Mouse code for the MacroRat
mbed-dev/targets/TARGET_NXP/TARGET_LPC15XX/device/TOOLCHAIN_GCC_ARM/startup_LPC15xx.S
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* File: startup_ARMCM3.s * Purpose: startup file for Cortex-M3/M4 devices. Should use with * GNU Tools for ARM Embedded Processors * Version: V1.1 * Date: 17 June 2011 * * Copyright (C) 2011 ARM Limited. All rights reserved. * ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4 * processor based microcontrollers. This file can be freely distributed * within development tools that are supporting such ARM based processors. * * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. */ .syntax unified .arch armv7-m /* Memory Model The HEAP starts at the end of the DATA section and grows upward. The STACK starts at the end of the RAM and grows downward. The HEAP and stack STACK are only checked at compile time: (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE This is just a check for the bare minimum for the Heap+Stack area before aborting compilation, it is not the run time limit: Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100 */ .section .stack .align 3 #ifdef __STACK_SIZE .equ Stack_Size, __STACK_SIZE #else .equ Stack_Size, 0xc00 #endif .globl __StackTop .globl __StackLimit __StackLimit: .space Stack_Size .size __StackLimit, . - __StackLimit __StackTop: .size __StackTop, . - __StackTop .section .heap .align 3 #ifdef __HEAP_SIZE .equ Heap_Size, __HEAP_SIZE #else .equ Heap_Size, 0x800 #endif .globl __HeapBase .globl __HeapLimit __HeapBase: .space Heap_Size .size __HeapBase, . - __HeapBase __HeapLimit: .size __HeapLimit, . - __HeapLimit .section .isr_vector .align 2 .globl __isr_vector __isr_vector: .long __StackTop /* Top of Stack */ .long Reset_Handler /* Reset Handler */ .long NMI_Handler /* NMI Handler */ .long HardFault_Handler /* Hard Fault Handler */ .long MemManage_Handler /* MPU Fault Handler */ .long BusFault_Handler /* Bus Fault Handler */ .long UsageFault_Handler /* Usage Fault Handler */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long 0 /* Reserved */ .long SVC_Handler /* SVCall Handler */ .long DebugMon_Handler /* Debug Monitor Handler */ .long 0 /* Reserved */ .long PendSV_Handler /* PendSV Handler */ .long SysTick_Handler /* SysTick Handler */ /* External interrupts */ .long WDT_IRQHandler /* 0: Windowed watchdog timer */ .long BOD_IRQHandler /* 1: Brown-Out Detect */ .long FMC_IRQHandler /* 2: Flash controller */ .long EEPROM_IRQHandler /* 3: EEPROM controller */ .long DMA_IRQHandler /* 4: DMA */ .long GINT0_IRQHandler /* 5: GPIO group 0 */ .long GINT1_IRQHandler /* 6: GPIO group 1 */ .long PIN_INT0_IRQHandler /* 7: PIO INT0 */ .long PIN_INT1_IRQHandler /* 8: PIO INT1 */ .long PIN_INT2_IRQHandler /* 9: PIO INT2 */ .long PIN_INT3_IRQHandler /* 10: PIO INT3 */ .long PIN_INT4_IRQHandler /* 11: PIO INT4 */ .long PIN_INT5_IRQHandler /* 12: PIO INT5 */ .long PIN_INT6_IRQHandler /* 13: PIO INT6 */ .long PIN_INT7_IRQHandler /* 14: PIO INT7 */ .long RIT_IRQHandler /* 15: Repetitive Interrupt Timer */ .long SCT0_IRQHandler /* 16: State configurable timer */ .long SCT1_IRQHandler /* 17: State configurable timer */ .long SCT2_IRQHandler /* 18: State configurable timer */ .long SCT3_IRQHandler /* 19: State configurable timer */ .long MRT_IRQHandler /* 20: Multi-Rate Timer */ .long UART0_IRQHandler /* 21: UART0 */ .long UART1_IRQHandler /* 22: UART1 */ .long UART2_IRQHandler /* 23: UART2 */ .long I2C0_IRQHandler /* 24: I2C0 controller */ .long SPI0_IRQHandler /* 25: SPI0 controller */ .long SPI1_IRQHandler /* 26: SPI1 controller */ .long CAN_IRQHandler /* 27: C_CAN0 */ .long USB_IRQHandler /* 28: USB IRQ */ .long USB_FIQHandler /* 29: USB FIQ */ .long USBWakeup_IRQHandler /* 30: USB wake-up */ .long ADC0A_IRQHandler /* 31: ADC0 sequence A completion */ .long ADC0B_IRQHandler /* 32: ADC0 sequence B completion */ .long ADC0_THCMP_IRQHandler /* 33: ADC0 threshold compare */ .long ADC0_OVR_IRQHandler /* 34: ADC0 overrun */ .long ADC1A_IRQHandler /* 35: ADC1 sequence A completion */ .long ADC1B_IRQHandler /* 36: ADC1 sequence B completion */ .long ADC1_THCMP_IRQHandler /* 37: ADC1 threshold compare */ .long ADC1_OVR_IRQHandler /* 38: ADC1 overrun */ .long DAC_IRQHandler /* 39: DAC */ .long ACMP0_IRQHandler /* 40: Analog Comparator 0 */ .long ACMP1_IRQHandler /* 41: Analog Comparator 1 */ .long ACMP2_IRQHandler /* 42: Analog Comparator 2 */ .long ACMP3_IRQHandler /* 43: Analog Comparator 3 */ .long QEI_IRQHandler /* 44: Quadrature Encoder Interface */ .long RTC_ALARM_IRQHandler /* 45: RTC alarm */ .long RTC_WAKE_IRQHandler /* 46: RTC wake-up */ .size __isr_vector, . - __isr_vector .text .thumb .thumb_func .align 2 .globl Reset_Handler .type Reset_Handler, %function Reset_Handler: /* Loop to copy data from read only memory to RAM. The ranges * of copy from/to are specified by following symbols evaluated in * linker script. * _etext: End of code section, i.e., begin of data sections to copy from. * __data_start__/__data_end__: RAM address range that data should be * copied to. Both must be aligned to 4 bytes boundary. */ ldr r1, =__etext ldr r2, =__data_start__ ldr r3, =__data_end__ .Lflash_to_ram_loop: cmp r2, r3 ittt lt ldrlt r0, [r1], #4 strlt r0, [r2], #4 blt .Lflash_to_ram_loop ldr r0, =SystemInit blx r0 ldr r0, =_start bx r0 .pool .size Reset_Handler, . - Reset_Handler .text /* Macro to define default handlers. Default handler * will be weak symbol and just dead loops. They can be * overwritten by other handlers */ .macro def_default_handler handler_name .align 1 .thumb_func .weak \handler_name .type \handler_name, %function \handler_name : b . .size \handler_name, . - \handler_name .endm def_default_handler NMI_Handler def_default_handler HardFault_Handler def_default_handler MemManage_Handler def_default_handler BusFault_Handler def_default_handler UsageFault_Handler def_default_handler SVC_Handler def_default_handler DebugMon_Handler def_default_handler PendSV_Handler def_default_handler SysTick_Handler def_default_handler Default_Handler .macro def_irq_default_handler handler_name .weak \handler_name .set \handler_name, Default_Handler .endm def_irq_default_handler WDT_IRQHandler def_irq_default_handler BOD_IRQHandler def_irq_default_handler FMC_IRQHandler def_irq_default_handler EEPROM_IRQHandler def_irq_default_handler DMA_IRQHandler def_irq_default_handler GINT0_IRQHandler def_irq_default_handler GINT1_IRQHandler def_irq_default_handler PIN_INT0_IRQHandler def_irq_default_handler PIN_INT1_IRQHandler def_irq_default_handler PIN_INT2_IRQHandler def_irq_default_handler PIN_INT3_IRQHandler def_irq_default_handler PIN_INT4_IRQHandler def_irq_default_handler PIN_INT5_IRQHandler def_irq_default_handler PIN_INT6_IRQHandler def_irq_default_handler PIN_INT7_IRQHandler def_irq_default_handler RIT_IRQHandler def_irq_default_handler SCT0_IRQHandler def_irq_default_handler SCT1_IRQHandler def_irq_default_handler SCT2_IRQHandler def_irq_default_handler SCT3_IRQHandler def_irq_default_handler MRT_IRQHandler def_irq_default_handler UART0_IRQHandler def_irq_default_handler UART1_IRQHandler def_irq_default_handler UART2_IRQHandler def_irq_default_handler I2C0_IRQHandler def_irq_default_handler SPI0_IRQHandler def_irq_default_handler SPI1_IRQHandler def_irq_default_handler CAN_IRQHandler def_irq_default_handler USB_IRQHandler def_irq_default_handler USB_FIQHandler def_irq_default_handler USBWakeup_IRQHandler def_irq_default_handler ADC0A_IRQHandler def_irq_default_handler ADC0B_IRQHandler def_irq_default_handler ADC0_THCMP_IRQHandler def_irq_default_handler ADC0_OVR_IRQHandler def_irq_default_handler ADC1A_IRQHandler def_irq_default_handler ADC1B_IRQHandler def_irq_default_handler ADC1_THCMP_IRQHandler def_irq_default_handler ADC1_OVR_IRQHandler def_irq_default_handler DAC_IRQHandler def_irq_default_handler ACMP0_IRQHandler def_irq_default_handler ACMP1_IRQHandler def_irq_default_handler ACMP2_IRQHandler def_irq_default_handler ACMP3_IRQHandler def_irq_default_handler QEI_IRQHandler def_irq_default_handler RTC_ALARM_IRQHandler def_irq_default_handler RTC_WAKE_IRQHandler def_irq_default_handler DEF_IRQHandler .end