Mouse code for the MacroRat
mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_sc.c
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/**************************************************************************//** * @file sc.c * @version V1.00 * $Revision: 6 $ * $Date: 14/08/12 7:25p $ * @brief NUC472/NUC442 Smartcard(SC) driver source file * * @note * Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #include "NUC472_442.h" // Below are variables used locally by SC driver and does not want to parse by doxygen unless HIDDEN_SYMBOLS is defined /// @cond HIDDEN_SYMBOLS static uint32_t u32CardStateIgnore[SC_INTERFACE_NUM] = {0, 0, 0, 0, 0, 0}; /// @endcond HIDDEN_SYMBOLS /** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver @{ */ /** @addtogroup NUC472_442_SC_Driver SC Driver @{ */ /** @addtogroup NUC472_442_SC_EXPORTED_FUNCTIONS SC Exported Functions @{ */ /** * @brief This function indicates specified smartcard slot status * @param[in] sc Base address of smartcard module * @return Card insert status * @retval TRUE Card insert * @retval FALSE Card remove */ uint32_t SC_IsCardInserted(SC_T *sc) { // put conditions into two variable to remove IAR compilation warning uint32_t cond1 = ((sc->STATUS & SC_STATUS_CDPINSTS_Msk) >> SC_STATUS_CDPINSTS_Pos); uint32_t cond2 = ((sc->CTL & SC_CTL_CDLV_Msk) >> SC_CTL_CDLV_Pos); if(sc == SC0 && u32CardStateIgnore[0] == 1) return TRUE; else if(sc == SC1 && u32CardStateIgnore[1] == 1) return TRUE; else if(sc == SC2 && u32CardStateIgnore[2] == 1) return TRUE; else if(sc == SC3 && u32CardStateIgnore[3] == 1) return TRUE; else if(sc == SC4 && u32CardStateIgnore[4] == 1) return TRUE; else if(sc == SC5 && u32CardStateIgnore[5] == 1) return TRUE; else if(cond1 != cond2) return FALSE; else return TRUE; } /** * @brief This function reset both transmit and receive FIFO of specified smartcard module * @param[in] sc Base address of smartcard module * @return None */ void SC_ClearFIFO(SC_T *sc) { sc->ALTCTL |= (SC_ALTCTL_TXRST_Msk | SC_ALTCTL_RXRST_Msk); } /** * @brief This function disable specified smartcard module * @param[in] sc Base address of smartcard module * @return None */ void SC_Close(SC_T *sc) { sc->INTEN = 0; while(sc->PINCTL & SC_PINCTL_SYNC_Msk); sc->PINCTL = 0; sc->ALTCTL = 0; while(sc->CTL & SC_CTL_SYNC_Msk); sc->CTL = 0; } /** * @brief This function initialized smartcard module * @param[in] sc Base address of smartcard module * @param[in] u32CD Card detect polarity, select the CD pin state which indicates card insert. Could be * -\ref SC_PIN_STATE_HIGH * -\ref SC_PIN_STATE_LOW * -\ref SC_PIN_STATE_IGNORE, no card detect pin, always assumes card present * @param[in] u32PWR Power on polarity, select the PWR pin state which could set smartcard VCC to high level. Could be * -\ref SC_PIN_STATE_HIGH * -\ref SC_PIN_STATE_LOW * @return None */ void SC_Open(SC_T *sc, uint32_t u32CD, uint32_t u32PWR) { uint32_t u32Reg = 0, u32Intf; if(sc == SC0) u32Intf = 0; else if(sc == SC1) u32Intf = 1; else if(sc == SC2) u32Intf = 2; else if(sc == SC3) u32Intf = 3; else if(sc == SC4) u32Intf = 4; else u32Intf = 5; if(u32CD != SC_PIN_STATE_IGNORE) { u32Reg = u32CD ? 0: SC_CTL_CDLV_Msk; u32CardStateIgnore[u32Intf] = 0; } else { u32CardStateIgnore[u32Intf] = 1; } sc->PINCTL = u32PWR ? 0 : SC_PINCTL_PWRINV_Msk; while(sc->CTL & SC_CTL_SYNC_Msk); sc->CTL = SC_CTL_SCEN_Msk | u32Reg; } /** * @brief This function reset specified smartcard module to its default state for activate smartcard * @param[in] sc Base address of smartcard module * @return None */ void SC_ResetReader(SC_T *sc) { uint32_t u32Intf; if(sc == SC0) u32Intf = 0; else if(sc == SC1) u32Intf = 1; else if(sc == SC2) u32Intf = 2; else if(sc == SC3) u32Intf = 3; else if(sc == SC4) u32Intf = 4; else u32Intf = 5; // Reset FIFO, enable auto de-activation while card removal sc->ALTCTL |= (SC_ALTCTL_TXRST_Msk | SC_ALTCTL_RXRST_Msk | SC_ALTCTL_ADACEN_Msk); // Set Rx trigger level to 1 character, longest card detect debounce period, disable error retry (EMV ATR does not use error retry) while(sc->CTL & SC_CTL_SYNC_Msk); sc->CTL &= ~(SC_CTL_RXTRGLV_Msk | SC_CTL_CDDBSEL_Msk | SC_CTL_TXRTY_Msk | SC_CTL_RXRTY_Msk); // Enable auto convention, and all three smartcard internal timers sc->CTL |= SC_CTL_AUTOCEN_Msk | SC_CTL_TMRSEL_Msk; // Disable Rx timeout sc->RXTOUT = 0; // 372 clocks per ETU by default sc->ETUCTL= 371; /* Enable necessary interrupt for smartcard operation */ if(u32CardStateIgnore[u32Intf]) // Do not enable card detect interrupt if card present state ignore sc->INTEN = (SC_INTEN_RDAIEN_Msk | SC_INTEN_TERRIEN_Msk | SC_INTEN_TMR0IEN_Msk | SC_INTEN_TMR1IEN_Msk | SC_INTEN_TMR2IEN_Msk | SC_INTEN_BGTIEN_Msk | SC_INTEN_ACERRIEN_Msk); else sc->INTEN = (SC_INTEN_RDAIEN_Msk | SC_INTEN_TERRIEN_Msk | SC_INTEN_TMR0IEN_Msk | SC_INTEN_TMR1IEN_Msk | SC_INTEN_TMR2IEN_Msk | SC_INTEN_BGTIEN_Msk | SC_INTEN_CDIEN_Msk | SC_INTEN_ACERRIEN_Msk); return; } /** * @brief This function block guard time (BGT) of specified smartcard module * @param[in] sc Base address of smartcard module * @param[in] u32BGT Block guard time using ETU as unit, valid range are between 1 ~ 32 * @return None */ void SC_SetBlockGuardTime(SC_T *sc, uint32_t u32BGT) { sc->CTL = (sc->CTL & ~SC_CTL_BGT_Msk) | ((u32BGT - 1) << SC_CTL_BGT_Pos); } /** * @brief This function character guard time (CGT) of specified smartcard module * @param[in] sc Base address of smartcard module * @param[in] u32CGT Character guard time using ETU as unit, valid range are between 11 ~ 267 * @return None */ void SC_SetCharGuardTime(SC_T *sc, uint32_t u32CGT) { u32CGT -= sc->CTL & SC_CTL_NSB_Msk ? 11: 12; sc->EGT = u32CGT; } /** * @brief This function stop all smartcard timer of specified smartcard module * @param[in] sc Base address of smartcard module * @return None * @note This function stop the timers within smartcard module, \b not timer module */ void SC_StopAllTimer(SC_T *sc) { sc->ALTCTL &= ~(SC_ALTCTL_CNTEN0_Msk | SC_ALTCTL_CNTEN1_Msk | SC_ALTCTL_CNTEN2_Msk); } /** * @brief This function configure and start a smartcard timer of specified smartcard module * @param[in] sc Base address of smartcard module * @param[in] u32TimerNum Timer(s) to start. Valid values are 0, 1, 2. * @param[in] u32Mode Timer operating mode, valid values are: * - \ref SC_TMR_MODE_0 * - \ref SC_TMR_MODE_1 * - \ref SC_TMR_MODE_2 * - \ref SC_TMR_MODE_3 * - \ref SC_TMR_MODE_4 * - \ref SC_TMR_MODE_5 * - \ref SC_TMR_MODE_6 * - \ref SC_TMR_MODE_7 * - \ref SC_TMR_MODE_8 * - \ref SC_TMR_MODE_F * @param[in] u32ETUCount Timer timeout duration, ETU based. For timer 0, valid range are between 1~0x1000000ETUs. * For timer 1 and timer 2, valid range are between 1 ~ 0x100 ETUs * @return None * @note This function start the timer within smartcard module, \b not timer module * @note Depend on the timer operating mode, timer may not start counting immediately */ void SC_StartTimer(SC_T *sc, uint32_t u32TimerNum, uint32_t u32Mode, uint32_t u32ETUCount) { uint32_t reg = u32Mode | (SC_TMRCTL0_CNT_Msk & (u32ETUCount - 1)); if(u32TimerNum == 0) { sc->TMRCTL0 = reg; sc->ALTCTL |= SC_ALTCTL_CNTEN0_Msk; } else if(u32TimerNum == 1) { sc->TMRCTL1 = reg; sc->ALTCTL |= SC_ALTCTL_CNTEN1_Msk; } else { // timer 2 sc->TMRCTL2 = reg; sc->ALTCTL |= SC_ALTCTL_CNTEN2_Msk; } } /** * @brief This function stop a smartcard timer of specified smartcard module * @param[in] sc Base address of smartcard module * @param[in] u32TimerNum Timer(s) to stop. Valid values are 0, 1, 2. * @return None * @note This function stop the timer within smartcard module, \b not timer module */ void SC_StopTimer(SC_T *sc, uint32_t u32TimerNum) { if(u32TimerNum == 0) sc->ALTCTL &= ~SC_ALTCTL_CNTEN0_Msk; else if(u32TimerNum == 1) sc->ALTCTL &= ~SC_ALTCTL_CNTEN1_Msk; else // timer 2 sc->ALTCTL &= ~SC_ALTCTL_CNTEN2_Msk; } /*@}*/ /* end of group NUC472_442_SC_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group NUC472_442_SC_Driver */ /*@}*/ /* end of group NUC472_442_Device_Driver */ /*** (C) COPYRIGHT 2014 Nuvoton Technology Corp. ***/