Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_pdma.c
- Revision:
- 18:6a4db94011d3
diff -r f713758f6238 -r 6a4db94011d3 mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_pdma.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_pdma.c Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,313 @@ +/**************************************************************************//** + * @file pdma.c + * @version V1.00 + * $Revision: 7 $ + * $Date: 14/05/29 1:13p $ + * @brief NUC472/NUC442 PDMA driver source file + * + * @note + * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. +*****************************************************************************/ +#include "NUC472_442.h" + + +static uint8_t u32ChSelect[PDMA_CH_MAX]; + +/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver + @{ +*/ + +/** @addtogroup NUC472_442_PDMA_Driver PDMA Driver + @{ +*/ + + +/** @addtogroup NUC472_442_PDMA_EXPORTED_FUNCTIONS PDMA Exported Functions + @{ +*/ + +/** + * @brief PDMA Open + * + * @param[in] u32Mask Channel enable bits. + * + * @return None + * + * @details This function enable the PDMA channels. + */ +void PDMA_Open(uint32_t u32Mask) +{ + int volatile i; + + for (i=0; i<PDMA_CH_MAX; i++) { + PDMA->DSCT[i].CTL = 0; + u32ChSelect[i] = 0x1f; + } + + PDMA->CHCTL |= u32Mask; +} + +/** + * @brief PDMA Close + * + * @param[in] None + * + * @return None + * + * @details This function disable all PDMA channels. + */ +void PDMA_Close(void) +{ + PDMA->CHCTL = 0; +} + +/** + * @brief Set PDMA Transfer Count + * + * @param[in] u32Ch The selected channel + * @param[in] u32Width Data width. PDMA_WIDTH_8, PDMA_WIDTH_16, or PDMA_WIDTH_32 + * @param[in] u32TransCount Transfer count + * + * @return None + * + * @details This function set the selected channel data width and transfer count. + */ +void PDMA_SetTransferCnt(uint32_t u32Ch, uint32_t u32Width, uint32_t u32TransCount) +{ + PDMA->DSCT[u32Ch].CTL &= ~(PDMA_DSCT_CTL_TXCNT_Msk | PDMA_DSCT_CTL_TXWIDTH_Msk); + PDMA->DSCT[u32Ch].CTL |= (u32Width | ((u32TransCount-1) << PDMA_DSCT_CTL_TXCNT_Pos)); +} + +/** + * @brief Set PDMA Transfer Address + * + * @param[in] u32Ch The selected channel + * @param[in] u32SrcAddr Source address + * @param[in] u32SrcCtrl Source control attribute. PDMA_SAR_INC or PDMA_SAR_FIX + * @param[in] u32DstAddr destination address + * @param[in] u32DstCtrl destination control attribute. PDMA_DAR_INC or PDMA_DAR_FIX + * + * @return None + * + * @details This function set the selected channel source/destination address and attribute. + */ +void PDMA_SetTransferAddr(uint32_t u32Ch, uint32_t u32SrcAddr, uint32_t u32SrcCtrl, uint32_t u32DstAddr, uint32_t u32DstCtrl) +{ + PDMA->DSCT[u32Ch].ENDSA = u32SrcAddr; + PDMA->DSCT[u32Ch].ENDDA = u32DstAddr; + PDMA->DSCT[u32Ch].CTL &= ~(PDMA_DSCT_CTL_SAINC_Msk | PDMA_DSCT_CTL_DAINC_Msk); + PDMA->DSCT[u32Ch].CTL |= (u32SrcCtrl | u32DstCtrl); +} + +/** + * @brief Set PDMA Transfer Mode + * + * @param[in] u32Ch The selected channel + * @param[in] u32Peripheral The selected peripheral. PDMA_SPI0_TX, PDMA_UART0_TX, PDMA_I2S_TX,...PDMA_MEM + * @param[in] u32ScatterEn Scatter-gather mode enable + * @param[in] u32DescAddr Scatter-gather descriptor address + * + * @return None + * + * @details This function set the selected channel transfer mode. Include peripheral setting. + */ +void PDMA_SetTransferMode(uint32_t u32Ch, uint32_t u32Peripheral, uint32_t u32ScatterEn, uint32_t u32DescAddr) +{ + u32ChSelect[u32Ch] = u32Peripheral; + switch (u32Ch) { + case 0: + PDMA->REQSEL0_3 = (PDMA->REQSEL0_3 & ~PDMA_REQSEL0_3_REQSRC0_Msk) | u32Peripheral; + break; + case 1: + PDMA->REQSEL0_3 = (PDMA->REQSEL0_3 & ~PDMA_REQSEL0_3_REQSRC1_Msk) | (u32Peripheral << PDMA_REQSEL0_3_REQSRC1_Pos); + break; + case 2: + PDMA->REQSEL0_3 = (PDMA->REQSEL0_3 & ~PDMA_REQSEL0_3_REQSRC2_Msk) | (u32Peripheral << PDMA_REQSEL0_3_REQSRC2_Pos); + break; + case 3: + PDMA->REQSEL0_3 = (PDMA->REQSEL0_3 & ~PDMA_REQSEL0_3_REQSRC3_Msk) | (u32Peripheral << PDMA_REQSEL0_3_REQSRC3_Pos); + break; + case 4: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL4_7_REQSRC4_Msk) | u32Peripheral; + break; + case 5: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL4_7_REQSRC5_Msk) | (u32Peripheral << PDMA_REQSEL4_7_REQSRC5_Pos); + break; + case 6: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL4_7_REQSRC6_Msk) | (u32Peripheral << PDMA_REQSEL4_7_REQSRC6_Pos); + break; + case 7: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL4_7_REQSRC7_Msk) | (u32Peripheral << PDMA_REQSEL4_7_REQSRC7_Pos); + break; + case 8: + PDMA->REQSEL8_11 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL8_11_REQSRC8_Msk) | u32Peripheral; + break; + case 9: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL8_11_REQSRC9_Msk) | (u32Peripheral << PDMA_REQSEL8_11_REQSRC9_Pos); + break; + case 10: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL8_11_REQSRC10_Msk) | (u32Peripheral << PDMA_REQSEL8_11_REQSRC10_Pos); + break; + case 11: + PDMA->REQSEL4_7 = (PDMA->REQSEL4_7 & ~PDMA_REQSEL8_11_REQSRC11_Msk) | (u32Peripheral << PDMA_REQSEL8_11_REQSRC11_Pos); + break; + case 12: + PDMA->REQSEL12_15 = (PDMA->REQSEL12_15 & ~PDMA_REQSEL12_15_REQSRC12_Msk) | u32Peripheral; + break; + case 13: + PDMA->REQSEL12_15 = (PDMA->REQSEL12_15 & ~PDMA_REQSEL12_15_REQSRC13_Msk) | (u32Peripheral << PDMA_REQSEL12_15_REQSRC13_Pos); + break; + case 14: + PDMA->REQSEL12_15 = (PDMA->REQSEL12_15 & ~PDMA_REQSEL12_15_REQSRC14_Msk) | (u32Peripheral << PDMA_REQSEL12_15_REQSRC14_Pos); + break; + case 15: + PDMA->REQSEL12_15 = (PDMA->REQSEL12_15 & ~PDMA_REQSEL12_15_REQSRC15_Msk) | (u32Peripheral << PDMA_REQSEL12_15_REQSRC15_Pos); + break; + default: + ; + } + + if (u32ScatterEn) { + PDMA->DSCT[u32Ch].CTL = (PDMA->DSCT[u32Ch].CTL & ~PDMA_DSCT_CTL_OPMODE_Msk) | PDMA_OP_SCATTER; + PDMA->DSCT[u32Ch].NEXT = u32DescAddr - (PDMA->SCATBA); + } else + PDMA->DSCT[u32Ch].CTL = (PDMA->DSCT[u32Ch].CTL & ~PDMA_DSCT_CTL_OPMODE_Msk) | PDMA_OP_BASIC; +} + +/** + * @brief Set PDMA Burst Type + * + * @param[in] u32Ch The selected channel + * @param[in] u32BurstType Burst mode or single mode + * @param[in] u32BurstSize Set the size of burst mode + * + * @return None + * + * @details This function set the selected channel burst type and size. + */ +void PDMA_SetBurstType(uint32_t u32Ch, uint32_t u32BurstType, uint32_t u32BurstSize) +{ + PDMA->DSCT[u32Ch].CTL &= ~(PDMA_DSCT_CTL_TXTYPE_Msk | PDMA_DSCT_CTL_BURSIZE_Msk); + PDMA->DSCT[u32Ch].CTL |= (u32BurstType | u32BurstSize); +} + +/** + * @brief Set PDMA TimeOut Count + * + * @param[in] u32Ch The selected channel + * @param[in] u32OnOff Enable/disable time out function + * @param[in] u32TimeOutCnt Timeout count + * + * @return None + * + * @details This function set the timeout count. + */ +void PDMA_SetTimeOut(uint32_t u32Ch, uint32_t u32OnOff, uint32_t u32TimeOutCnt) +{ + switch(u32Ch) { + case 0: + PDMA->TOC0_1 = (PDMA->TOC0_1 & ~PDMA_TOC0_1_TOC0_Msk) | u32TimeOutCnt; + break; + case 1: + PDMA->TOC0_1 = (PDMA->TOC0_1 & ~PDMA_TOC0_1_TOC1_Msk) | (u32TimeOutCnt << PDMA_TOC0_1_TOC1_Pos); + break; + case 2: + PDMA->TOC2_3 = (PDMA->TOC2_3 & ~PDMA_TOC2_3_TOC2_Msk) | u32TimeOutCnt; + break; + case 3: + PDMA->TOC2_3 = (PDMA->TOC2_3 & ~PDMA_TOC2_3_TOC3_Msk) | (u32TimeOutCnt << PDMA_TOC2_3_TOC3_Pos); + break; + case 4: + PDMA->TOC4_5 = (PDMA->TOC4_5 & ~PDMA_TOC4_5_TOC4_Msk) | u32TimeOutCnt; + break; + case 5: + PDMA->TOC4_5 = (PDMA->TOC4_5 & ~PDMA_TOC4_5_TOC5_Msk) | (u32TimeOutCnt << PDMA_TOC4_5_TOC5_Pos); + break; + case 6: + PDMA->TOC6_7 = (PDMA->TOC6_7 & ~PDMA_TOC6_7_TOC6_Msk) | u32TimeOutCnt; + break; + case 7: + PDMA->TOC6_7 = (PDMA->TOC6_7 & ~PDMA_TOC6_7_TOC7_Msk) | (u32TimeOutCnt << PDMA_TOC6_7_TOC7_Pos); + break; + case 8: + PDMA->TOC8_9 = (PDMA->TOC8_9 & ~PDMA_TOC8_9_TOC8_Msk) | u32TimeOutCnt; + break; + case 9: + PDMA->TOC8_9 = (PDMA->TOC8_9 & ~PDMA_TOC8_9_TOC9_Msk) | (u32TimeOutCnt << PDMA_TOC8_9_TOC9_Pos); + break; + case 10: + PDMA->TOC10_11 = (PDMA->TOC10_11 & ~PDMA_TOC10_11_TOC10_Msk) | u32TimeOutCnt; + break; + case 11: + PDMA->TOC10_11 = (PDMA->TOC10_11 & ~PDMA_TOC10_11_TOC11_Msk) | (u32TimeOutCnt << PDMA_TOC10_11_TOC11_Pos); + break; + case 12: + PDMA->TOC12_13 = (PDMA->TOC12_13 & ~PDMA_TOC12_13_TOC12_Msk) | u32TimeOutCnt; + break; + case 13: + PDMA->TOC12_13 = (PDMA->TOC12_13 & ~PDMA_TOC12_13_TOC13_Msk) | (u32TimeOutCnt << PDMA_TOC12_13_TOC13_Pos); + break; + case 14: + PDMA->TOC14_15 = (PDMA->TOC14_15 & ~PDMA_TOC14_15_TOC14_Msk) | u32TimeOutCnt; + break; + case 15: + PDMA->TOC14_15 = (PDMA->TOC14_15 & ~PDMA_TOC14_15_TOC15_Msk) | (u32TimeOutCnt << PDMA_TOC14_15_TOC15_Pos); + break; + default: + ; + } +} + + +/** + * @brief Trigger PDMA + * + * @param[in] u32Ch The selected channel + * + * @return None + * + * @details This function trigger the selected channel. + */ +void PDMA_Trigger(uint32_t u32Ch) +{ + if (u32ChSelect[u32Ch] == PDMA_MEM) + PDMA->SWREQ = (1 << u32Ch); +} + +/** + * @brief Enable Interrupt + * + * @param[in] u32Ch The selected channel + * @param[in] u32Mask The Interrupt Type + * + * @return None + * + * @details This function enable the selected channel interrupt. + */ +void PDMA_EnableInt(uint32_t u32Ch, uint32_t u32Mask) +{ + PDMA->INTEN |= (1 << u32Ch); +} + +/** + * @brief Disable Interrupt + * + * @param[in] u32Ch The selected channel + * @param[in] u32Mask The Interrupt Type + * + * @return None + * + * @details This function disable the selected channel interrupt. + */ +void PDMA_DisableInt(uint32_t u32Ch, uint32_t u32Mask) +{ + PDMA->INTEN &= ~(1 << u32Ch); +} + +/*@}*/ /* end of group NUC472_442_PDMA_EXPORTED_FUNCTIONS */ + +/*@}*/ /* end of group NUC472_442_PDMA_Driver */ + +/*@}*/ /* end of group NUC472_442_Device_Driver */ + +/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/