ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME)); ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED); ble.setAdvertisingInterval(1600); ble.startAdvertising(); ble.addService(htsService); while (true) { HTS221_ReadTempHumi(&tempCelsius, &humi); if(uvis25_verify_product_id()){ uvi = UVIS25_ReadUVI(); } else { uvi = 100; //Environment Sensor APP will show NO UV DEVICE. } /* Update the Temperature measurement */ /* See --> https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.temperature_measurement.xml */ tempCelsius_ix100 = tempCelsius * 100; htsTempPayload[0] = 0x02; // flag htsTempPayload[1] = tempCelsius_ix100%0xff; htsTempPayload[2] = tempCelsius_ix100/0xff; htsTempPayload[3] = tempCelsius_ix100/0xffff; htsTempPayload[4] = exponent; for (int i = 0; i < 7; i++) htsTempPayload[i+5] = UTC[i]; ble.updateCharacteristicValue(htsTemp.getValueAttribute().getHandle(), htsTempPayload, 12); ble.waitForEvent(); wait(1); wrs_HumiUVI_payload[0] = 0x03; // flag memcpy(&wrs_HumiUVI_payload[1],&humi,4); wrs_HumiUVI_payload[5] = uvi; ble.updateCharacteristicValue(wrs_HumiUVI.getValueAttribute().getHandle(), wrs_HumiUVI_payload, 6); ble.waitForEvent(); wait(1); } }