Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFR32MG1/device/system_efr32mg1p.c
- Revision:
- 18:6a4db94011d3
diff -r f713758f6238 -r 6a4db94011d3 mbed-dev/targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFR32MG1/device/system_efr32mg1p.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_Silicon_Labs/TARGET_EFM32/TARGET_EFR32MG1/device/system_efr32mg1p.c Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,384 @@ +/***************************************************************************//** + * @file system_efr32mg1p.c + * @brief CMSIS Cortex-M3/M4 System Layer for EFR32 devices. + * @version 5.1.2 + ****************************************************************************** + * @section License + * <b>Copyright 2017 Silicon Laboratories, Inc. http://www.silabs.com</b> + ****************************************************************************** + * + * Permission is granted to anyone to use this software for any purpose, + * including commercial applications, and to alter it and redistribute it + * freely, subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you must not + * claim that you wrote the original software.@n + * 2. Altered source versions must be plainly marked as such, and must not be + * misrepresented as being the original software.@n + * 3. This notice may not be removed or altered from any source distribution. + * + * DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Silicon Laboratories, Inc. + * has no obligation to support this Software. Silicon Laboratories, Inc. is + * providing the Software "AS IS", with no express or implied warranties of any + * kind, including, but not limited to, any implied warranties of + * merchantability or fitness for any particular purpose or warranties against + * infringement of any proprietary rights of a third party. + * + * Silicon Laboratories, Inc. will not be liable for any consequential, + * incidental, or special damages, or any other relief, or for any claim by + * any third party, arising from your use of this Software. + * + *****************************************************************************/ + +#include <stdint.h> +#include "em_device.h" + +/******************************************************************************* + ****************************** DEFINES ************************************ + ******************************************************************************/ + +/** LFRCO frequency, tuned to below frequency during manufacturing. */ +#define EFR32_LFRCO_FREQ (32768UL) +#define EFR32_ULFRCO_FREQ (1000UL) + +/******************************************************************************* + ************************** LOCAL VARIABLES ******************************** + ******************************************************************************/ + +/* System oscillator frequencies. These frequencies are normally constant */ +/* for a target, but they are made configurable in order to allow run-time */ +/* handling of different boards. The crystal oscillator clocks can be set */ +/* compile time to a non-default value by defining respective EFR_nFXO_FREQ */ +/* values according to board design. By defining the EFR_nFXO_FREQ to 0, */ +/* one indicates that the oscillator is not present, in order to save some */ +/* SW footprint. */ + +#ifndef EFR32_HFRCO_MAX_FREQ +#define EFR32_HFRCO_MAX_FREQ (38000000UL) +#endif + +#ifndef EFR32_HFXO_FREQ +#define EFR32_HFXO_FREQ (38400000UL) +#endif + +#ifndef EFR32_HFRCO_STARTUP_FREQ +#define EFR32_HFRCO_STARTUP_FREQ (19000000UL) +#endif + + +/* Do not define variable if HF crystal oscillator not present */ +#if (EFR32_HFXO_FREQ > 0UL) +/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */ +/** System HFXO clock. */ +static uint32_t SystemHFXOClock = EFR32_HFXO_FREQ; +/** @endcond (DO_NOT_INCLUDE_WITH_DOXYGEN) */ +#endif + +#ifndef EFR32_LFXO_FREQ +#define EFR32_LFXO_FREQ (EFR32_LFRCO_FREQ) +#endif +/* Do not define variable if LF crystal oscillator not present */ +#if (EFR32_LFXO_FREQ > 0UL) +/** @cond DO_NOT_INCLUDE_WITH_DOXYGEN */ +/** System LFXO clock. */ +static uint32_t SystemLFXOClock = 32768UL; +/** @endcond (DO_NOT_INCLUDE_WITH_DOXYGEN) */ +#endif + + +/******************************************************************************* + ************************** GLOBAL VARIABLES ******************************* + ******************************************************************************/ + +/** + * @brief + * System System Clock Frequency (Core Clock). + * + * @details + * Required CMSIS global variable that must be kept up-to-date. + */ +uint32_t SystemCoreClock; + + +/** + * @brief + * System HFRCO frequency + * + * @note + * This is an EFR32 proprietary variable, not part of the CMSIS definition. + * + * @details + * Frequency of the system HFRCO oscillator + */ +uint32_t SystemHfrcoFreq = EFR32_HFRCO_STARTUP_FREQ; + + +/******************************************************************************* + ************************** GLOBAL FUNCTIONS ******************************* + ******************************************************************************/ + +/***************************************************************************//** + * @brief + * Get the current core clock frequency. + * + * @details + * Calculate and get the current core clock frequency based on the current + * configuration. Assuming that the SystemCoreClock global variable is + * maintained, the core clock frequency is stored in that variable as well. + * This function will however calculate the core clock based on actual HW + * configuration. It will also update the SystemCoreClock global variable. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * The current core clock frequency in Hz. + ******************************************************************************/ +uint32_t SystemCoreClockGet(void) +{ + uint32_t ret; + uint32_t presc; + + ret = SystemHFClockGet(); + presc = (CMU->HFCOREPRESC & _CMU_HFCOREPRESC_PRESC_MASK) >> + _CMU_HFCOREPRESC_PRESC_SHIFT; + ret /= (presc + 1); + + /* Keep CMSIS system clock variable up-to-date */ + SystemCoreClock = ret; + + return ret; +} + + +/***************************************************************************//** + * @brief + * Get the maximum core clock frequency. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * The maximum core clock frequency in Hz. + ******************************************************************************/ +uint32_t SystemMaxCoreClockGet(void) +{ + return (EFR32_HFRCO_MAX_FREQ > EFR32_HFXO_FREQ ? \ + EFR32_HFRCO_MAX_FREQ : EFR32_HFXO_FREQ); +} + + +/***************************************************************************//** + * @brief + * Get the current HFCLK frequency. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * The current HFCLK frequency in Hz. + ******************************************************************************/ +uint32_t SystemHFClockGet(void) +{ + uint32_t ret; + + switch (CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) + { + case CMU_HFCLKSTATUS_SELECTED_LFXO: +#if (EFR32_LFXO_FREQ > 0) + ret = SystemLFXOClock; +#else + /* We should not get here, since core should not be clocked. May */ + /* be caused by a misconfiguration though. */ + ret = 0; +#endif + break; + + case CMU_HFCLKSTATUS_SELECTED_LFRCO: + ret = EFR32_LFRCO_FREQ; + break; + + case CMU_HFCLKSTATUS_SELECTED_HFXO: +#if (EFR32_HFXO_FREQ > 0) + ret = SystemHFXOClock; +#else + /* We should not get here, since core should not be clocked. May */ + /* be caused by a misconfiguration though. */ + ret = 0; +#endif + break; + + default: /* CMU_HFCLKSTATUS_SELECTED_HFRCO */ + ret = SystemHfrcoFreq; + break; + } + + return ret / (1U + ((CMU->HFPRESC & _CMU_HFPRESC_PRESC_MASK) + >> _CMU_HFPRESC_PRESC_SHIFT)); +} + + +/**************************************************************************//** + * @brief + * Get high frequency crystal oscillator clock frequency for target system. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * HFXO frequency in Hz. + *****************************************************************************/ +uint32_t SystemHFXOClockGet(void) +{ + /* External crystal oscillator present? */ +#if (EFR32_HFXO_FREQ > 0) + return SystemHFXOClock; +#else + return 0; +#endif +} + + +/**************************************************************************//** + * @brief + * Set high frequency crystal oscillator clock frequency for target system. + * + * @note + * This function is mainly provided for being able to handle target systems + * with different HF crystal oscillator frequencies run-time. If used, it + * should probably only be used once during system startup. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @param[in] freq + * HFXO frequency in Hz used for target. + *****************************************************************************/ +void SystemHFXOClockSet(uint32_t freq) +{ + /* External crystal oscillator present? */ +#if (EFR32_HFXO_FREQ > 0) + SystemHFXOClock = freq; + + /* Update core clock frequency if HFXO is used to clock core */ + if ((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) == CMU_HFCLKSTATUS_SELECTED_HFXO) + { + /* The function will update the global variable */ + SystemCoreClockGet(); + } +#else + (void)freq; /* Unused parameter */ +#endif +} + + +/**************************************************************************//** + * @brief + * Initialize the system. + * + * @details + * Do required generic HW system init. + * + * @note + * This function is invoked during system init, before the main() routine + * and any data has been initialized. For this reason, it cannot do any + * initialization of variables etc. + *****************************************************************************/ +void SystemInit(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + /* Set floating point coprosessor access mode. */ + SCB->CPACR |= ((3UL << 10*2) | /* set CP10 Full Access */ + (3UL << 11*2) ); /* set CP11 Full Access */ +#endif +} + + +/**************************************************************************//** + * @brief + * Get low frequency RC oscillator clock frequency for target system. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * LFRCO frequency in Hz. + *****************************************************************************/ +uint32_t SystemLFRCOClockGet(void) +{ + /* Currently we assume that this frequency is properly tuned during */ + /* manufacturing and is not changed after reset. If future requirements */ + /* for re-tuning by user, we can add support for that. */ + return EFR32_LFRCO_FREQ; +} + + +/**************************************************************************//** + * @brief + * Get ultra low frequency RC oscillator clock frequency for target system. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * ULFRCO frequency in Hz. + *****************************************************************************/ +uint32_t SystemULFRCOClockGet(void) +{ + /* The ULFRCO frequency is not tuned, and can be very inaccurate */ + return EFR32_ULFRCO_FREQ; +} + + +/**************************************************************************//** + * @brief + * Get low frequency crystal oscillator clock frequency for target system. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @return + * LFXO frequency in Hz. + *****************************************************************************/ +uint32_t SystemLFXOClockGet(void) +{ + /* External crystal oscillator present? */ +#if (EFR32_LFXO_FREQ > 0) + return SystemLFXOClock; +#else + return 0; +#endif +} + + +/**************************************************************************//** + * @brief + * Set low frequency crystal oscillator clock frequency for target system. + * + * @note + * This function is mainly provided for being able to handle target systems + * with different HF crystal oscillator frequencies run-time. If used, it + * should probably only be used once during system startup. + * + * @note + * This is an EFR32 proprietary function, not part of the CMSIS definition. + * + * @param[in] freq + * LFXO frequency in Hz used for target. + *****************************************************************************/ +void SystemLFXOClockSet(uint32_t freq) +{ + /* External crystal oscillator present? */ +#if (EFR32_LFXO_FREQ > 0) + SystemLFXOClock = freq; + + /* Update core clock frequency if LFXO is used to clock core */ + if ((CMU->HFCLKSTATUS & _CMU_HFCLKSTATUS_SELECTED_MASK) == CMU_HFCLKSTATUS_SELECTED_LFXO) + { + /* The function will update the global variable */ + SystemCoreClockGet(); + } +#else + (void)freq; /* Unused parameter */ +#endif +}