Mouse code for the MacroRat
mbed-dev/targets/TARGET_NXP/TARGET_LPC43XX/TARGET_LPC4337/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 #define NO_GPIO 15 #define NO_PORT 0xFF // On the LPC43xx the MCU pin name and the GPIO pin name are not the same. // Encode SCU and GPIO offsets as a pin identifier #define MBED_PIN(group, num, port, pin) ((SCU_OFF(group,num) << 16) + GPIO_OFF(port,pin)) // Decode pin identifier into register, port and pin values #define MBED_SCU_REG(MBED_PIN) (LPC_SCU_BASE + (MBED_PIN >> 16)) #define MBED_GPIO_REG(MBED_PIN) (LPC_GPIO_PORT_BASE + 0x2000 + ((MBED_PIN >> (PORT_SHIFT - 2)) & 0x0000003C)) #define MBED_GPIO_PORT(MBED_PIN) ((MBED_PIN >> PORT_SHIFT) & 0x0000000F) #define MBED_GPIO_PIN(MBED_PIN) (MBED_PIN & 0x0000001F) typedef enum { // LPC43xx Pin Names // All pins defined. Package determines which are available. // LBGA256 TFBGA180 TFBGA100 LQFP208 LQFP144 // GPIO0 [15:0] [15:0] [15:6] [15:0] [15:0] // [4:0] // GPIO1 [15:0] [15:0] [15:0] [15:0] [15:0] // GPIO2 [15:0] [15:0] [15:0] [15:0] // GPIO3 [15:0] [15:0] [7] [15:0] [15:0] // [5:3] // [1:0] // GPIO4 [15:0] [15:0] [15:0] [11] // GPIO5 [26:0] [26:0] [11:0] [25:0] [18] // [16:0] // GPIO6 [30:0] [30:28] [30:20] // [26:25] [5:0] // GPIO7 [25:0] [4:0] [25:23] // [21:17] // --- --- --- --- --- // Total 164 117 49 131 83 // Groups 0x00 - 0x0F : Digital pins // * Digital pins support up to 8 functions // Use func=0 for GPIO0-GPIO4, func=4 for GPIO5-GPIO7 // * High-drive pins default to 4 mA but can support 8, 14, 20 mA P0_0 = MBED_PIN(0x00, 0, 0, 0), // GPIO0[0] P0_1 = MBED_PIN(0x00, 1, 0, 1), // GPIO0[1] P1_0 = MBED_PIN(0x01, 0, 0, 4), // GPIO0[4] P1_1 = MBED_PIN(0x01, 1, 0, 8), // GPIO0[8] P1_2 = MBED_PIN(0x01, 2, 0, 9), // GPIO0[9] P1_3 = MBED_PIN(0x01, 3, 0, 10), // GPIO0[10] P1_4 = MBED_PIN(0x01, 4, 0, 11), // GPIO0[11] P1_5 = MBED_PIN(0x01, 5, 1, 8), // GPIO1[8] P1_6 = MBED_PIN(0x01, 6, 1, 9), // GPIO1[9] P1_7 = MBED_PIN(0x01, 7, 1, 0), // GPIO1[0] P1_8 = MBED_PIN(0x01, 8, 1, 1), // GPIO1[1] P1_9 = MBED_PIN(0x01, 9, 1, 2), // GPIO1[2] P1_10 = MBED_PIN(0x01, 10, 1, 3), // GPIO1[3] P1_11 = MBED_PIN(0x01, 11, 1, 4), // GPIO1[4] P1_12 = MBED_PIN(0x01, 12, 1, 5), // GPIO1[5] P1_13 = MBED_PIN(0x01, 13, 1, 6), // GPIO1[6] P1_14 = MBED_PIN(0x01, 14, 1, 7), // GPIO1[7] P1_15 = MBED_PIN(0x01, 15, 0, 2), // GPIO0[2] P1_16 = MBED_PIN(0x01, 16, 0, 3), // GPIO0[3] P1_17 = MBED_PIN(0x01, 17, 0, 12), // GPIO0[12] high-drive P1_18 = MBED_PIN(0x01, 18, 0, 13), // GPIO0[13] P1_19 = MBED_PIN(0x01, 19, NO_GPIO, 0), P1_20 = MBED_PIN(0x01, 20, 0, 15), // GPIO0[15] P2_0 = MBED_PIN(0x02, 0, 5, 0), // GPIO5[0] P2_1 = MBED_PIN(0x02, 1, 5, 1), // GPIO5[1] P2_2 = MBED_PIN(0x02, 2, 5, 2), // GPIO5[2] P2_3 = MBED_PIN(0x02, 3, 5, 3), // GPIO5[3] high-drive P2_4 = MBED_PIN(0x02, 4, 5, 4), // GPIO5[4] high-drive P2_5 = MBED_PIN(0x02, 5, 5, 5), // GPIO5[5] high-drive P2_6 = MBED_PIN(0x02, 6, 5, 6), // GPIO5[6] P2_7 = MBED_PIN(0x02, 7, 0, 7), // GPIO0[7] P2_8 = MBED_PIN(0x02, 8, 5, 7), // GPIO5[7] P2_9 = MBED_PIN(0x02, 9, 1, 10), // GPIO1[10] P2_10 = MBED_PIN(0x02, 10, 0, 14), // GPIO0[14] P2_11 = MBED_PIN(0x02, 11, 1, 11), // GPIO1[11] P2_12 = MBED_PIN(0x02, 12, 1, 12), // GPIO1[12] P2_13 = MBED_PIN(0x02, 13, 1, 13), // GPIO1[13] P3_0 = MBED_PIN(0x03, 0, NO_GPIO, 0), P3_1 = MBED_PIN(0x03, 1, 5, 8), // GPIO5[8] P3_2 = MBED_PIN(0x03, 2, 5, 9), // GPIO5[9] P3_3 = MBED_PIN(0x03, 3, NO_GPIO, 0), P3_4 = MBED_PIN(0x03, 4, 1, 14), // GPIO1[14] P3_5 = MBED_PIN(0x03, 5, 1, 15), // GPIO1[15] P3_6 = MBED_PIN(0x03, 6, 0, 6), // GPIO0[6] P3_7 = MBED_PIN(0x03, 7, 5, 10), // GPIO5[10] P3_8 = MBED_PIN(0x03, 8, 5, 11), // GPIO5[11] P4_0 = MBED_PIN(0x04, 0, 2, 0), // GPIO2[0] P4_1 = MBED_PIN(0x04, 1, 2, 1), // GPIO2[1] P4_2 = MBED_PIN(0x04, 2, 2, 2), // GPIO2[2] P4_3 = MBED_PIN(0x04, 3, 2, 3), // GPIO2[3] P4_4 = MBED_PIN(0x04, 4, 2, 4), // GPIO2[4] P4_5 = MBED_PIN(0x04, 5, 2, 5), // GPIO2[5] P4_6 = MBED_PIN(0x04, 6, 2, 6), // GPIO2[6] P4_7 = MBED_PIN(0x04, 7, NO_GPIO, 0), P4_8 = MBED_PIN(0x04, 8, 5, 12), // GPIO5[12] P4_9 = MBED_PIN(0x04, 9, 5, 13), // GPIO5[13] P4_10 = MBED_PIN(0x04, 10, 5, 14), // GPIO5[14] P5_0 = MBED_PIN(0x05, 0, 2, 9), // GPIO2[9] P5_1 = MBED_PIN(0x05, 1, 2, 10), // GPIO2[10] P5_2 = MBED_PIN(0x05, 2, 2, 11), // GPIO2[11] P5_3 = MBED_PIN(0x05, 3, 2, 12), // GPIO2[12] P5_4 = MBED_PIN(0x05, 4, 2, 13), // GPIO2[13] P5_5 = MBED_PIN(0x05, 5, 2, 14), // GPIO2[14] P5_6 = MBED_PIN(0x05, 6, 2, 15), // GPIO2[15] P5_7 = MBED_PIN(0x05, 7, 2, 7), // GPIO2[7] P6_0 = MBED_PIN(0x06, 0, NO_GPIO, 0), P6_1 = MBED_PIN(0x06, 1, 3, 0), // GPIO3[0] P6_2 = MBED_PIN(0x06, 2, 3, 1), // GPIO3[1] P6_3 = MBED_PIN(0x06, 3, 3, 2), // GPIO3[2] P6_4 = MBED_PIN(0x06, 4, 3, 3), // GPIO3[3] P6_5 = MBED_PIN(0x06, 5, 3, 4), // GPIO3[4] P6_6 = MBED_PIN(0x06, 6, 0, 5), // GPIO0[5] P6_7 = MBED_PIN(0x06, 7, 5, 15), // GPIO5[15] P6_8 = MBED_PIN(0x06, 8, 5, 16), // GPIO5[16] P6_9 = MBED_PIN(0x06, 9, 3, 5), // GPIO3[5] P6_10 = MBED_PIN(0x06, 10, 3, 6), // GPIO3[6] P6_11 = MBED_PIN(0x06, 11, 3, 7), // GPIO3[7] P6_12 = MBED_PIN(0x06, 12, 2, 8), // GPIO2[8] P7_0 = MBED_PIN(0x07, 0, 3, 8), // GPIO3[8] P7_1 = MBED_PIN(0x07, 1, 3, 9), // GPIO3[9] P7_2 = MBED_PIN(0x07, 2, 3, 10), // GPIO3[10] P7_3 = MBED_PIN(0x07, 3, 3, 11), // GPIO3[11] P7_4 = MBED_PIN(0x07, 4, 3, 12), // GPIO3[12] P7_5 = MBED_PIN(0x07, 5, 3, 13), // GPIO3[13] P7_6 = MBED_PIN(0x07, 6, 3, 14), // GPIO3[14] P7_7 = MBED_PIN(0x07, 7, 3, 15), // GPIO3[15] P8_0 = MBED_PIN(0x08, 8, 4, 0), // GPIO4[0] high-drive P8_1 = MBED_PIN(0x09, 0, 4, 1), // GPIO4[1] high-drive P8_2 = MBED_PIN(0x09, 1, 4, 2), // GPIO4[2] high-drive P8_3 = MBED_PIN(0x09, 2, 4, 3), // GPIO4[3] P8_4 = MBED_PIN(0x08, 4, 4, 4), // GPIO4[4] P8_5 = MBED_PIN(0x08, 5, 4, 5), // GPIO4[5] P8_6 = MBED_PIN(0x08, 6, 4, 6), // GPIO4[6] P8_7 = MBED_PIN(0x08, 7, 4, 7), // GPIO4[7] P8_8 = MBED_PIN(0x08, 8, NO_GPIO, 0), P9_0 = MBED_PIN(0x09, 0, 4, 12), // GPIO4[12] P9_1 = MBED_PIN(0x09, 1, 4, 13), // GPIO4[13] P9_2 = MBED_PIN(0x09, 2, 4, 14), // GPIO4[14] P9_3 = MBED_PIN(0x09, 3, 4, 15), // GPIO4[15] P9_4 = MBED_PIN(0x09, 4, 5, 17), // GPIO5[17] P9_5 = MBED_PIN(0x09, 5, 5, 18), // GPIO5[18] P9_6 = MBED_PIN(0x09, 6, 4, 11), // GPIO4[11] PA_0 = MBED_PIN(0x0A, 0, NO_GPIO, 0), PA_1 = MBED_PIN(0x0A, 1, 4, 8), // GPIO4[8] high-drive PA_2 = MBED_PIN(0x0A, 2, 4, 9), // GPIO4[9] high-drive PA_3 = MBED_PIN(0x0A, 3, 4, 10), // GPIO4[10] high-drive PA_4 = MBED_PIN(0x0A, 4, 5, 19), // GPIO5[19] PB_0 = MBED_PIN(0x0B, 0, 5, 20), // GPIO5[20] PB_1 = MBED_PIN(0x0B, 1, 5, 21), // GPIO5[21] PB_2 = MBED_PIN(0x0B, 2, 5, 22), // GPIO5[22] PB_3 = MBED_PIN(0x0B, 3, 5, 23), // GPIO5[23] PB_4 = MBED_PIN(0x0B, 4, 5, 24), // GPIO5[24] PB_5 = MBED_PIN(0x0B, 5, 5, 25), // GPIO5[25] PB_6 = MBED_PIN(0x0B, 6, 5, 26), // GPIO5[26] PC_0 = MBED_PIN(0x0C, 0, NO_GPIO, 0), PC_1 = MBED_PIN(0x0C, 1, 6, 0), // GPIO6[0] PC_2 = MBED_PIN(0x0C, 2, 6, 1), // GPIO6[1] PC_3 = MBED_PIN(0x0C, 3, 6, 2), // GPIO6[2] PC_4 = MBED_PIN(0x0C, 4, 6, 3), // GPIO6[3] PC_5 = MBED_PIN(0x0C, 5, 6, 4), // GPIO6[4] PC_6 = MBED_PIN(0x0C, 6, 6, 5), // GPIO6[5] PC_7 = MBED_PIN(0x0C, 7, 6, 6), // GPIO6[6] PC_8 = MBED_PIN(0x0C, 8, 6, 7), // GPIO6[7] PC_9 = MBED_PIN(0x0C, 9, 6, 8), // GPIO6[8] PC_10 = MBED_PIN(0x0C, 10, 6, 9), // GPIO6[9] PC_11 = MBED_PIN(0x0C, 11, 6, 10), // GPIO6[10] PC_12 = MBED_PIN(0x0C, 12, 6, 11), // GPIO6[11] PC_13 = MBED_PIN(0x0C, 13, 6, 12), // GPIO6[12] PC_14 = MBED_PIN(0x0C, 14, 6, 13), // GPIO6[13] PD_0 = MBED_PIN(0x0D, 0, 6, 14), // GPIO6[14] PD_1 = MBED_PIN(0x0D, 1, 6, 15), // GPIO6[15] PD_2 = MBED_PIN(0x0D, 2, 6, 16), // GPIO6[16] PD_3 = MBED_PIN(0x0D, 3, 6, 17), // GPIO6[17] PD_4 = MBED_PIN(0x0D, 4, 6, 18), // GPIO6[18] PD_5 = MBED_PIN(0x0D, 5, 6, 19), // GPIO6[19] PD_6 = MBED_PIN(0x0D, 6, 6, 20), // GPIO6[20] PD_7 = MBED_PIN(0x0D, 7, 6, 21), // GPIO6[21] PD_8 = MBED_PIN(0x0D, 8, 6, 22), // GPIO6[22] PD_9 = MBED_PIN(0x0D, 9, 6, 23), // GPIO6[23] PD_10 = MBED_PIN(0x0D, 10, 6, 24), // GPIO6[24] PD_11 = MBED_PIN(0x0D, 11, 6, 25), // GPIO6[25] PD_12 = MBED_PIN(0x0D, 12, 6, 26), // GPIO6[26] PD_13 = MBED_PIN(0x0D, 13, 6, 27), // GPIO6[27] PD_14 = MBED_PIN(0x0D, 14, 6, 28), // GPIO6[28] PD_15 = MBED_PIN(0x0D, 15, 6, 29), // GPIO6[29] PD_16 = MBED_PIN(0x0D, 16, 6, 30), // GPIO6[30] PE_0 = MBED_PIN(0x0E, 0, 7, 0), // GPIO7[0] PE_1 = MBED_PIN(0x0E, 1, 7, 1), // GPIO7[1] PE_2 = MBED_PIN(0x0E, 2, 7, 2), // GPIO7[2] PE_3 = MBED_PIN(0x0E, 3, 7, 3), // GPIO7[3] PE_4 = MBED_PIN(0x0E, 4, 7, 4), // GPIO7[4] PE_5 = MBED_PIN(0x0E, 5, 7, 5), // GPIO7[5] PE_6 = MBED_PIN(0x0E, 6, 7, 6), // GPIO7[6] PE_7 = MBED_PIN(0x0E, 7, 7, 7), // GPIO7[7] PE_8 = MBED_PIN(0x0E, 8, 7, 8), // GPIO7[8] PE_9 = MBED_PIN(0x0E, 9, 7, 9), // GPIO7[9] PE_10 = MBED_PIN(0x0E, 10, 7, 10), // GPIO7[10] PE_11 = MBED_PIN(0x0E, 11, 7, 11), // GPIO7[11] PE_12 = MBED_PIN(0x0E, 12, 7, 12), // GPIO7[12] PE_13 = MBED_PIN(0x0E, 13, 7, 13), // GPIO7[13] PE_14 = MBED_PIN(0x0E, 14, 7, 14), // GPIO7[14] PE_15 = MBED_PIN(0x0E, 15, 7, 15), // GPIO7[15] PF_0 = MBED_PIN(0x0F, 0, NO_GPIO, 0), PF_1 = MBED_PIN(0x0F, 1, 7, 16), // GPIO7[16] PF_2 = MBED_PIN(0x0F, 2, 7, 17), // GPIO7[17] PF_3 = MBED_PIN(0x0F, 3, 7, 18), // GPIO7[18] PF_4 = MBED_PIN(0x0F, 4, NO_GPIO, 0), PF_5 = MBED_PIN(0x0F, 5, 7, 19), // GPIO7[19] PF_6 = MBED_PIN(0x0F, 6, 7, 20), // GPIO7[20] PF_7 = MBED_PIN(0x0F, 7, 7, 21), // GPIO7[21] PF_8 = MBED_PIN(0x0F, 8, 7, 22), // GPIO7[22] PF_9 = MBED_PIN(0x0F, 9, 7, 23), // GPIO7[23] PF_10 = MBED_PIN(0x0F, 10, 7, 24), // GPIO7[24] PF_11 = MBED_PIN(0x0F, 11, 7, 25), // GPIO7[25] // GPIO pins from MCU pins GPIO0_0 = P0_0, GPIO0_1 = P0_1 , GPIO0_2 = P1_15, GPIO0_3 = P1_16, GPIO0_4 = P1_0, GPIO0_5 = P6_6, GPIO0_6 = P3_6, GPIO0_7 = P2_7, GPIO0_8 = P1_1, GPIO0_9 = P1_2, GPIO0_10 = P1_3, GPIO0_11 = P1_4, GPIO0_12 = P1_17, GPIO0_13 = P1_18, GPIO0_14 = P2_10, GPIO0_15 = P1_20, GPIO1_0 = P1_7, GPIO1_1 = P1_8, GPIO1_2 = P1_9, GPIO1_3 = P1_10, GPIO1_4 = P1_11, GPIO1_5 = P1_12, GPIO1_6 = P1_13, GPIO1_7 = P1_14, GPIO1_8 = P1_5, GPIO1_9 = P1_6, GPIO1_10 = P2_9, GPIO1_11 = P2_11, GPIO1_12 = P2_12, GPIO1_13 = P2_13, GPIO1_14 = P3_4, GPIO1_15 = P3_5, GPIO2_0 = P4_0, GPIO2_1 = P4_1, GPIO2_2 = P4_2, GPIO2_3 = P4_3, GPIO2_4 = P4_4, GPIO2_5 = P4_5, GPIO2_6 = P4_6, GPIO2_7 = P5_7, GPIO2_8 = P6_12, GPIO2_9 = P5_0, GPIO2_10 = P5_1, GPIO2_11 = P5_2, GPIO2_12 = P5_3, GPIO2_13 = P5_4, GPIO2_14 = P5_5, GPIO2_15 = P5_6, GPIO3_0 = P6_1, GPIO3_1 = P6_2, GPIO3_2 = P6_3, GPIO3_3 = P6_4, GPIO3_4 = P6_5, GPIO3_5 = P6_9, GPIO3_6 = P6_10, GPIO3_7 = P6_11, GPIO3_8 = P7_0, GPIO3_9 = P7_1, GPIO3_10 = P7_2, GPIO3_11 = P7_3, GPIO3_12 = P7_4, GPIO3_13 = P7_5, GPIO3_14 = P7_6, GPIO3_15 = P7_7, GPIO4_0 = P8_0, GPIO4_1 = P8_1, GPIO4_2 = P8_2, GPIO4_3 = P8_3, GPIO4_4 = P8_4, GPIO4_5 = P8_5, GPIO4_6 = P8_6, GPIO4_7 = P8_7, GPIO4_8 = PA_1, GPIO4_9 = PA_2, GPIO4_10 = PA_3, GPIO4_11 = P9_6, GPIO4_12 = P9_0, GPIO4_13 = P9_1, GPIO4_14 = P9_2, GPIO4_15 = P9_3, GPIO5_0 = P2_0, GPIO5_1 = P2_1, GPIO5_2 = P2_2, GPIO5_3 = P2_3, GPIO5_4 = P2_4, GPIO5_5 = P2_5, GPIO5_6 = P2_6, GPIO5_7 = P2_8, GPIO5_8 = P3_1, GPIO5_9 = P3_2, GPIO5_10 = P3_7, GPIO5_11 = P3_8, GPIO5_12 = P4_8, GPIO5_13 = P4_9, GPIO5_14 = P4_10, GPIO5_15 = P6_7, GPIO5_16 = P6_8, GPIO5_17 = P9_4, GPIO5_18 = P9_5, GPIO5_19 = PA_4, GPIO5_20 = PB_0, GPIO5_21 = PB_1, GPIO5_22 = PB_2, GPIO5_23 = PB_3, GPIO5_24 = PB_4, GPIO5_25 = PB_5, GPIO5_26 = PB_6, GPIO6_0 = PC_1, GPIO6_1 = PC_2, GPIO6_2 = PC_3, GPIO6_3 = PC_4, GPIO6_4 = PC_5, GPIO6_5 = PC_6, GPIO6_6 = PC_7, GPIO6_7 = PC_8, GPIO6_8 = PC_9, GPIO6_9 = PC_10, GPIO6_10 = PC_11, GPIO6_11 = PC_12, GPIO6_12 = PC_13, GPIO6_13 = PC_14, GPIO6_14 = PD_0, GPIO6_15 = PD_1, GPIO6_16 = PD_2, GPIO6_17 = PD_3, GPIO6_18 = PD_4, GPIO6_19 = PD_5, GPIO6_20 = PD_6, GPIO6_21 = PD_7, GPIO6_22 = PD_8, GPIO6_23 = PD_9, GPIO6_24 = PD_10, GPIO6_25 = PD_11, GPIO6_26 = PD_12, GPIO6_27 = PD_13, GPIO6_28 = PD_14, GPIO6_29 = PD_15, GPIO6_30 = PD_16, GPIO7_0 = PE_0, GPIO7_1 = PE_1, GPIO7_2 = PE_2, GPIO7_3 = PE_3, GPIO7_4 = PE_4, GPIO7_5 = PE_5, GPIO7_6 = PE_5, GPIO7_7 = PE_7, GPIO7_8 = PE_8, GPIO7_9 = PE_9, GPIO7_10 = PE_10, GPIO7_11 = PE_11, GPIO7_12 = PE_12, GPIO7_13 = PE_13, GPIO7_14 = PE_14, GPIO7_15 = PE_15, GPIO7_16 = PF_1, GPIO7_17 = PF_2, GPIO7_18 = PF_3, GPIO7_19 = PF_5, GPIO7_20 = PF_6, GPIO7_21 = PF_7, GPIO7_22 = PF_8, GPIO7_23 = PF_9, GPIO7_24 = PF_10, GPIO7_25 = PF_11, // Map mbed pin names to LPC43xx board signals // Group 0x18 : CLKn pins SFP_CLK0 = MBED_PIN(0x18, 0, 0, 0), SFP_CLK1 = MBED_PIN(0x18, 1, 0, 0), SFP_CLK2 = MBED_PIN(0x18, 2, 0, 0), SFP_CLK3 = MBED_PIN(0x18, 3, 0, 0), // Group 0x19 : USB1, I2C0, ADC0, ADC1 SFP_USB1 = MBED_PIN(0x19, 0, 0, 0), SFP_I2C0 = MBED_PIN(0x19, 1, 0, 0), SFP_AIO0 = MBED_PIN(0x19, 2, 0, 0), // ADC0 function select register SFP_AIO1 = MBED_PIN(0x19, 3, 0, 0), // ADC1 function select register SFP_AIO2 = MBED_PIN(0x19, 4, 0, 0), // Analog function select register SFP_EMCD = MBED_PIN(0x1A, 0, 0, 0), // EMC clock delay register SFP_INS0 = MBED_PIN(0x1C, 0, 0, 0), // Interrupt select for pin interrupts 0 to 3 SFP_INS1 = MBED_PIN(0x1C, 1, 0, 0), // Interrupt select for pin interrupts 4 to 7 // Dedicated pin (no GPIO) P_DED = MBED_PIN(0, 0, NO_GPIO, 0), // Not connected NC = (int)0xFFFFFFFF, // ---------- LPCXpresso 4337 pins ---------- D0 = P2_11, D1 = P2_10, D2 = P2_13, D3 = P1_8, D4 = P2_2, D5 = P1_7, D6 = P2_9, D7 = P2_12, D8 = P2_6, D9 = P6_5, D10 = P1_5, D11 = P1_4, D12 = P1_3, D13 = PF_4, D14 = P2_3, D15 = P2_4, SDA = P2_3, SCL = P2_4, A0 = P4_3, A1 = P4_1, A2 = PF_8, A3 = P7_5, A4 = NC, A5 = P2_5, LED_GREEN = P2_7, LED_RED = P6_11, LED_BLUE = P6_9, // Serial pins UART0_TX = P6_4, UART0_RX = P2_1, UART1_TX = D1, UART1_RX = D0, USBTX = UART0_TX, USBRX = UART0_RX, I2C_SDA = SDA, I2C_SDL = SCL, LED1 = LED_RED, LED2 = LED_BLUE, LED3 = LED_GREEN, LED4 = LED_RED, // Analog Only pins adc0_0 = MBED_PIN(NO_PORT, 0, NO_GPIO, 0), adc0_1 = MBED_PIN(NO_PORT, 1, NO_GPIO, 0), adc0_2 = MBED_PIN(NO_PORT, 2, NO_GPIO, 0), adc0_3 = MBED_PIN(NO_PORT, 3, NO_GPIO, 0), adc0_4 = MBED_PIN(NO_PORT, 4, NO_GPIO, 0), adc0_5 = MBED_PIN(NO_PORT, 5, NO_GPIO, 0), adc0_6 = MBED_PIN(NO_PORT, 6, NO_GPIO, 0), adc0_7 = MBED_PIN(NO_PORT, 7, NO_GPIO, 0), adc1_0 = MBED_PIN(NO_PORT, 8, NO_GPIO, 0), adc1_1 = MBED_PIN(NO_PORT, 9, NO_GPIO, 0), adc1_2 = MBED_PIN(NO_PORT, 10, NO_GPIO, 0), adc1_3 = MBED_PIN(NO_PORT, 11, NO_GPIO, 0), adc1_4 = MBED_PIN(NO_PORT, 12, NO_GPIO, 0), adc1_5 = MBED_PIN(NO_PORT, 13, NO_GPIO, 0), adc1_6 = MBED_PIN(NO_PORT, 14, NO_GPIO, 0), adc1_7 = MBED_PIN(NO_PORT, 15, NO_GPIO, 0), // ---------- End of LPCXpresso 4337 pins ---------- } PinName; typedef enum { PullUp = 0, PullDown = 3, PullNone = 2, Repeater = 1, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif