Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/port_api.c
- Revision:
- 18:6a4db94011d3
diff -r f713758f6238 -r 6a4db94011d3 mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/port_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/port_api.c Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,162 @@ +/** + ****************************************************************************** + * @file port_api.c + * @brief Implementation of a port API + * @internal + * @author ON Semiconductor + * $Rev: + * $Date: + ****************************************************************************** + * Copyright 2016 Semiconductor Components Industries LLC (d/b/a ON Semiconductor). + * All rights reserved. This software and/or documentation is licensed by ON Semiconductor + * under limited terms and conditions. The terms and conditions pertaining to the software + * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf + * (ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software) and + * if applicable the software license agreement. Do not use this software and/or + * documentation unless you have carefully read and you agree to the limited terms and + * conditions. By using this software and/or documentation, you agree to the limited + * terms and conditions. + * + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, + * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + */ +#include "gpio.h" +#include "gpio_api.h" +#include "port_api.h" +#include "pinmap.h" + +#if DEVICE_PORTIN || DEVICE_PORTOUT + +/** Get the pin name from the port's pin number + * + * @param port The port name + * @param pin_n The pin number within the specified port + * @return The pin name for the port's pin number + */ +PinName port_pin(PortName port, int pin_n) +{ + return((PinName)(pin_n)); +} + +/** Initilize the port + * + * @param obj The port object to initialize + * @param port The port name + * @param mask The bitmask to identify which bits in the port should be included (0 - ignore) + * @param dir The port direction + */ +void port_init(port_t *obj, PortName port, int mask, PinDirection dir) +{ + uint8_t i; + PinName pin; + + /* Store the port mask in obj */ + obj->mask = mask; + + /* Store the port name in obj */ + obj->port = port; + + /* Store GPIO base address */ + obj->GPIOMEMBASE = GPIOREG; + + for (i=0; i<NUMBER_OF_GPIO; i++) { + /* check for valid pin */ + if (obj->mask & (1<<i)) { + + /* Gpio numbers start from DIO#0 to #17, so can pass in "i" */ + pin = port_pin(obj->port, i); + + /* Set the pin as GPIO */ + gpio_set(pin); + } + } + + /* Call function to set pin direction */ + port_dir(obj, dir); +} + +/** Set the input port mode + * + * @param obj The port object + * @param mode THe port mode to be set + */ +void port_mode(port_t *obj, PinMode mode) +{ + uint8_t i = 0; + PinName pin; + + /* For each pin in the mask, set the mode to that defined in "mode" parameter */ + for (i=0; i < NUMBER_OF_GPIO; i++) { + /* check for valid pin */ + if (obj->mask & (1<<i)) { + + /* get the pin name */ + pin = port_pin(obj->port, i); + + /* Set the mode for the pin */ + pin_mode(pin, mode); + } + } +} + +/** Set port direction (in/out) + * + * @param obj The port object + * @param dir The port direction to be set + */ +void port_dir(port_t *obj, PinDirection dir) +{ + /* Enable the GPIO clock */ + CLOCK_ENABLE(CLOCK_GPIO); + + if (dir == PIN_INPUT) { + obj->GPIOMEMBASE->W_IN = obj->mask; + } else if (dir == PIN_OUTPUT) { + obj->GPIOMEMBASE->W_OUT = obj->mask; + } + + /* Disable the GPIO clock */ + CLOCK_DISABLE(CLOCK_GPIO); +} + +/** Write value to the port + * + * @param obj The port object + * @param value The value to be set + */ +void port_write(port_t *obj, int value) +{ + /* Enable the GPIO clock */ + CLOCK_ENABLE(CLOCK_GPIO); + + obj->GPIOMEMBASE->R_STATE_W_SET = value;//(obj->mask & value); + obj->GPIOMEMBASE->R_IRQ_W_CLEAR = ~value;//(obj->mask ^ value); + + /* Disable the GPIO clock */ + CLOCK_DISABLE(CLOCK_GPIO); +} + +/** Read the current value on the port + * + * @param obj The port object + * @return An integer with each bit corresponding to an associated port pin setting + */ +int port_read(port_t *obj) +{ + int gpio_level = 0; + + /* Enable the GPIO clock */ + CLOCK_ENABLE(CLOCK_GPIO); + + gpio_level = obj->GPIOMEMBASE->R_STATE_W_SET; + + /* Disable the GPIO clock */ + CLOCK_DISABLE(CLOCK_GPIO); + + return(gpio_level); +} + +#endif