Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF51822_UNIFIED/sdk/softdevice/s130/headers/nrf_ble_hci.h
- Revision:
- 18:6a4db94011d3
diff -r f713758f6238 -r 6a4db94011d3 mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF51822_UNIFIED/sdk/softdevice/s130/headers/nrf_ble_hci.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF51822_UNIFIED/sdk/softdevice/s130/headers/nrf_ble_hci.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,134 @@ +/* + * Copyright (c) 2000 Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA + * integrated circuit in a product or a software update for such product, must reproduce + * the above copyright notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be + * used to endorse or promote products derived from this software without specific prior + * written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary or object form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + +/** + @addtogroup BLE_COMMON + @{ +*/ + + +#ifndef NRF_BLE_HCI_H__ +#define NRF_BLE_HCI_H__ +#ifdef __cplusplus +extern "C" { +#endif + +/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes + * @{ */ + +#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 /**< Success. */ +#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 /**< Unknown BLE Command. */ +#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 /**< Unknown Connection Identifier. */ +/*0x03 Hardware Failure +0x04 Page Timeout +*/ +#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 /**< Authentication Failure. */ +#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 /**< Pin or Key missing. */ +#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 /**< Memory Capacity Exceeded. */ +#define BLE_HCI_CONNECTION_TIMEOUT 0x08 /**< Connection Timeout. */ +/*0x09 Connection Limit Exceeded +0x0A Synchronous Connection Limit To A Device Exceeded +0x0B ACL Connection Already Exists*/ +#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C /**< Command Disallowed. */ +/*0x0D Connection Rejected due to Limited Resources +0x0E Connection Rejected Due To Security Reasons +0x0F Connection Rejected due to Unacceptable BD_ADDR +0x10 Connection Accept Timeout Exceeded +0x11 Unsupported Feature or Parameter Value*/ +#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 /**< Invalid BLE Command Parameters. */ +#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 /**< Remote User Terminated Connection. */ +#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 /**< Remote Device Terminated Connection due to low resources.*/ +#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 /**< Remote Device Terminated Connection due to power off. */ +#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 /**< Local Host Terminated Connection. */ +/* +0x17 Repeated Attempts +0x18 Pairing Not Allowed +0x19 Unknown LMP PDU +*/ +#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A /**< Unsupported Remote Feature. */ +/* +0x1B SCO Offset Rejected +0x1C SCO Interval Rejected +0x1D SCO Air Mode Rejected*/ +#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E /**< Invalid LMP Parameters. */ +#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F /**< Unspecified Error. */ +/*0x20 Unsupported LMP Parameter Value +0x21 Role Change Not Allowed +*/ +#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 /**< LMP Response Timeout. */ +/*0x23 LMP Error Transaction Collision*/ +#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 /**< LMP PDU Not Allowed. */ +/*0x25 Encryption Mode Not Acceptable +0x26 Link Key Can Not be Changed +0x27 Requested QoS Not Supported +*/ +#define BLE_HCI_INSTANT_PASSED 0x28 /**< Instant Passed. */ +#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 /**< Pairing with Unit Key Unsupported. */ +#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A /**< Different Transaction Collision. */ +/* +0x2B Reserved +0x2C QoS Unacceptable Parameter +0x2D QoS Rejected +0x2E Channel Classification Not Supported +0x2F Insufficient Security +0x30 Parameter Out Of Mandatory Range +0x31 Reserved +0x32 Role Switch Pending +0x33 Reserved +0x34 Reserved Slot Violation +0x35 Role Switch Failed +0x36 Extended Inquiry Response Too Large +0x37 Secure Simple Pairing Not Supported By Host. +0x38 Host Busy - Pairing +0x39 Connection Rejected due to No Suitable Channel Found*/ +#define BLE_HCI_CONTROLLER_BUSY 0x3A /**< Controller Busy. */ +#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B /**< Connection Interval Unacceptable. */ +#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C /**< Directed Adverisement Timeout. */ +#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D /**< Connection Terminated due to MIC Failure. */ +#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E /**< Connection Failed to be Established. */ + +/** @} */ + + +#ifdef __cplusplus +} +#endif +#endif // NRF_BLE_HCI_H__ + +/** @} */