![](/media/cache/group/logo.jpg.50x50_q85.jpg)
BLE_HTS_Demo
This BLE_HTS_Demo program enables you to collect Temperature and Humidity data reading from sensor and transmit to collector device such as smartphone.
Below documents teach you how to install app that can connect and read data from our DELTA-DFCM-NNN40 development board. There are two versions, Android and iPhone.
/media/uploads/Marcomissyou/ios_app_for_environment_sensor_0518.pdf
/media/uploads/Marcomissyou/android_app_for_environment_sensor.pdf
hts221.h
- Committer:
- silviaChen
- Date:
- 2017-07-18
- Revision:
- 10:5220f45c8ec1
- Parent:
- 0:ef0f188a6fdd
File content as of revision 10:5220f45c8ec1:
/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved. * * The information contained herein is property of Nordic Semiconductor ASA. * Terms and conditions of usage are described in detail in NORDIC * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. * * Licensees are granted free, non-transferable use of the information. NO * WARRANTY of ANY KIND is provided. This heading must NOT be removed from * the file. * */ #ifndef HTS221_H #define HTS221_H /*lint ++flb "Enter library region" */ #include <stdbool.h> #include <stdint.h> #define ADDRESS_WHO_AM_I (0x0FU) //!< WHO_AM_I register identifies the device. Expected value is 0xBC. #define HTS221_WriteADDE 0xBE #define HTS221_ReadADDE 0xBF #define HTS221_TempHumi_OUT 0x28 #define HTS221_CALIB 0x30 #define MaxTemp 120 #define MinTemp -40 #define MaxHumi 100 #define MinHumi 0 // Humidity and temperature resolution mode, to ocnfigure sample average #define TRes_1 000 // Number of temperature samples take 2^1, TRes_2 take 2^2, and so forth. #define TRes_2 001 #define TRes_3 010 #define TRes_4 011 #define TRes_5 100 #define TRes_6 101 #define TRes_7 102 #define TRes_8 103 #define HRes_2 000 // Number of humidity samples take 2^2, HRes_3 take 2^3, and so forth. #define HRes_3 001 #define HRes_4 010 #define HRes_5 011 #define HRes_6 100 #define HRes_7 101 #define HRes_8 102 #define HRes_9 103 // Control register 1 #define PD_On 0x80 // Power down mode #define PD_Off 0x00 // Active mode #define BDU_On 0x04 // Block data update, this feature prevents the reading of LSB and MSB related to different samples. #define BDU_Off 0x00 // Define output data rate #define ODR_OneShot 0x00 #define ODR_1Hz 0x01 #define ODR_7Hz 0x02 #define ODR_12_5Hz 0x03 // Control register 2 #define Boot 0x80 #define NoBoot 0x00 #define HeaterOn 0x02 #define HeaterOff 0x00 #define New_OS 0x01 // One shot, a single acquisition of temperature and humidity is started #define No_OS 0x00 // Control register 3 #define DRDY_H 0x00 // Data Ready output signal active high(default) #define DRDY_L 0x80 // Data Ready output signal active low #define PP_OD_PP 0x00 // Push-pull on PIN3(DRDY)(default) #define PP_OD_OD 0x40 // Open Drain on PIN3(DRDY) #define DRDY_EN 0x04 // Data Ready enable #define DRDY_NON 0x00 // Data Ready disable(default) // Status register #define H_DA_On 0x02 // Humidity data avialable, set to 1 whenever a new humidity sample is available. #define H_DA_Off 0x00 #define T_DA_On 0x01 // Temperature data avialable, set to 1 whenever a new humidity sample is available. #define T_DA_Off 0x00 bool hts221_init(void); void hts221_register_write(uint8_t register_address, const uint8_t value); void hts221_register_read(char register_address, char *destination, uint8_t number_of_bytes); bool hts221_verify_product_id(void); void HTS221_Calib(void); void HTS221_ReadTempHumi( float *pTemp , float *pHumi); float linear_interpolation(int16_t x0, float y0, int16_t x1, float y1, float mes); #endif /* HTS221_H */