Mouse code for the MacroRat
mbed-dev/targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2015, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PC_14 = 0x2E, PC_15 = 0x2F, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, // Arduino connector namings A0 = PA_0, A1 = PA_1, A2 = PA_3, A3 = PA_4, A4 = PA_5, A5 = PA_6, A6 = PA_7, A7 = PA_2, D0 = PA_10, D1 = PA_9, D2 = PA_12, D3 = PB_0, D4 = PB_7, D5 = PB_6, D6 = PB_1, D7 = PC_14, D8 = PC_15, D9 = PA_8, D10 = PA_11, D11 = PB_5, D12 = PB_4, D13 = PB_3, // Generic signals namings LED1 = PB_3, LED2 = PB_3, LED3 = PB_3, LED4 = PB_3, SERIAL_TX = PA_2, SERIAL_RX = PA_15, USBTX = PA_2, USBRX = PA_15, I2C_SCL = PB_6, I2C_SDA = PB_7, SPI_MOSI = PB_5, SPI_MISO = PB_4, SPI_SCK = PB_3, SPI_CS = PA_11, PWM_OUT = PB_0, // Not connected NC = (int)0xFFFFFFFF } PinName; #ifdef __cplusplus } #endif #endif