Mouse code for the MacroRat
mbed-dev/targets/TARGET_Atmel/TARGET_SAM_CortexM0P/drivers/extint/TARGET_SAMR21/extint.c@18:6a4db94011d3, 2017-05-14 (annotated)
- Committer:
- sahilmgandhi
- Date:
- Sun May 14 23:18:57 2017 +0000
- Revision:
- 18:6a4db94011d3
Publishing again
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
sahilmgandhi | 18:6a4db94011d3 | 1 | /** |
sahilmgandhi | 18:6a4db94011d3 | 2 | * \file |
sahilmgandhi | 18:6a4db94011d3 | 3 | * |
sahilmgandhi | 18:6a4db94011d3 | 4 | * \brief SAM External Interrupt Driver |
sahilmgandhi | 18:6a4db94011d3 | 5 | * |
sahilmgandhi | 18:6a4db94011d3 | 6 | * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved. |
sahilmgandhi | 18:6a4db94011d3 | 7 | * |
sahilmgandhi | 18:6a4db94011d3 | 8 | * \asf_license_start |
sahilmgandhi | 18:6a4db94011d3 | 9 | * |
sahilmgandhi | 18:6a4db94011d3 | 10 | * \page License |
sahilmgandhi | 18:6a4db94011d3 | 11 | * |
sahilmgandhi | 18:6a4db94011d3 | 12 | * Redistribution and use in source and binary forms, with or without |
sahilmgandhi | 18:6a4db94011d3 | 13 | * modification, are permitted provided that the following conditions are met: |
sahilmgandhi | 18:6a4db94011d3 | 14 | * |
sahilmgandhi | 18:6a4db94011d3 | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
sahilmgandhi | 18:6a4db94011d3 | 16 | * this list of conditions and the following disclaimer. |
sahilmgandhi | 18:6a4db94011d3 | 17 | * |
sahilmgandhi | 18:6a4db94011d3 | 18 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
sahilmgandhi | 18:6a4db94011d3 | 19 | * this list of conditions and the following disclaimer in the documentation |
sahilmgandhi | 18:6a4db94011d3 | 20 | * and/or other materials provided with the distribution. |
sahilmgandhi | 18:6a4db94011d3 | 21 | * |
sahilmgandhi | 18:6a4db94011d3 | 22 | * 3. The name of Atmel may not be used to endorse or promote products derived |
sahilmgandhi | 18:6a4db94011d3 | 23 | * from this software without specific prior written permission. |
sahilmgandhi | 18:6a4db94011d3 | 24 | * |
sahilmgandhi | 18:6a4db94011d3 | 25 | * 4. This software may only be redistributed and used in connection with an |
sahilmgandhi | 18:6a4db94011d3 | 26 | * Atmel microcontroller product. |
sahilmgandhi | 18:6a4db94011d3 | 27 | * |
sahilmgandhi | 18:6a4db94011d3 | 28 | * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED |
sahilmgandhi | 18:6a4db94011d3 | 29 | * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
sahilmgandhi | 18:6a4db94011d3 | 30 | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE |
sahilmgandhi | 18:6a4db94011d3 | 31 | * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR |
sahilmgandhi | 18:6a4db94011d3 | 32 | * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
sahilmgandhi | 18:6a4db94011d3 | 33 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
sahilmgandhi | 18:6a4db94011d3 | 34 | * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
sahilmgandhi | 18:6a4db94011d3 | 35 | * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
sahilmgandhi | 18:6a4db94011d3 | 36 | * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
sahilmgandhi | 18:6a4db94011d3 | 37 | * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
sahilmgandhi | 18:6a4db94011d3 | 38 | * POSSIBILITY OF SUCH DAMAGE. |
sahilmgandhi | 18:6a4db94011d3 | 39 | * |
sahilmgandhi | 18:6a4db94011d3 | 40 | * \asf_license_stop |
sahilmgandhi | 18:6a4db94011d3 | 41 | * |
sahilmgandhi | 18:6a4db94011d3 | 42 | */ |
sahilmgandhi | 18:6a4db94011d3 | 43 | /* |
sahilmgandhi | 18:6a4db94011d3 | 44 | * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> |
sahilmgandhi | 18:6a4db94011d3 | 45 | */ |
sahilmgandhi | 18:6a4db94011d3 | 46 | #include <system.h> |
sahilmgandhi | 18:6a4db94011d3 | 47 | #include <system_interrupt.h> |
sahilmgandhi | 18:6a4db94011d3 | 48 | #include <extint.h> |
sahilmgandhi | 18:6a4db94011d3 | 49 | #include <conf_extint.h> |
sahilmgandhi | 18:6a4db94011d3 | 50 | |
sahilmgandhi | 18:6a4db94011d3 | 51 | #if !defined(EXTINT_CLOCK_SOURCE) || defined(__DOXYGEN__) |
sahilmgandhi | 18:6a4db94011d3 | 52 | # warning EXTINT_CLOCK_SOURCE is not defined, assuming GCLK_GENERATOR_0. |
sahilmgandhi | 18:6a4db94011d3 | 53 | |
sahilmgandhi | 18:6a4db94011d3 | 54 | /** Configuration option, setting the EIC clock source which can be used for |
sahilmgandhi | 18:6a4db94011d3 | 55 | * EIC edge detection or filtering. This option may be overridden in the module |
sahilmgandhi | 18:6a4db94011d3 | 56 | * configuration header file \c conf_extint.h. |
sahilmgandhi | 18:6a4db94011d3 | 57 | */ |
sahilmgandhi | 18:6a4db94011d3 | 58 | # define EXTINT_CLOCK_SOURCE GCLK_GENERATOR_0 |
sahilmgandhi | 18:6a4db94011d3 | 59 | #endif |
sahilmgandhi | 18:6a4db94011d3 | 60 | |
sahilmgandhi | 18:6a4db94011d3 | 61 | /** |
sahilmgandhi | 18:6a4db94011d3 | 62 | * \internal |
sahilmgandhi | 18:6a4db94011d3 | 63 | * Internal driver device instance struct. |
sahilmgandhi | 18:6a4db94011d3 | 64 | */ |
sahilmgandhi | 18:6a4db94011d3 | 65 | struct _extint_module _extint_dev; |
sahilmgandhi | 18:6a4db94011d3 | 66 | |
sahilmgandhi | 18:6a4db94011d3 | 67 | /** |
sahilmgandhi | 18:6a4db94011d3 | 68 | * \brief Determin if the general clock is required |
sahilmgandhi | 18:6a4db94011d3 | 69 | * |
sahilmgandhi | 18:6a4db94011d3 | 70 | * \param[in] filter_input_signal Filter the raw input signal to prevent noise |
sahilmgandhi | 18:6a4db94011d3 | 71 | * \param[in] detection_criteria Edge detection mode to use (\ref extint_detect) |
sahilmgandhi | 18:6a4db94011d3 | 72 | */ |
sahilmgandhi | 18:6a4db94011d3 | 73 | #define _extint_is_gclk_required(filter_input_signal, detection_criteria) \ |
sahilmgandhi | 18:6a4db94011d3 | 74 | ((filter_input_signal) ? true : (\ |
sahilmgandhi | 18:6a4db94011d3 | 75 | (EXTINT_DETECT_RISING == (detection_criteria)) ? true : (\ |
sahilmgandhi | 18:6a4db94011d3 | 76 | (EXTINT_DETECT_FALLING == (detection_criteria)) ? true : (\ |
sahilmgandhi | 18:6a4db94011d3 | 77 | (EXTINT_DETECT_BOTH == (detection_criteria)) ? true : false)))) |
sahilmgandhi | 18:6a4db94011d3 | 78 | |
sahilmgandhi | 18:6a4db94011d3 | 79 | static void _extint_enable(void); |
sahilmgandhi | 18:6a4db94011d3 | 80 | static void _extint_disable(void); |
sahilmgandhi | 18:6a4db94011d3 | 81 | |
sahilmgandhi | 18:6a4db94011d3 | 82 | /** |
sahilmgandhi | 18:6a4db94011d3 | 83 | * \brief Determines if the hardware module(s) are currently synchronizing to the bus. |
sahilmgandhi | 18:6a4db94011d3 | 84 | * |
sahilmgandhi | 18:6a4db94011d3 | 85 | * Checks to see if the underlying hardware peripheral module(s) are currently |
sahilmgandhi | 18:6a4db94011d3 | 86 | * synchronizing across multiple clock domains to the hardware bus, This |
sahilmgandhi | 18:6a4db94011d3 | 87 | * function can be used to delay further operations on a module until such time |
sahilmgandhi | 18:6a4db94011d3 | 88 | * that it is ready, to prevent blocking delays for synchronization in the |
sahilmgandhi | 18:6a4db94011d3 | 89 | * user application. |
sahilmgandhi | 18:6a4db94011d3 | 90 | * |
sahilmgandhi | 18:6a4db94011d3 | 91 | * \return Synchronization status of the underlying hardware module(s). |
sahilmgandhi | 18:6a4db94011d3 | 92 | * |
sahilmgandhi | 18:6a4db94011d3 | 93 | * \retval true If the module synchronization is ongoing |
sahilmgandhi | 18:6a4db94011d3 | 94 | * \retval false If the module has completed synchronization |
sahilmgandhi | 18:6a4db94011d3 | 95 | */ |
sahilmgandhi | 18:6a4db94011d3 | 96 | static inline bool extint_is_syncing(void) |
sahilmgandhi | 18:6a4db94011d3 | 97 | { |
sahilmgandhi | 18:6a4db94011d3 | 98 | Eic *const eics[EIC_INST_NUM] = EIC_INSTS; |
sahilmgandhi | 18:6a4db94011d3 | 99 | |
sahilmgandhi | 18:6a4db94011d3 | 100 | for (uint32_t i = 0; i < EIC_INST_NUM; i++) { |
sahilmgandhi | 18:6a4db94011d3 | 101 | if (eics[i]->STATUS.reg & EIC_STATUS_SYNCBUSY) { |
sahilmgandhi | 18:6a4db94011d3 | 102 | return true; |
sahilmgandhi | 18:6a4db94011d3 | 103 | } |
sahilmgandhi | 18:6a4db94011d3 | 104 | } |
sahilmgandhi | 18:6a4db94011d3 | 105 | return false; |
sahilmgandhi | 18:6a4db94011d3 | 106 | } |
sahilmgandhi | 18:6a4db94011d3 | 107 | /** |
sahilmgandhi | 18:6a4db94011d3 | 108 | * \internal |
sahilmgandhi | 18:6a4db94011d3 | 109 | * \brief Initializes and enables the External Interrupt driver. |
sahilmgandhi | 18:6a4db94011d3 | 110 | * |
sahilmgandhi | 18:6a4db94011d3 | 111 | * Enable the clocks used by External Interrupt driver. |
sahilmgandhi | 18:6a4db94011d3 | 112 | * |
sahilmgandhi | 18:6a4db94011d3 | 113 | * Resets the External Interrupt driver, resetting all hardware |
sahilmgandhi | 18:6a4db94011d3 | 114 | * module registers to their power-on defaults, then enable it for further use. |
sahilmgandhi | 18:6a4db94011d3 | 115 | * |
sahilmgandhi | 18:6a4db94011d3 | 116 | * Reset the callback list if callback mode is used. |
sahilmgandhi | 18:6a4db94011d3 | 117 | * |
sahilmgandhi | 18:6a4db94011d3 | 118 | * This function must be called before attempting to use any NMI or standard |
sahilmgandhi | 18:6a4db94011d3 | 119 | * external interrupt channel functions. |
sahilmgandhi | 18:6a4db94011d3 | 120 | * |
sahilmgandhi | 18:6a4db94011d3 | 121 | * \note When SYSTEM module is used, this function will be invoked by |
sahilmgandhi | 18:6a4db94011d3 | 122 | * \ref system_init() automatically if the module is included. |
sahilmgandhi | 18:6a4db94011d3 | 123 | */ |
sahilmgandhi | 18:6a4db94011d3 | 124 | void _system_extint_init(void); |
sahilmgandhi | 18:6a4db94011d3 | 125 | void _system_extint_init(void) |
sahilmgandhi | 18:6a4db94011d3 | 126 | { |
sahilmgandhi | 18:6a4db94011d3 | 127 | Eic *const eics[EIC_INST_NUM] = EIC_INSTS; |
sahilmgandhi | 18:6a4db94011d3 | 128 | |
sahilmgandhi | 18:6a4db94011d3 | 129 | /* Turn on the digital interface clock */ |
sahilmgandhi | 18:6a4db94011d3 | 130 | system_apb_clock_set_mask(SYSTEM_CLOCK_APB_APBA, PM_APBAMASK_EIC); |
sahilmgandhi | 18:6a4db94011d3 | 131 | |
sahilmgandhi | 18:6a4db94011d3 | 132 | /* Configure the generic clock for the module and enable it */ |
sahilmgandhi | 18:6a4db94011d3 | 133 | struct system_gclk_chan_config gclk_chan_conf; |
sahilmgandhi | 18:6a4db94011d3 | 134 | system_gclk_chan_get_config_defaults(&gclk_chan_conf); |
sahilmgandhi | 18:6a4db94011d3 | 135 | gclk_chan_conf.source_generator = EXTINT_CLOCK_SOURCE; |
sahilmgandhi | 18:6a4db94011d3 | 136 | system_gclk_chan_set_config(EIC_GCLK_ID, &gclk_chan_conf); |
sahilmgandhi | 18:6a4db94011d3 | 137 | |
sahilmgandhi | 18:6a4db94011d3 | 138 | /* Enable the clock anyway, since when needed it will be requested |
sahilmgandhi | 18:6a4db94011d3 | 139 | * by External Interrupt driver */ |
sahilmgandhi | 18:6a4db94011d3 | 140 | system_gclk_chan_enable(EIC_GCLK_ID); |
sahilmgandhi | 18:6a4db94011d3 | 141 | |
sahilmgandhi | 18:6a4db94011d3 | 142 | /* Reset all EIC hardware modules. */ |
sahilmgandhi | 18:6a4db94011d3 | 143 | for (uint32_t i = 0; i < EIC_INST_NUM; i++) { |
sahilmgandhi | 18:6a4db94011d3 | 144 | eics[i]->CTRL.reg |= EIC_CTRL_SWRST; |
sahilmgandhi | 18:6a4db94011d3 | 145 | } |
sahilmgandhi | 18:6a4db94011d3 | 146 | |
sahilmgandhi | 18:6a4db94011d3 | 147 | while (extint_is_syncing()) { |
sahilmgandhi | 18:6a4db94011d3 | 148 | /* Wait for all hardware modules to complete synchronization */ |
sahilmgandhi | 18:6a4db94011d3 | 149 | } |
sahilmgandhi | 18:6a4db94011d3 | 150 | |
sahilmgandhi | 18:6a4db94011d3 | 151 | /* Reset the software module */ |
sahilmgandhi | 18:6a4db94011d3 | 152 | #if EXTINT_CALLBACK_MODE == true |
sahilmgandhi | 18:6a4db94011d3 | 153 | /* Clear callback registration table */ |
sahilmgandhi | 18:6a4db94011d3 | 154 | for (uint8_t j = 0; j < EIC_NUMBER_OF_INTERRUPTS; j++) { |
sahilmgandhi | 18:6a4db94011d3 | 155 | _extint_dev.callbacks[j] = NULL; |
sahilmgandhi | 18:6a4db94011d3 | 156 | } |
sahilmgandhi | 18:6a4db94011d3 | 157 | system_interrupt_enable(SYSTEM_INTERRUPT_MODULE_EIC); |
sahilmgandhi | 18:6a4db94011d3 | 158 | #endif |
sahilmgandhi | 18:6a4db94011d3 | 159 | |
sahilmgandhi | 18:6a4db94011d3 | 160 | /* Enables the driver for further use */ |
sahilmgandhi | 18:6a4db94011d3 | 161 | _extint_enable(); |
sahilmgandhi | 18:6a4db94011d3 | 162 | } |
sahilmgandhi | 18:6a4db94011d3 | 163 | |
sahilmgandhi | 18:6a4db94011d3 | 164 | /** |
sahilmgandhi | 18:6a4db94011d3 | 165 | * \internal |
sahilmgandhi | 18:6a4db94011d3 | 166 | * \brief Enables the External Interrupt driver. |
sahilmgandhi | 18:6a4db94011d3 | 167 | * |
sahilmgandhi | 18:6a4db94011d3 | 168 | * Enables EIC modules. |
sahilmgandhi | 18:6a4db94011d3 | 169 | * Registered callback list will not be affected if callback mode is used. |
sahilmgandhi | 18:6a4db94011d3 | 170 | */ |
sahilmgandhi | 18:6a4db94011d3 | 171 | void _extint_enable(void) |
sahilmgandhi | 18:6a4db94011d3 | 172 | { |
sahilmgandhi | 18:6a4db94011d3 | 173 | Eic *const eics[EIC_INST_NUM] = EIC_INSTS; |
sahilmgandhi | 18:6a4db94011d3 | 174 | |
sahilmgandhi | 18:6a4db94011d3 | 175 | /* Enable all EIC hardware modules. */ |
sahilmgandhi | 18:6a4db94011d3 | 176 | for (uint32_t i = 0; i < EIC_INST_NUM; i++) { |
sahilmgandhi | 18:6a4db94011d3 | 177 | eics[i]->CTRL.reg |= EIC_CTRL_ENABLE; |
sahilmgandhi | 18:6a4db94011d3 | 178 | } |
sahilmgandhi | 18:6a4db94011d3 | 179 | |
sahilmgandhi | 18:6a4db94011d3 | 180 | while (extint_is_syncing()) { |
sahilmgandhi | 18:6a4db94011d3 | 181 | /* Wait for all hardware modules to complete synchronization */ |
sahilmgandhi | 18:6a4db94011d3 | 182 | } |
sahilmgandhi | 18:6a4db94011d3 | 183 | } |
sahilmgandhi | 18:6a4db94011d3 | 184 | |
sahilmgandhi | 18:6a4db94011d3 | 185 | /** |
sahilmgandhi | 18:6a4db94011d3 | 186 | * \internal |
sahilmgandhi | 18:6a4db94011d3 | 187 | * \brief Disables the External Interrupt driver. |
sahilmgandhi | 18:6a4db94011d3 | 188 | * |
sahilmgandhi | 18:6a4db94011d3 | 189 | * Disables EIC modules that were previously started via a call to |
sahilmgandhi | 18:6a4db94011d3 | 190 | * \ref _extint_enable(). |
sahilmgandhi | 18:6a4db94011d3 | 191 | * Registered callback list will not be affected if callback mode is used. |
sahilmgandhi | 18:6a4db94011d3 | 192 | */ |
sahilmgandhi | 18:6a4db94011d3 | 193 | void _extint_disable(void) |
sahilmgandhi | 18:6a4db94011d3 | 194 | { |
sahilmgandhi | 18:6a4db94011d3 | 195 | Eic *const eics[EIC_INST_NUM] = EIC_INSTS; |
sahilmgandhi | 18:6a4db94011d3 | 196 | |
sahilmgandhi | 18:6a4db94011d3 | 197 | /* Disable all EIC hardware modules. */ |
sahilmgandhi | 18:6a4db94011d3 | 198 | for (uint32_t i = 0; i < EIC_INST_NUM; i++) { |
sahilmgandhi | 18:6a4db94011d3 | 199 | eics[i]->CTRL.reg &= ~EIC_CTRL_ENABLE; |
sahilmgandhi | 18:6a4db94011d3 | 200 | } |
sahilmgandhi | 18:6a4db94011d3 | 201 | |
sahilmgandhi | 18:6a4db94011d3 | 202 | while (extint_is_syncing()) { |
sahilmgandhi | 18:6a4db94011d3 | 203 | /* Wait for all hardware modules to complete synchronization */ |
sahilmgandhi | 18:6a4db94011d3 | 204 | } |
sahilmgandhi | 18:6a4db94011d3 | 205 | } |
sahilmgandhi | 18:6a4db94011d3 | 206 | |
sahilmgandhi | 18:6a4db94011d3 | 207 | /** |
sahilmgandhi | 18:6a4db94011d3 | 208 | * \brief Initializes an External Interrupt channel configuration structure to defaults. |
sahilmgandhi | 18:6a4db94011d3 | 209 | * |
sahilmgandhi | 18:6a4db94011d3 | 210 | * Initializes a given External Interrupt channel configuration structure to a |
sahilmgandhi | 18:6a4db94011d3 | 211 | * set of known default values. This function should be called on all new |
sahilmgandhi | 18:6a4db94011d3 | 212 | * instances of these configuration structures before being modified by the |
sahilmgandhi | 18:6a4db94011d3 | 213 | * user application. |
sahilmgandhi | 18:6a4db94011d3 | 214 | * |
sahilmgandhi | 18:6a4db94011d3 | 215 | * The default configuration is as follows: |
sahilmgandhi | 18:6a4db94011d3 | 216 | * \li Wake the device if an edge detection occurs whilst in sleep |
sahilmgandhi | 18:6a4db94011d3 | 217 | * \li Input filtering disabled |
sahilmgandhi | 18:6a4db94011d3 | 218 | * \li Internal pull-up enabled |
sahilmgandhi | 18:6a4db94011d3 | 219 | * \li Detect falling edges of a signal |
sahilmgandhi | 18:6a4db94011d3 | 220 | * |
sahilmgandhi | 18:6a4db94011d3 | 221 | * \param[out] config Configuration structure to initialize to default values |
sahilmgandhi | 18:6a4db94011d3 | 222 | */ |
sahilmgandhi | 18:6a4db94011d3 | 223 | void extint_chan_get_config_defaults( |
sahilmgandhi | 18:6a4db94011d3 | 224 | struct extint_chan_conf *const config) |
sahilmgandhi | 18:6a4db94011d3 | 225 | { |
sahilmgandhi | 18:6a4db94011d3 | 226 | /* Sanity check arguments */ |
sahilmgandhi | 18:6a4db94011d3 | 227 | Assert(config); |
sahilmgandhi | 18:6a4db94011d3 | 228 | |
sahilmgandhi | 18:6a4db94011d3 | 229 | /* Default configuration values */ |
sahilmgandhi | 18:6a4db94011d3 | 230 | config->gpio_pin = 0; |
sahilmgandhi | 18:6a4db94011d3 | 231 | config->gpio_pin_mux = 0; |
sahilmgandhi | 18:6a4db94011d3 | 232 | config->gpio_pin_pull = EXTINT_PULL_UP; |
sahilmgandhi | 18:6a4db94011d3 | 233 | config->wake_if_sleeping = true; |
sahilmgandhi | 18:6a4db94011d3 | 234 | config->filter_input_signal = false; |
sahilmgandhi | 18:6a4db94011d3 | 235 | config->detection_criteria = EXTINT_DETECT_FALLING; |
sahilmgandhi | 18:6a4db94011d3 | 236 | } |
sahilmgandhi | 18:6a4db94011d3 | 237 | |
sahilmgandhi | 18:6a4db94011d3 | 238 | /** |
sahilmgandhi | 18:6a4db94011d3 | 239 | * \brief Writes an External Interrupt channel configuration to the hardware module. |
sahilmgandhi | 18:6a4db94011d3 | 240 | * |
sahilmgandhi | 18:6a4db94011d3 | 241 | * Writes out a given configuration of an External Interrupt channel |
sahilmgandhi | 18:6a4db94011d3 | 242 | * configuration to the hardware module. If the channel is already configured, |
sahilmgandhi | 18:6a4db94011d3 | 243 | * the new configuration will replace the existing one. |
sahilmgandhi | 18:6a4db94011d3 | 244 | * |
sahilmgandhi | 18:6a4db94011d3 | 245 | * \param[in] channel External Interrupt channel to configure |
sahilmgandhi | 18:6a4db94011d3 | 246 | * \param[in] config Configuration settings for the channel |
sahilmgandhi | 18:6a4db94011d3 | 247 | |
sahilmgandhi | 18:6a4db94011d3 | 248 | */ |
sahilmgandhi | 18:6a4db94011d3 | 249 | void extint_chan_set_config( |
sahilmgandhi | 18:6a4db94011d3 | 250 | const uint8_t channel, |
sahilmgandhi | 18:6a4db94011d3 | 251 | const struct extint_chan_conf *const config) |
sahilmgandhi | 18:6a4db94011d3 | 252 | { |
sahilmgandhi | 18:6a4db94011d3 | 253 | /* Sanity check arguments */ |
sahilmgandhi | 18:6a4db94011d3 | 254 | Assert(config); |
sahilmgandhi | 18:6a4db94011d3 | 255 | /* Sanity check clock requirements */ |
sahilmgandhi | 18:6a4db94011d3 | 256 | Assert(!(!system_gclk_gen_is_enabled(EXTINT_CLOCK_SOURCE) && |
sahilmgandhi | 18:6a4db94011d3 | 257 | _extint_is_gclk_required(config->filter_input_signal, |
sahilmgandhi | 18:6a4db94011d3 | 258 | config->detection_criteria))); |
sahilmgandhi | 18:6a4db94011d3 | 259 | |
sahilmgandhi | 18:6a4db94011d3 | 260 | struct system_pinmux_config pinmux_config; |
sahilmgandhi | 18:6a4db94011d3 | 261 | system_pinmux_get_config_defaults(&pinmux_config); |
sahilmgandhi | 18:6a4db94011d3 | 262 | |
sahilmgandhi | 18:6a4db94011d3 | 263 | pinmux_config.mux_position = config->gpio_pin_mux; |
sahilmgandhi | 18:6a4db94011d3 | 264 | pinmux_config.direction = SYSTEM_PINMUX_PIN_DIR_INPUT; |
sahilmgandhi | 18:6a4db94011d3 | 265 | pinmux_config.input_pull = (enum system_pinmux_pin_pull)config->gpio_pin_pull; |
sahilmgandhi | 18:6a4db94011d3 | 266 | system_pinmux_pin_set_config(config->gpio_pin, &pinmux_config); |
sahilmgandhi | 18:6a4db94011d3 | 267 | |
sahilmgandhi | 18:6a4db94011d3 | 268 | /* Get a pointer to the module hardware instance */ |
sahilmgandhi | 18:6a4db94011d3 | 269 | Eic *const EIC_module = _extint_get_eic_from_channel(channel); |
sahilmgandhi | 18:6a4db94011d3 | 270 | |
sahilmgandhi | 18:6a4db94011d3 | 271 | uint32_t config_pos = (4 * (channel % 8)); |
sahilmgandhi | 18:6a4db94011d3 | 272 | uint32_t new_config; |
sahilmgandhi | 18:6a4db94011d3 | 273 | |
sahilmgandhi | 18:6a4db94011d3 | 274 | /* Determine the channel's new edge detection configuration */ |
sahilmgandhi | 18:6a4db94011d3 | 275 | new_config = (config->detection_criteria << EIC_CONFIG_SENSE0_Pos); |
sahilmgandhi | 18:6a4db94011d3 | 276 | |
sahilmgandhi | 18:6a4db94011d3 | 277 | /* Enable the hardware signal filter if requested in the config */ |
sahilmgandhi | 18:6a4db94011d3 | 278 | if (config->filter_input_signal) { |
sahilmgandhi | 18:6a4db94011d3 | 279 | new_config |= EIC_CONFIG_FILTEN0; |
sahilmgandhi | 18:6a4db94011d3 | 280 | } |
sahilmgandhi | 18:6a4db94011d3 | 281 | |
sahilmgandhi | 18:6a4db94011d3 | 282 | /* Clear the existing and set the new channel configuration */ |
sahilmgandhi | 18:6a4db94011d3 | 283 | EIC_module->CONFIG[channel / 8].reg |
sahilmgandhi | 18:6a4db94011d3 | 284 | = (EIC_module->CONFIG[channel / 8].reg & |
sahilmgandhi | 18:6a4db94011d3 | 285 | ~((EIC_CONFIG_SENSE0_Msk | EIC_CONFIG_FILTEN0) << config_pos)) | |
sahilmgandhi | 18:6a4db94011d3 | 286 | (new_config << config_pos); |
sahilmgandhi | 18:6a4db94011d3 | 287 | |
sahilmgandhi | 18:6a4db94011d3 | 288 | /* Set the channel's new wake up mode setting */ |
sahilmgandhi | 18:6a4db94011d3 | 289 | if (config->wake_if_sleeping) { |
sahilmgandhi | 18:6a4db94011d3 | 290 | EIC_module->WAKEUP.reg |= (1UL << channel); |
sahilmgandhi | 18:6a4db94011d3 | 291 | } else { |
sahilmgandhi | 18:6a4db94011d3 | 292 | EIC_module->WAKEUP.reg &= ~(1UL << channel); |
sahilmgandhi | 18:6a4db94011d3 | 293 | } |
sahilmgandhi | 18:6a4db94011d3 | 294 | } |
sahilmgandhi | 18:6a4db94011d3 | 295 | |
sahilmgandhi | 18:6a4db94011d3 | 296 | /** |
sahilmgandhi | 18:6a4db94011d3 | 297 | * \brief Writes an External Interrupt NMI channel configuration to the hardware module. |
sahilmgandhi | 18:6a4db94011d3 | 298 | * |
sahilmgandhi | 18:6a4db94011d3 | 299 | * Writes out a given configuration of an External Interrupt NMI channel |
sahilmgandhi | 18:6a4db94011d3 | 300 | * configuration to the hardware module. If the channel is already configured, |
sahilmgandhi | 18:6a4db94011d3 | 301 | * the new configuration will replace the existing one. |
sahilmgandhi | 18:6a4db94011d3 | 302 | * |
sahilmgandhi | 18:6a4db94011d3 | 303 | * \param[in] nmi_channel External Interrupt NMI channel to configure |
sahilmgandhi | 18:6a4db94011d3 | 304 | * \param[in] config Configuration settings for the channel |
sahilmgandhi | 18:6a4db94011d3 | 305 | * |
sahilmgandhi | 18:6a4db94011d3 | 306 | * \returns Status code indicating the success or failure of the request. |
sahilmgandhi | 18:6a4db94011d3 | 307 | * \retval STATUS_OK Configuration succeeded |
sahilmgandhi | 18:6a4db94011d3 | 308 | * \retval STATUS_ERR_PIN_MUX_INVALID An invalid pinmux value was supplied |
sahilmgandhi | 18:6a4db94011d3 | 309 | * \retval STATUS_ERR_BAD_FORMAT An invalid detection mode was requested |
sahilmgandhi | 18:6a4db94011d3 | 310 | */ |
sahilmgandhi | 18:6a4db94011d3 | 311 | enum status_code extint_nmi_set_config( |
sahilmgandhi | 18:6a4db94011d3 | 312 | const uint8_t nmi_channel, |
sahilmgandhi | 18:6a4db94011d3 | 313 | const struct extint_nmi_conf *const config) |
sahilmgandhi | 18:6a4db94011d3 | 314 | { |
sahilmgandhi | 18:6a4db94011d3 | 315 | /* Sanity check arguments */ |
sahilmgandhi | 18:6a4db94011d3 | 316 | Assert(config); |
sahilmgandhi | 18:6a4db94011d3 | 317 | /* Sanity check clock requirements */ |
sahilmgandhi | 18:6a4db94011d3 | 318 | Assert(!(!system_gclk_gen_is_enabled(EXTINT_CLOCK_SOURCE) && |
sahilmgandhi | 18:6a4db94011d3 | 319 | _extint_is_gclk_required(config->filter_input_signal, |
sahilmgandhi | 18:6a4db94011d3 | 320 | config->detection_criteria))); |
sahilmgandhi | 18:6a4db94011d3 | 321 | |
sahilmgandhi | 18:6a4db94011d3 | 322 | struct system_pinmux_config pinmux_config; |
sahilmgandhi | 18:6a4db94011d3 | 323 | system_pinmux_get_config_defaults(&pinmux_config); |
sahilmgandhi | 18:6a4db94011d3 | 324 | |
sahilmgandhi | 18:6a4db94011d3 | 325 | pinmux_config.mux_position = config->gpio_pin_mux; |
sahilmgandhi | 18:6a4db94011d3 | 326 | pinmux_config.direction = SYSTEM_PINMUX_PIN_DIR_INPUT; |
sahilmgandhi | 18:6a4db94011d3 | 327 | pinmux_config.input_pull = SYSTEM_PINMUX_PIN_PULL_UP; |
sahilmgandhi | 18:6a4db94011d3 | 328 | pinmux_config.input_pull = (enum system_pinmux_pin_pull)config->gpio_pin_pull; |
sahilmgandhi | 18:6a4db94011d3 | 329 | system_pinmux_pin_set_config(config->gpio_pin, &pinmux_config); |
sahilmgandhi | 18:6a4db94011d3 | 330 | |
sahilmgandhi | 18:6a4db94011d3 | 331 | /* Get a pointer to the module hardware instance */ |
sahilmgandhi | 18:6a4db94011d3 | 332 | Eic *const EIC_module = _extint_get_eic_from_channel(nmi_channel); |
sahilmgandhi | 18:6a4db94011d3 | 333 | |
sahilmgandhi | 18:6a4db94011d3 | 334 | uint32_t new_config; |
sahilmgandhi | 18:6a4db94011d3 | 335 | |
sahilmgandhi | 18:6a4db94011d3 | 336 | /* Determine the NMI's new edge detection configuration */ |
sahilmgandhi | 18:6a4db94011d3 | 337 | new_config = (config->detection_criteria << EIC_NMICTRL_NMISENSE_Pos); |
sahilmgandhi | 18:6a4db94011d3 | 338 | |
sahilmgandhi | 18:6a4db94011d3 | 339 | /* Enable the hardware signal filter if requested in the config */ |
sahilmgandhi | 18:6a4db94011d3 | 340 | if (config->filter_input_signal) { |
sahilmgandhi | 18:6a4db94011d3 | 341 | new_config |= EIC_NMICTRL_NMIFILTEN; |
sahilmgandhi | 18:6a4db94011d3 | 342 | } |
sahilmgandhi | 18:6a4db94011d3 | 343 | |
sahilmgandhi | 18:6a4db94011d3 | 344 | /* Disable EIC and general clock to configure NMI */ |
sahilmgandhi | 18:6a4db94011d3 | 345 | _extint_disable(); |
sahilmgandhi | 18:6a4db94011d3 | 346 | system_gclk_chan_disable(EIC_GCLK_ID); |
sahilmgandhi | 18:6a4db94011d3 | 347 | |
sahilmgandhi | 18:6a4db94011d3 | 348 | EIC_module->NMICTRL.reg = new_config; |
sahilmgandhi | 18:6a4db94011d3 | 349 | |
sahilmgandhi | 18:6a4db94011d3 | 350 | /* Enable the general clock and EIC after configure NMI */ |
sahilmgandhi | 18:6a4db94011d3 | 351 | system_gclk_chan_enable(EIC_GCLK_ID); |
sahilmgandhi | 18:6a4db94011d3 | 352 | _extint_enable(); |
sahilmgandhi | 18:6a4db94011d3 | 353 | |
sahilmgandhi | 18:6a4db94011d3 | 354 | return STATUS_OK; |
sahilmgandhi | 18:6a4db94011d3 | 355 | } |
sahilmgandhi | 18:6a4db94011d3 | 356 | |
sahilmgandhi | 18:6a4db94011d3 | 357 | /** |
sahilmgandhi | 18:6a4db94011d3 | 358 | * \brief Enables an External Interrupt event output. |
sahilmgandhi | 18:6a4db94011d3 | 359 | * |
sahilmgandhi | 18:6a4db94011d3 | 360 | * Enables one or more output events from the External Interrupt module. See |
sahilmgandhi | 18:6a4db94011d3 | 361 | * \ref extint_events "here" for a list of events this module supports. |
sahilmgandhi | 18:6a4db94011d3 | 362 | * |
sahilmgandhi | 18:6a4db94011d3 | 363 | * \note Events cannot be altered while the module is enabled. |
sahilmgandhi | 18:6a4db94011d3 | 364 | * |
sahilmgandhi | 18:6a4db94011d3 | 365 | * \param[in] events Struct containing flags of events to enable |
sahilmgandhi | 18:6a4db94011d3 | 366 | */ |
sahilmgandhi | 18:6a4db94011d3 | 367 | void extint_enable_events( |
sahilmgandhi | 18:6a4db94011d3 | 368 | struct extint_events *const events) |
sahilmgandhi | 18:6a4db94011d3 | 369 | { |
sahilmgandhi | 18:6a4db94011d3 | 370 | /* Sanity check arguments */ |
sahilmgandhi | 18:6a4db94011d3 | 371 | Assert(events); |
sahilmgandhi | 18:6a4db94011d3 | 372 | |
sahilmgandhi | 18:6a4db94011d3 | 373 | /* Array of available EICs. */ |
sahilmgandhi | 18:6a4db94011d3 | 374 | Eic *const eics[EIC_INST_NUM] = EIC_INSTS; |
sahilmgandhi | 18:6a4db94011d3 | 375 | |
sahilmgandhi | 18:6a4db94011d3 | 376 | /* Update the event control register for each physical EIC instance */ |
sahilmgandhi | 18:6a4db94011d3 | 377 | for (uint32_t i = 0; i < EIC_INST_NUM; i++) { |
sahilmgandhi | 18:6a4db94011d3 | 378 | uint32_t event_mask = 0; |
sahilmgandhi | 18:6a4db94011d3 | 379 | |
sahilmgandhi | 18:6a4db94011d3 | 380 | /* Create an enable mask for the current EIC module */ |
sahilmgandhi | 18:6a4db94011d3 | 381 | for (uint32_t j = 0; j < 32; j++) { |
sahilmgandhi | 18:6a4db94011d3 | 382 | if (events->generate_event_on_detect[(32 * i) + j]) { |
sahilmgandhi | 18:6a4db94011d3 | 383 | event_mask |= (1UL << j); |
sahilmgandhi | 18:6a4db94011d3 | 384 | } |
sahilmgandhi | 18:6a4db94011d3 | 385 | } |
sahilmgandhi | 18:6a4db94011d3 | 386 | |
sahilmgandhi | 18:6a4db94011d3 | 387 | /* Enable the masked events */ |
sahilmgandhi | 18:6a4db94011d3 | 388 | eics[i]->EVCTRL.reg |= event_mask; |
sahilmgandhi | 18:6a4db94011d3 | 389 | } |
sahilmgandhi | 18:6a4db94011d3 | 390 | } |
sahilmgandhi | 18:6a4db94011d3 | 391 | |
sahilmgandhi | 18:6a4db94011d3 | 392 | /** |
sahilmgandhi | 18:6a4db94011d3 | 393 | * \brief Disables an External Interrupt event output. |
sahilmgandhi | 18:6a4db94011d3 | 394 | * |
sahilmgandhi | 18:6a4db94011d3 | 395 | * Disables one or more output events from the External Interrupt module. See |
sahilmgandhi | 18:6a4db94011d3 | 396 | * \ref extint_events "here" for a list of events this module supports. |
sahilmgandhi | 18:6a4db94011d3 | 397 | * |
sahilmgandhi | 18:6a4db94011d3 | 398 | * \note Events cannot be altered while the module is enabled. |
sahilmgandhi | 18:6a4db94011d3 | 399 | * |
sahilmgandhi | 18:6a4db94011d3 | 400 | * \param[in] events Struct containing flags of events to disable |
sahilmgandhi | 18:6a4db94011d3 | 401 | */ |
sahilmgandhi | 18:6a4db94011d3 | 402 | void extint_disable_events( |
sahilmgandhi | 18:6a4db94011d3 | 403 | struct extint_events *const events) |
sahilmgandhi | 18:6a4db94011d3 | 404 | { |
sahilmgandhi | 18:6a4db94011d3 | 405 | /* Sanity check arguments */ |
sahilmgandhi | 18:6a4db94011d3 | 406 | Assert(events); |
sahilmgandhi | 18:6a4db94011d3 | 407 | |
sahilmgandhi | 18:6a4db94011d3 | 408 | /* Array of available EICs. */ |
sahilmgandhi | 18:6a4db94011d3 | 409 | Eic *const eics[EIC_INST_NUM] = EIC_INSTS; |
sahilmgandhi | 18:6a4db94011d3 | 410 | |
sahilmgandhi | 18:6a4db94011d3 | 411 | /* Update the event control register for each physical EIC instance */ |
sahilmgandhi | 18:6a4db94011d3 | 412 | for (uint32_t i = 0; i < EIC_INST_NUM; i++) { |
sahilmgandhi | 18:6a4db94011d3 | 413 | uint32_t event_mask = 0; |
sahilmgandhi | 18:6a4db94011d3 | 414 | |
sahilmgandhi | 18:6a4db94011d3 | 415 | /* Create a disable mask for the current EIC module */ |
sahilmgandhi | 18:6a4db94011d3 | 416 | for (uint32_t j = 0; j < 32; j++) { |
sahilmgandhi | 18:6a4db94011d3 | 417 | if (events->generate_event_on_detect[(32 * i) + j]) { |
sahilmgandhi | 18:6a4db94011d3 | 418 | event_mask |= (1UL << j); |
sahilmgandhi | 18:6a4db94011d3 | 419 | } |
sahilmgandhi | 18:6a4db94011d3 | 420 | } |
sahilmgandhi | 18:6a4db94011d3 | 421 | |
sahilmgandhi | 18:6a4db94011d3 | 422 | /* Disable the masked events */ |
sahilmgandhi | 18:6a4db94011d3 | 423 | eics[i]->EVCTRL.reg &= ~event_mask; |
sahilmgandhi | 18:6a4db94011d3 | 424 | } |
sahilmgandhi | 18:6a4db94011d3 | 425 | } |