Diff: mbed-dev/targets/TARGET_ublox/TARGET_HI2110/pinmap.c

Revision:

18:6a4db94011d3

diff -r f713758f6238 -r 6a4db94011d3 mbed-dev/targets/TARGET_ublox/TARGET_HI2110/pinmap.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev/targets/TARGET_ublox/TARGET_HI2110/pinmap.c	Sun May 14 23:18:57 2017 +0000
@@ -0,0 +1,145 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 u-blox
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/* As well as claiming and setting pins, the functions here also need
+ * to take into account the way the pins are powered.  On the Boudica
+ * chip they are arranged in three banks, PIO 0:5, PIO 6:10 and
+ * PIO 11:19.
+ *
+ * The arrangement for which PIO bank is powered is determined by the module
+ * in which the HI2110 chip is mounted, hence the use of conditional
+ * compilation below.
+ */
+
+#include "stdbool.h"
+#include "mbed_assert.h"
+#include "mbed_error.h"
+#include "pinmap.h"
+
+/* ----------------------------------------------------------------
+ * MACROS
+ * ----------------------------------------------------------------*/
+
+#define HAL_PIO_MASK_FUNC (0xFF)
+#define HAL_PIO_MODULO_4_MASK (0x3)
+
+/* ----------------------------------------------------------------
+ * GLOBAL VARIABLES
+ * ----------------------------------------------------------------*/
+
+/* ----------------------------------------------------------------
+ * FUNCTION PROTOTYPES
+ * ----------------------------------------------------------------*/
+
+static inline uint32_t clr_mask (PinName pin);
+static inline uint32_t set_mask (PinName pin, int function);
+static inline volatile uint32_t * func_reg (PinName pin);
+
+/* ----------------------------------------------------------------
+ * NON-API FUNCTIONS
+ * ----------------------------------------------------------------*/
+
+// Return the clear mask for a pin
+static inline uint32_t clr_mask (PinName pin)
+{
+    return HAL_PIO_MASK_FUNC << ((pin & HAL_PIO_MODULO_4_MASK) << 3);
+}
+
+// Return the set mask for a pin and a given function
+static inline uint32_t set_mask (PinName pin, int function)
+{
+    return function << ((pin & HAL_PIO_MODULO_4_MASK) << 3);
+}
+
+// Return the function register for a pin
+static inline volatile uint32_t * func_reg (PinName pin)
+{
+    return &PIO_FUNC0 + (pin >> 2);
+}
+
+// Return the owner of a pin
+// 0: None
+// 1: security core
+// 2: protocol core
+// 3: apps core
+static inline uint8_t get_owner(PinName pin)
+{
+    uint8_t pio_owner_shift = (pin & 0x0F) << 1;
+    volatile uint32_t * pio_owner_reg = (&PIO_OWNER0 + (pin >> 4));
+
+    return 0x03 & (*pio_owner_reg >> pio_owner_shift);
+}
+
+/* ----------------------------------------------------------------
+ * MBED "INTERNAL" API CALLS
+ * ----------------------------------------------------------------*/
+
+void pin_function(PinName pin, int function)
+{
+    volatile uint32_t *pio_func_reg;
+
+    /* Set the function for the given pin */
+    pio_func_reg = func_reg (pin);
+    *pio_func_reg = (*pio_func_reg & ~(clr_mask(pin))) | set_mask(pin, function);
+
+    /* Power the pin */
+#ifdef TARGET_SARA_NBIOT
+    /* On Sara NBIoT, GPIO pin 19 has to be high to power GPIO pins 0 to 10 */
+    if ((pin >= p0) && (pin <= p10)) {
+        /* Grab pin 19 as a GPIO if we don't have it already */
+        if (get_owner(p19) != 0x03) {
+            pio_func_reg = func_reg (p19);
+            *pio_func_reg = (*pio_func_reg & ~(clr_mask(p19))) | set_mask(p19, 1); /* 1 == PIN_FUNCTION_GPIO */
+
+            MBED_ASSERT (get_owner(p19) == 0x03);
+        }
+
+        /* Set pin 19 to be an output and to be high */
+        GPIO_DIR |= (1ul << p19);
+        GPIO_OUT_BITSET = (1ul << p19);
+
+        /* Note: the level on pins 6 to 10 is controlled by the protocol
+         * processor to be the VCC level required by the SIM.  The
+         * application has no control over this. */
+    }
+    /* The power to GPIOs 11 to 19 is fed directly from pin 51 of the module */
+#endif
+}
+
+void pin_mode(PinName pin, PinMode mode)
+{
+    MBED_ASSERT(pin != (PinName)NC);
+
+    switch (mode) {
+        case PullUp:
+        {
+            MBED_ASSERT(false);  /* Not currently supported on HI2100 */
+        }
+        break;
+        case PullDown:
+        {
+            GPIO_PULLEN_BITSET = 1U << pin;
+        }
+        break;
+        case PullNone:
+        {
+            GPIO_PULLEN_BITCLR = 1U << pin;
+        }
+        break;
+        default:
+        break;
+    }
+}