Mouse code for the MacroRat
mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_clk.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/**************************************************************************//** * @file CLK.h * @version V1.0 * $Revision 1 $ * $Date: 15/11/19 10:06a $ * @brief NUC472/NUC442 CLK Header File * * @note * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. ******************************************************************************/ #ifndef __CLK_H__ #define __CLK_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver @{ */ /** @addtogroup NUC472_442_CLK_Driver CLK Driver @{ */ /** @addtogroup NUC472_442_CLK_EXPORTED_CONSTANTS CLK Exported Constants @{ */ #define FREQ_500MHZ 500000000 #define FREQ_250MHZ 250000000 #define FREQ_200MHZ 200000000 #define FREQ_125MHZ 125000000 #define FREQ_72MHZ 72000000 #define FREQ_50MHZ 50000000 #define FREQ_25MHZ 25000000 #define FREQ_24MHZ 24000000 #define FREQ_22MHZ 22000000 #define FREQ_32KHZ 32000 #define FREQ_10KHZ 10000 /*---------------------------------------------------------------------------------------------------------*/ /* PLLCTL constant definitions. PLL = FIN * NF / NR / NO */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_PLLCTL_PLLSRC_HIRC (0x1UL<<CLK_PLLCTL_PLLSRC_Pos) /*!< For PLL clock source is internal RC clock. 4MHz < FIN < 24MHz \hideinitializer */ #define CLK_PLLCTL_PLLSRC_HXT (0x0UL<<CLK_PLLCTL_PLLSRC_Pos) /*!< For PLL clock source is external crystal. 4MHz < FIN < 24MHz \hideinitializer */ #define CLK_PLLCTL_NR(x) (((x)-2)<<9) /*!< x must be constant and 2 <= x <= 33. 1.6MHz < FIN/NR < 15MHz \hideinitializer */ #define CLK_PLLCTL_NF(x) ((x)-2) /*!< x must be constant and 2 <= x <= 513. 100MHz < FIN*NF/NR < 200MHz. (120MHz < FIN*NF/NR < 200MHz is preferred.) \hideinitializer */ #define CLK_PLLCTL_NO_1 (0x0UL<<CLK_PLLCTL_OUTDV_Pos) /*!< For output divider is 1 \hideinitializer */ #define CLK_PLLCTL_NO_2 (0x1UL<<CLK_PLLCTL_OUTDV_Pos) /*!< For output divider is 2 \hideinitializer */ #define CLK_PLLCTL_NO_4 (0x3UL<<CLK_PLLCTL_OUTDV_Pos) /*!< For output divider is 4 \hideinitializer */ #if (__HXT == 12000000) #define CLK_PLLCTL_FOR_I2S (0xA54) /*!< Predefined PLLCTL setting for 147428571.428571Hz PLL output with 12MHz XTAL \hideinitializer */ #define CLK_PLLCTL_84MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(2) | CLK_PLLCTL_NF( 28) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 84MHz PLL output with 12MHz XTAL \hideinitializer */ #define CLK_PLLCTL_50MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(3) | CLK_PLLCTL_NF( 25) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 50MHz PLL output with 12MHz XTAL \hideinitializer */ #define CLK_PLLCTL_48MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(7) | CLK_PLLCTL_NF(112) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 48MHz PLL output with 12MHz XTAL \hideinitializer */ #define CLK_PLLCTL_36MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(7) | CLK_PLLCTL_NF( 84) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 36MHz PLL output with 12MHz XTAL \hideinitializer */ #define CLK_PLLCTL_32MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(6) | CLK_PLLCTL_NF( 64) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 32MHz PLL output with 12MHz XTAL \hideinitializer */ #define CLK_PLLCTL_24MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(2) | CLK_PLLCTL_NF( 16) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 24MHz PLL output with 12MHz XTAL \hideinitializer */ #else # error "The PLL pre-definitions are only valid when external crystal is 12MHz" #endif #define CLK_PLLCTL_50MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(13) | CLK_PLLCTL_NF( 59) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 50.1918MHz PLL output with 22.1184MHz IRC \hideinitializer */ #define CLK_PLLCTL_48MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(13) | CLK_PLLCTL_NF(113) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 48.064985MHz PLL output with 22.1184MHz IRC \hideinitializer */ #define CLK_PLLCTL_36MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(12) | CLK_PLLCTL_NF( 78) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 35.9424MHz PLL output with 22.1184MHz IRC \hideinitializer */ #define CLK_PLLCTL_32MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR( 9) | CLK_PLLCTL_NF( 52) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 31.9488MHz PLL output with 22.1184MHz IRC \hideinitializer */ #define CLK_PLLCTL_24MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR( 3) | CLK_PLLCTL_NF( 13) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 23.9616MHz PLL output with 22.1184MHz IRC \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* PLL2CTL constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_PLL2CTL_PLL2DIV(x) (((x)-1) << CLK_PLL2CTL_PLL2DIV_Pos) /*!< USBPLL clock frequency = (480 MHz) / 2 / (USB_N + 1). It could be 1~256, Max. PLL frequency :480MHz / 2 when XTL12M. \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKSEL0 constant definitions. (Write-protection) */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKSEL0_HCLKSEL_HXT (0x00UL<<CLK_CLKSEL0_HCLKSEL_Pos) /*!< Setting clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL0_HCLKSEL_LXT (0x01UL<<CLK_CLKSEL0_HCLKSEL_Pos) /*!< Setting clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL0_HCLKSEL_PLL (0x02UL<<CLK_CLKSEL0_HCLKSEL_Pos) /*!< Setting clock source as PLL output \hideinitializer */ #define CLK_CLKSEL0_HCLKSEL_LIRC (0x03UL<<CLK_CLKSEL0_HCLKSEL_Pos) /*!< Setting clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL0_HCLKSEL_PLL2 (0x04UL<<CLK_CLKSEL0_HCLKSEL_Pos) /*!< Setting clock source as USBPLL clock \hideinitializer */ #define CLK_CLKSEL0_HCLKSEL_HIRC (0x07UL<<CLK_CLKSEL0_HCLKSEL_Pos) /*!< Setting clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL0_STCLKSEL_HXT (0x00UL<<CLK_CLKSEL0_STCLKSEL_Pos) /*!< Setting clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL0_STCLKSEL_LXT (0x01UL<<CLK_CLKSEL0_STCLKSEL_Pos) /*!< Setting clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL0_STCLKSEL_HXT_DIV2 (0x02UL<<CLK_CLKSEL0_STCLKSEL_Pos) /*!< Setting clock source as external XTAL/2 \hideinitializer */ #define CLK_CLKSEL0_STCLKSEL_HCLK_DIV2 (0x03UL<<CLK_CLKSEL0_STCLKSEL_Pos) /*!< Setting clock source as HCLK/2 \hideinitializer */ #define CLK_CLKSEL0_STCLKSEL_HIRC_DIV2 (0x07UL<<CLK_CLKSEL0_STCLKSEL_Pos) /*!< Setting clock source as internal 22.1184MHz RC clock/2 \hideinitializer */ #define CLK_CLKSEL0_STCLKSEL_HCLK (0x01UL<<SysTick_CTRL_CLKSOURCE_Pos) /*!< Setting SysTick clock source as HCLK */ #define CLK_CLKSEL0_PCLKSEL_HCLK (0x00UL<<CLK_CLKSEL0_PCLKSEL_Pos) /*!< Setting clock source as HCLK \hideinitializer */ #define CLK_CLKSEL0_PCLKSEL_HCLK_DIV2 (0x01UL<<CLK_CLKSEL0_PCLKSEL_Pos) /*!< Setting clock source as HCLK/2 \hideinitializer */ #define CLK_CLKSEL0_USBHSEL_PLL (0x01UL<<CLK_CLKSEL0_USBHSEL_Pos) /*!< Setting clock source as PLL \hideinitializer */ #define CLK_CLKSEL0_USBHSEL_PLL2 (0x00UL<<CLK_CLKSEL0_USBHSEL_Pos) /*!< Setting clock source as PLL2 \hideinitializer */ #define CLK_CLKSEL0_CAPSEL_HXT (0x00UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL0_CAPSEL_PLL (0x01UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as PLL \hideinitializer */ #define CLK_CLKSEL0_CAPSEL_HCLK (0x02UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as HCLK \hideinitializer */ #define CLK_CLKSEL0_CAPSEL_HIRC (0x03UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL0_ICAPSEL_HXT (0x00UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL0_ICAPSEL_PLL (0x01UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as PLL \hideinitializer */ #define CLK_CLKSEL0_ICAPSEL_HCLK (0x02UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as HCLK \hideinitializer */ #define CLK_CLKSEL0_ICAPSEL_HIRC (0x03UL<<CLK_CLKSEL0_CAPSEL_Pos) /*!< Setting clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL0_SDHSEL_HXT (0x00UL<<CLK_CLKSEL0_SDHSEL_Pos) /*!< Setting clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL0_SDHSEL_PLL (0x01UL<<CLK_CLKSEL0_SDHSEL_Pos) /*!< Setting clock source as PLL2 \hideinitializer */ #define CLK_CLKSEL0_SDHSEL_HCLK (0x02UL<<CLK_CLKSEL0_SDHSEL_Pos) /*!< Setting clock source as HCLK \hideinitializer */ #define CLK_CLKSEL0_SDHSEL_HIRC (0x03UL<<CLK_CLKSEL0_SDHSEL_Pos) /*!< Setting clock source as internal 22.1184MHz RC clock \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKSEL1 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKSEL1_WDTSEL_HXT (0x0UL<<CLK_CLKSEL1_WDTSEL_Pos) /*!< Setting WDT clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_WDTSEL_LXT (0x1UL<<CLK_CLKSEL1_WDTSEL_Pos) /*!< Setting WDT clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL1_WDTSEL_HCLK_DIV2048 (0x2UL<<CLK_CLKSEL1_WDTSEL_Pos) /*!< Setting WDT clock source as HCLK/2048 \hideinitializer */ #define CLK_CLKSEL1_WDTSEL_LIRC (0x3UL<<CLK_CLKSEL1_WDTSEL_Pos) /*!< Setting WDT clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL1_ADCSEL_HXT (0x0UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting ADC clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_ADCSEL_PLL (0x1UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting ADC clock source as PLL \hideinitializer */ #define CLK_CLKSEL1_ADCSEL_PCLK (0x2UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting ADC clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_ADCSEL_HIRC (0x3UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting ADC clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_EADCSEL_HXT (0x0UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting EADC clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_EADCSEL_PLL (0x1UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting EADC clock source as PLL \hideinitializer */ #define CLK_CLKSEL1_EADCSEL_PCLK (0x2UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting EADC clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_EADCSEL_HIRC (0x3UL<<CLK_CLKSEL1_ADCSEL_Pos) /*!< Setting EADC clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_SPI0SEL_PLL (0x0UL<<CLK_CLKSEL1_SPI0SEL_Pos) /*!< Setting SPI0 clock source as PLL \hideinitializer */ #define CLK_CLKSEL1_SPI0SEL_PCLK (0x1UL<<CLK_CLKSEL1_SPI0SEL_Pos) /*!< Setting SPI0 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_SPI1SEL_PLL (0x0UL<<CLK_CLKSEL1_SPI1SEL_Pos) /*!< Setting SPI1 clock source as PLL \hideinitializer */ #define CLK_CLKSEL1_SPI1SEL_PCLK (0x1UL<<CLK_CLKSEL1_SPI1SEL_Pos) /*!< Setting SPI1 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_SPI2SEL_PLL (0x0UL<<CLK_CLKSEL1_SPI2SEL_Pos) /*!< Setting SPI2 clock source as PLL \hideinitializer */ #define CLK_CLKSEL1_SPI2SEL_PCLK (0x1UL<<CLK_CLKSEL1_SPI2SEL_Pos) /*!< Setting SPI2 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_SPI3SEL_PLL (0x0UL<<CLK_CLKSEL1_SPI3SEL_Pos) /*!< Setting SPI3 clock source as PLL \hideinitializer */ #define CLK_CLKSEL1_SPI3SEL_PCLK (0x1UL<<CLK_CLKSEL1_SPI3SEL_Pos) /*!< Setting SPI3 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_TMR0SEL_HXT (0x0UL<<CLK_CLKSEL1_TMR0SEL_Pos) /*!< Setting Timer 0 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_TMR0SEL_LXT (0x1UL<<CLK_CLKSEL1_TMR0SEL_Pos) /*!< Setting Timer 0 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL1_TMR0SEL_PCLK (0x2UL<<CLK_CLKSEL1_TMR0SEL_Pos) /*!< Setting Timer 0 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_TMR0SEL_EXT (0x3UL<<CLK_CLKSEL1_TMR0SEL_Pos) /*!< Setting Timer 0 clock source as external trigger \hideinitializer */ #define CLK_CLKSEL1_TMR0SEL_LIRC (0x5UL<<CLK_CLKSEL1_TMR0SEL_Pos) /*!< Setting Timer 0 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR0SEL_HIRC (0x7UL<<CLK_CLKSEL1_TMR0SEL_Pos) /*!< Setting Timer 0 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR1SEL_HXT (0x0UL<<CLK_CLKSEL1_TMR1SEL_Pos) /*!< Setting Timer 1 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_TMR1SEL_LXT (0x1UL<<CLK_CLKSEL1_TMR1SEL_Pos) /*!< Setting Timer 1 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL1_TMR1SEL_PCLK (0x2UL<<CLK_CLKSEL1_TMR1SEL_Pos) /*!< Setting Timer 1 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_TMR1SEL_EXT (0x3UL<<CLK_CLKSEL1_TMR1SEL_Pos) /*!< Setting Timer 1 clock source as external trigger \hideinitializer */ #define CLK_CLKSEL1_TMR1SEL_LIRC (0x5UL<<CLK_CLKSEL1_TMR1SEL_Pos) /*!< Setting Timer 1 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR1SEL_HIRC (0x7UL<<CLK_CLKSEL1_TMR1SEL_Pos) /*!< Setting Timer 1 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR2SEL_HXT (0x0UL<<CLK_CLKSEL1_TMR2SEL_Pos) /*!< Setting Timer 2 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_TMR2SEL_LXT (0x1UL<<CLK_CLKSEL1_TMR2SEL_Pos) /*!< Setting Timer 2 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL1_TMR2SEL_PCLK (0x2UL<<CLK_CLKSEL1_TMR2SEL_Pos) /*!< Setting Timer 2 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_TMR2SEL_EXT (0x3UL<<CLK_CLKSEL1_TMR2SEL_Pos) /*!< Setting Timer 2 clock source as external trigger \hideinitializer */ #define CLK_CLKSEL1_TMR2SEL_LIRC (0x5UL<<CLK_CLKSEL1_TMR2SEL_Pos) /*!< Setting Timer 2 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR2SEL_HIRC (0x7UL<<CLK_CLKSEL1_TMR2SEL_Pos) /*!< Setting Timer 2 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR3SEL_HXT (0x0UL<<CLK_CLKSEL1_TMR3SEL_Pos) /*!< Setting Timer 3 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_TMR3SEL_LXT (0x1UL<<CLK_CLKSEL1_TMR3SEL_Pos) /*!< Setting Timer 3 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL1_TMR3SEL_PCLK (0x2UL<<CLK_CLKSEL1_TMR3SEL_Pos) /*!< Setting Timer 3 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL1_TMR3SEL_EXT (0x3UL<<CLK_CLKSEL1_TMR3SEL_Pos) /*!< Setting Timer 3 clock source as external trigger \hideinitializer */ #define CLK_CLKSEL1_TMR3SEL_LIRC (0x5UL<<CLK_CLKSEL1_TMR3SEL_Pos) /*!< Setting Timer 3 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL1_TMR3SEL_HIRC (0x7UL<<CLK_CLKSEL1_TMR3SEL_Pos) /*!< Setting Timer 3 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_UARTSEL_HXT (0x0UL<<CLK_CLKSEL1_UARTSEL_Pos) /*!< Setting UR clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_UARTSEL_PLL (0x1UL<<CLK_CLKSEL1_UARTSEL_Pos) /*!< Setting UR clock source as external PLL \hideinitializer */ #define CLK_CLKSEL1_UARTSEL_HIRC (0x3UL<<CLK_CLKSEL1_UARTSEL_Pos) /*!< Setting UR clock source as external internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_CLKOSEL_HXT (0x0UL<<CLK_CLKSEL1_CLKOSEL_Pos) /*!< Setting CLKO clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL1_CLKOSEL_LXT (0x1UL<<CLK_CLKSEL1_CLKOSEL_Pos) /*!< Setting CLKO clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL1_CLKOSEL_HCLK (0x2UL<<CLK_CLKSEL1_CLKOSEL_Pos) /*!< Setting CLKO clock source as HCLK \hideinitializer */ #define CLK_CLKSEL1_CLKOSEL_HIRC (0x3UL<<CLK_CLKSEL1_CLKOSEL_Pos) /*!< Setting CLKO clock source as external internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL1_WWDTSEL_HCLK_DIV2048 (0x2UL<<CLK_CLKSEL1_WWDTSEL_Pos) /*!< Setting CLKO clock source as HCLK/2048 \hideinitializer */ #define CLK_CLKSEL1_WWDTSEL_LIRC (0x3UL<<CLK_CLKSEL1_WWDTSEL_Pos) /*!< Setting CLKO clock source as internal 10KHz RC clock \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKSEL2 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKSEL2_PWM0CH01SEL_HXT (0x0UL<<CLK_CLKSEL2_PWM0CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL2_PWM0CH01SEL_LXT (0x1UL<<CLK_CLKSEL2_PWM0CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL2_PWM0CH01SEL_PCLK (0x2UL<<CLK_CLKSEL2_PWM0CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL2_PWM0CH01SEL_HIRC (0x3UL<<CLK_CLKSEL2_PWM0CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM0CH01SEL_LIRC (0x7UL<<CLK_CLKSEL2_PWM0CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM0CH23SEL_HXT (0x0UL<<CLK_CLKSEL2_PWM0CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL2_PWM0CH23SEL_LXT (0x1UL<<CLK_CLKSEL2_PWM0CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL2_PWM0CH23SEL_PCLK (0x2UL<<CLK_CLKSEL2_PWM0CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL2_PWM0CH23SEL_HIRC (0x3UL<<CLK_CLKSEL2_PWM0CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM0CH23SEL_LIRC (0x7UL<<CLK_CLKSEL2_PWM0CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM0CH45SEL_HXT (0x0UL<<CLK_CLKSEL2_PWM0CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL2_PWM0CH45SEL_LXT (0x1UL<<CLK_CLKSEL2_PWM0CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL2_PWM0CH45SEL_PCLK (0x2UL<<CLK_CLKSEL2_PWM0CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL2_PWM0CH45SEL_HIRC (0x3UL<<CLK_CLKSEL2_PWM0CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM0CH45SEL_LIRC (0x7UL<<CLK_CLKSEL2_PWM0CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM1CH01SEL_HXT (0x0UL<<CLK_CLKSEL2_PWM1CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL2_PWM1CH01SEL_LXT (0x1UL<<CLK_CLKSEL2_PWM1CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL2_PWM1CH01SEL_PCLK (0x2UL<<CLK_CLKSEL2_PWM1CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL2_PWM1CH01SEL_HIRC (0x3UL<<CLK_CLKSEL2_PWM1CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM1CH01SEL_LIRC (0x7UL<<CLK_CLKSEL2_PWM1CH01SEL_Pos) /*!< Setting PWM0 and PWM1 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM1CH23SEL_HXT (0x0UL<<CLK_CLKSEL2_PWM1CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL2_PWM1CH23SEL_LXT (0x1UL<<CLK_CLKSEL2_PWM1CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL2_PWM1CH23SEL_PCLK (0x2UL<<CLK_CLKSEL2_PWM1CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL2_PWM1CH23SEL_HIRC (0x3UL<<CLK_CLKSEL2_PWM1CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM1CH23SEL_LIRC (0x7UL<<CLK_CLKSEL2_PWM1CH23SEL_Pos) /*!< Setting PWM2 and PWM3 clock source as internal 10KHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM1CH45SEL_HXT (0x0UL<<CLK_CLKSEL2_PWM1CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL2_PWM1CH45SEL_LXT (0x1UL<<CLK_CLKSEL2_PWM1CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as external XTAL 32.768KHz \hideinitializer */ #define CLK_CLKSEL2_PWM1CH45SEL_PCLK (0x2UL<<CLK_CLKSEL2_PWM1CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL2_PWM1CH45SEL_HIRC (0x3UL<<CLK_CLKSEL2_PWM1CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL2_PWM1CH45SEL_LIRC (0x7UL<<CLK_CLKSEL2_PWM1CH45SEL_Pos) /*!< Setting PWM4 and PWM5 clock source as internal 10KHz RC clock \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKSEL3 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKSEL3_SC0SEL_HXT (0x0UL<<CLK_CLKSEL3_SC0SEL_Pos) /*!< Setting SC0 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_SC0SEL_PLL (0x1UL<<CLK_CLKSEL3_SC0SEL_Pos) /*!< Setting SC0 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_SC0SEL_PCLK (0x2UL<<CLK_CLKSEL3_SC0SEL_Pos) /*!< Setting SC0 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_SC0SEL_HIRC (0x3UL<<CLK_CLKSEL3_SC0SEL_Pos) /*!< Setting SC0 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_SC1SEL_HXT (0x0UL<<CLK_CLKSEL3_SC1SEL_Pos) /*!< Setting SC1 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_SC1SEL_PLL (0x1UL<<CLK_CLKSEL3_SC1SEL_Pos) /*!< Setting SC1 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_SC1SEL_PCLK (0x2UL<<CLK_CLKSEL3_SC1SEL_Pos) /*!< Setting SC1 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_SC1SEL_HIRC (0x3UL<<CLK_CLKSEL3_SC1SEL_Pos) /*!< Setting SC1 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_SC2SEL_HXT (0x0UL<<CLK_CLKSEL3_SC2SEL_Pos) /*!< Setting SC2 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_SC2SEL_PLL (0x1UL<<CLK_CLKSEL3_SC2SEL_Pos) /*!< Setting SC2 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_SC2SEL_PCLK (0x2UL<<CLK_CLKSEL3_SC2SEL_Pos) /*!< Setting SC2 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_SC2SEL_HIRC (0x3UL<<CLK_CLKSEL3_SC2SEL_Pos) /*!< Setting SC2 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_SC3SEL_HXT (0x0UL<<CLK_CLKSEL3_SC3SEL_Pos) /*!< Setting SC3 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_SC3SEL_PLL (0x1UL<<CLK_CLKSEL3_SC3SEL_Pos) /*!< Setting SC3 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_SC3SEL_PCLK (0x2UL<<CLK_CLKSEL3_SC3SEL_Pos) /*!< Setting SC3 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_SC3SEL_HIRC (0x3UL<<CLK_CLKSEL3_SC3SEL_Pos) /*!< Setting SC3 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_SC4SEL_HXT (0x0UL<<CLK_CLKSEL3_SC4SEL_Pos) /*!< Setting SC4 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_SC4SEL_PLL (0x1UL<<CLK_CLKSEL3_SC4SEL_Pos) /*!< Setting SC4 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_SC4SEL_PCLK (0x2UL<<CLK_CLKSEL3_SC4SEL_Pos) /*!< Setting SC4 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_SC4SEL_HIRC (0x3UL<<CLK_CLKSEL3_SC4SEL_Pos) /*!< Setting SC4 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_SC5SEL_HXT (0x0UL<<CLK_CLKSEL3_SC5SEL_Pos) /*!< Setting SC5 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_SC5SEL_PLL (0x1UL<<CLK_CLKSEL3_SC5SEL_Pos) /*!< Setting SC5 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_SC5SEL_PCLK (0x2UL<<CLK_CLKSEL3_SC5SEL_Pos) /*!< Setting SC5 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_SC5SEL_HIRC (0x3UL<<CLK_CLKSEL3_SC5SEL_Pos) /*!< Setting SC5 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_I2S0SEL_HXT (0x0UL<<CLK_CLKSEL3_I2S0SEL_Pos) /*!< Setting I2S0 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_I2S0SEL_PLL (0x1UL<<CLK_CLKSEL3_I2S0SEL_Pos) /*!< Setting I2S0 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_I2S0SEL_PCLK (0x2UL<<CLK_CLKSEL3_I2S0SEL_Pos) /*!< Setting I2S0 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_I2S0SEL_HIRC (0x3UL<<CLK_CLKSEL3_I2S0SEL_Pos) /*!< Setting I2S0 clock source as internal 22.1184MHz RC clock \hideinitializer */ #define CLK_CLKSEL3_I2S1SEL_HXT (0x0UL<<CLK_CLKSEL3_I2S1SEL_Pos) /*!< Setting I2S1 clock source as external XTAL \hideinitializer */ #define CLK_CLKSEL3_I2S1SEL_PLL (0x1UL<<CLK_CLKSEL3_I2S1SEL_Pos) /*!< Setting I2S1 clock source as PLL \hideinitializer */ #define CLK_CLKSEL3_I2S1SEL_PCLK (0x2UL<<CLK_CLKSEL3_I2S1SEL_Pos) /*!< Setting I2S1 clock source as PCLK \hideinitializer */ #define CLK_CLKSEL3_I2S1SEL_HIRC (0x3UL<<CLK_CLKSEL3_I2S1SEL_Pos) /*!< Setting I2S1 clock source as internal 22.1184MHz RC clock \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKDIV0 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKDIV0_HCLK(x) (((x)-1) << CLK_CLKDIV0_HCLKDIV_Pos) /*!< CLKDIV Setting for HCLK clock divider. It could be 1~16 \hideinitializer */ #define CLK_CLKDIV0_USB(x) (((x)-1) << CLK_CLKDIV0_USBHDIV_Pos) /*!< CLKDIV Setting for USB clock divider. It could be 1~16 \hideinitializer */ #define CLK_CLKDIV0_UART(x) (((x)-1) << CLK_CLKDIV0_UARTDIV_Pos) /*!< CLKDIV Setting for UR clock divider. It could be 1~16 \hideinitializer */ #define CLK_CLKDIV0_ADC(x) (((x)-1) << CLK_CLKDIV0_ADCDIV_Pos) /*!< CLKDIV Setting for ADC clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV0_SDH(x) (((x)-1) << CLK_CLKDIV0_SDHDIV_Pos) /*!< CLKDIV Setting for SDIO clock divider. It could be 1~256 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKDIV1 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKDIV1_SC0(x) (((x)-1) << CLK_CLKDIV1_SC0DIV_Pos) /*!< CLKDIV Setting for SC0 clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV1_SC1(x) (((x)-1) << CLK_CLKDIV1_SC1DIV_Pos) /*!< CLKDIV Setting for SC1 clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV1_SC2(x) (((x)-1) << CLK_CLKDIV1_SC2DIV_Pos) /*!< CLKDIV Setting for SC2 clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV1_SC3(x) (((x)-1) << CLK_CLKDIV1_SC3DIV_Pos) /*!< CLKDIV Setting for SC3 clock divider. It could be 1~256 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKDIV2 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKDIV2_SC4(x) (((x)-1) << CLK_CLKDIV2_SC4DIV_Pos) /*!< CLKDIV Setting for SC4 clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV2_SC5(x) (((x)-1) << CLK_CLKDIV2_SC5DIV_Pos) /*!< CLKDIV Setting for SC5 clock divider. It could be 1~256 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CLKDIV3 constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define CLK_CLKDIV3_CAP(x) (((x)-1) << CLK_CLKDIV3_CAPDIV_Pos) /*!< CLKDIV Setting for CAP Engine clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV3_VSENSE(x) (((x)-1) << CLK_CLKDIV3_VSENSEDIV_Pos) /*!< CLKDIV Setting for Video Pixel clock divider. It could be 1~256 \hideinitializer */ #define CLK_CLKDIV3_EMAC(x) (((x)-1) << CLK_CLKDIV3_EMACDIV_Pos) /*!< CLKDIV Setting for EMAC_MDCLK clock divider. It could be 1~256 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* MODULE constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define MODULE_APBCLK(x) ((x >>30) & 0x3) /*!< Calculate AHBCLK/APBCLK offset on MODULE index \hideinitializer */ #define MODULE_CLKSEL(x) ((x >>28) & 0x3) /*!< Calculate CLKSEL offset on MODULE index \hideinitializer */ #define MODULE_CLKSEL_Msk(x) ((x >>25) & 0x7) /*!< Calculate CLKSEL mask offset on MODULE index \hideinitializer */ #define MODULE_CLKSEL_Pos(x) ((x >>20) & 0x1f) /*!< Calculate CLKSEL position offset on MODULE index \hideinitializer */ #define MODULE_CLKDIV(x) ((x >>18) & 0x3) /*!< Calculate APBCLK CLKDIV on MODULE index \hideinitializer */ #define MODULE_CLKDIV_Msk(x) ((x >>10) & 0xff) /*!< Calculate CLKDIV mask offset on MODULE index \hideinitializer */ #define MODULE_CLKDIV_Pos(x) ((x >>5 ) & 0x1f) /*!< Calculate CLKDIV position offset on MODULE index \hideinitializer */ #define MODULE_IP_EN_Pos(x) ((x >>0 ) & 0x1f) /*!< Calculate APBCLK offset on MODULE index \hideinitializer */ #define MODULE_NoMsk 0x0 /*!< Not mask on MODULE index \hideinitializer */ #define NA MODULE_NoMsk /*!< Not Available \hideinitializer */ #define MODULE_APBCLK_ENC(x) (((x) & 0x03) << 30) /*!< MODULE index, 0x0:AHBCLK, 0x1:APBCLK0, 0x2:APBCLK1 */ #define MODULE_CLKSEL_ENC(x) (((x) & 0x03) << 28) /*!< CLKSEL offset on MODULE index, 0x0:CLKSEL0, 0x1:CLKSEL1, 0x2:CLKSEL2, 0x3:CLKSEL3 */ #define MODULE_CLKSEL_Msk_ENC(x) (((x) & 0x07) << 25) /*!< CLKSEL mask offset on MODULE index */ #define MODULE_CLKSEL_Pos_ENC(x) (((x) & 0x1f) << 20) /*!< CLKSEL position offset on MODULE index */ #define MODULE_CLKDIV_ENC(x) (((x) & 0x03) << 18) /*!< APBCLK CLKDIV on MODULE index, 0x0:CLKDIV, 0x1:CLKDIV1 */ #define MODULE_CLKDIV_Msk_ENC(x) (((x) & 0xff) << 10) /*!< CLKDIV mask offset on MODULE index */ #define MODULE_CLKDIV_Pos_ENC(x) (((x) & 0x1f) << 5) /*!< CLKDIV position offset on MODULE index */ #define MODULE_IP_EN_Pos_ENC(x) (((x) & 0x1f) << 0) /*!< AHBCLK/APBCLK offset on MODULE index */ /*--------------------------------------------------------------------------------------------------------------------------------------*/ /* AHBCLK/APBCLK(2) | CLKSEL(2) | CLKSEL_Msk(3) | CLKSEL_Pos(5) | CLKDIV(2) | CLKDIV_Msk(8) | CLKDIV_Pos(5) | IP_EN_Pos(5)*/ /*--------------------------------------------------------------------------------------------------------------------------------------*/ #define PDMA_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_AHBCLK_PDMACKEN_Pos) /*!< PDMA Module \hideinitializer */ #define ISP_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_AHBCLK_ISPCKEN_Pos) /*!< ISP Module \hideinitializer */ #define EBI_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_AHBCLK_EBICKEN_Pos) /*!< EBI Module \hideinitializer */ #define USBH_MODULE ((0UL<<30)|(0<<28)|(1<<25) |( 8<<20)|(0<<18)|(0xF<<10) |( 4<<5)|CLK_AHBCLK_USBHCKEN_Pos) /*!< USBH Module \hideinitializer */ #define EMAC_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|(10<<20)|(3<<18)|(0xFF<<10) |(16<<5)|CLK_AHBCLK_EMACCKEN_Pos) /*!< EMAC Module \hideinitializer */ #define SDH_MODULE ((0UL<<30)|(0<<28)|(3<<25) |(20<<20)|(0<<18)|(0xFF<<10) |(24<<5)|CLK_AHBCLK_SDHCKEN_Pos) /*!< SDH Module \hideinitializer */ #define CRC_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_AHBCLK_CRCCKEN_Pos) /*!< CRC Module \hideinitializer */ #define CAP_MODULE ((0UL<<30)|(0<<28)|(3<<25) |(16<<20)|(3<<18)|(0xFF<<10) |( 0<<5)|CLK_AHBCLK_CAPCKEN_Pos) /*!< CAP Module \hideinitializer */ #define SEN_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(3<<18)|(0xFF<<10) |( 8<<5)|CLK_AHBCLK_SENCKEN_Pos) /*!< Sensor Clock Module \hideinitializer */ #define USBD_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_AHBCLK_USBDCKEN_Pos) /*!< USBD Module \hideinitializer */ #define CRPT_MODULE ((0UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_AHBCLK_CRPTCKEN_Pos) /*!< CRYPTO Module \hideinitializer */ #define WDT_MODULE ((1UL<<30)|(1<<28)|(3<<25) |( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_WDTCKEN_Pos) /*!< Watchdog Timer Module \hideinitializer */ #define WWDT_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(30<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_WDTCKEN_Pos) /*!< Window Watchdog Timer Module \hideinitializer */ #define RTC_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_RTCCKEN_Pos) /*!< RTC Module \hideinitializer */ #define TMR0_MODULE ((1UL<<30)|(1<<28)|(7<<25) |( 8<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_TMR0CKEN_Pos) /*!< Timer0 Module \hideinitializer */ #define TMR1_MODULE ((1UL<<30)|(1<<28)|(7<<25) |(12<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_TMR1CKEN_Pos) /*!< Timer1 Module \hideinitializer */ #define TMR2_MODULE ((1UL<<30)|(1<<28)|(7<<25) |(16<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_TMR2CKEN_Pos) /*!< Timer2 Module \hideinitializer */ #define TMR3_MODULE ((1UL<<30)|(1<<28)|(7<<25) |(20<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_TMR3CKEN_Pos) /*!< Timer3 Module \hideinitializer */ #define CLKO_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(28<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_CLKOCKEN_Pos) /*!< CLKO Module \hideinitializer */ #define ACMP_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_ACMPCKEN_Pos) /*!< ACMP Module \hideinitializer */ #define I2C0_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_I2C0CKEN_Pos) /*!< I2C0 Module \hideinitializer */ #define I2C1_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_I2C1CKEN_Pos) /*!< I2C1 Module \hideinitializer */ #define I2C2_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_I2C2CKEN_Pos) /*!< I2C2 Module \hideinitializer */ #define I2C3_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_I2C3CKEN_Pos) /*!< I2C3 Module \hideinitializer */ #define SPI0_MODULE ((1UL<<30)|(1<<28)|(1<<25) |( 4<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_SPI0CKEN_Pos) /*!< SPI0 Module \hideinitializer */ #define SPI1_MODULE ((1UL<<30)|(1<<28)|(1<<25) |( 5<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_SPI1CKEN_Pos) /*!< SPI1 Module \hideinitializer */ #define SPI2_MODULE ((1UL<<30)|(1<<28)|(1<<25) |( 6<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_SPI2CKEN_Pos) /*!< SPI2 Module \hideinitializer */ #define SPI3_MODULE ((1UL<<30)|(1<<28)|(1<<25) |( 7<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_SPI3CKEN_Pos) /*!< SPI3 Module \hideinitializer */ #define UART0_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(24<<20)|(0<<18)|(0xF<<10) |( 8<<5)|CLK_APBCLK0_UART0CKEN_Pos) /*!< UART0 Module \hideinitializer */ #define UART1_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(24<<20)|(0<<18)|(0xF<<10) |( 8<<5)|CLK_APBCLK0_UART1CKEN_Pos) /*!< UART1 Module \hideinitializer */ #define UART2_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(24<<20)|(0<<18)|(0xF<<10) |( 8<<5)|CLK_APBCLK0_UART2CKEN_Pos) /*!< UART2 Module \hideinitializer */ #define UART3_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(24<<20)|(0<<18)|(0xF<<10) |( 8<<5)|CLK_APBCLK0_UART3CKEN_Pos) /*!< UART3 Module \hideinitializer */ #define UART4_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(24<<20)|(0<<18)|(0xF<<10) |( 8<<5)|CLK_APBCLK0_UART4CKEN_Pos) /*!< UART4 Module \hideinitializer */ #define UART5_MODULE ((1UL<<30)|(1<<28)|(3<<25) |(24<<20)|(0<<18)|(0xF<<10) |( 8<<5)|CLK_APBCLK0_UART5CKEN_Pos) /*!< UART5 Module \hideinitializer */ #define CAN0_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_CAN0CKEN_Pos) /*!< CAN0 Module \hideinitializer */ #define CAN1_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_CAN1CKEN_Pos) /*!< CAN1 Module \hideinitializer */ #define OTG_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_OTGCKEN_Pos) /*!< OTG Module \hideinitializer */ #define ADC_MODULE ((1UL<<30)|(1<<28)|(3<<25) |( 2<<20)|(0<<18)|(0xFF<<10) |(16<<5)|CLK_APBCLK0_ADCCKEN_Pos) /*!< ADC Module \hideinitializer */ #define I2S0_MODULE ((1UL<<30)|(3<<28)|(3<<25) |(16<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_I2S0CKEN_Pos) /*!< I2S0 Module \hideinitializer */ #define I2S1_MODULE ((1UL<<30)|(3<<28)|(3<<25) |(18<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_I2S1CKEN_Pos) /*!< I2S1 Module \hideinitializer */ #define PS2_MODULE ((1UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK0_PS2CKEN_Pos) /*!< PS2 Module \hideinitializer */ #define SC0_MODULE ((2UL<<30)|(3<<28)|(3<<25) |( 0<<20)|(1<<18)|(0xFF<<10) |( 0<<5)|CLK_APBCLK1_SC0CKEN_Pos) /*!< SmartCard0 Module \hideinitializer */ #define SC1_MODULE ((2UL<<30)|(3<<28)|(3<<25) |( 2<<20)|(1<<18)|(0xFF<<10) |( 8<<5)|CLK_APBCLK1_SC1CKEN_Pos) /*!< SmartCard1 Module \hideinitializer */ #define SC2_MODULE ((2UL<<30)|(3<<28)|(3<<25) |( 4<<20)|(1<<18)|(0xFF<<10) |(16<<5)|CLK_APBCLK1_SC2CKEN_Pos) /*!< SmartCard2 Module \hideinitializer */ #define SC3_MODULE ((2UL<<30)|(3<<28)|(3<<25) |( 6<<20)|(1<<18)|(0xFF<<10) |(24<<5)|CLK_APBCLK1_SC3CKEN_Pos) /*!< SmartCard3 Module \hideinitializer */ #define SC4_MODULE ((2UL<<30)|(3<<28)|(3<<25) |( 8<<20)|(2<<18)|(0xFF<<10) |( 0<<5)|CLK_APBCLK1_SC4CKEN_Pos) /*!< SmartCard4 Module \hideinitializer */ #define SC5_MODULE ((2UL<<30)|(3<<28)|(3<<25) |(10<<20)|(2<<18)|(0xFF<<10) |( 8<<5)|CLK_APBCLK1_SC5CKEN_Pos) /*!< SmartCard5 Module \hideinitializer */ #define I2C4_MODULE ((2UL<<30)|(0<<28)|(0<<25) |( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_I2C4CKEN_Pos) /*!< I2C4 Module */ #define PWM0CH01_MODULE ((2UL<<30)|(2<<28)|(7<<25) |( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_PWM0CH01CKEN_Pos) /*!< PWM0CH01 Module \hideinitializer */ #define PWM0CH23_MODULE ((2UL<<30)|(2<<28)|(7<<25) |( 4<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_PWM0CH23CKEN_Pos) /*!< PWM0CH23 Module \hideinitializer */ #define PWM0CH45_MODULE ((2UL<<30)|(2<<28)|(7<<25) |( 8<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_PWM0CH45CKEN_Pos) /*!< PWM0CH45 Module \hideinitializer */ #define PWM1CH01_MODULE ((2UL<<30)|(2<<28)|(7<<25) |(12<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_PWM1CH01CKEN_Pos) /*!< PWM1CH01 Module \hideinitializer */ #define PWM1CH23_MODULE ((2UL<<30)|(2<<28)|(7<<25) |(16<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_PWM1CH23CKEN_Pos) /*!< PWM1CH23 Module \hideinitializer */ #define PWM1CH45_MODULE ((2UL<<30)|(2<<28)|(7<<25) |(20<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_PWM1CH45CKEN_Pos) /*!< PWM1CH45 Module \hideinitializer */ #define QEI0_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_QEI0CKEN_Pos) /*!< QEI0 Module \hideinitializer */ #define QEI1_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_QEI1CKEN_Pos) /*!< QEI1 Module \hideinitializer */ #define ECAP0_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_ECAP0CKEN_Pos) /*!< ECAP0 Module \hideinitializer */ #define ECAP1_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_ECAP1CKEN_Pos) /*!< ECAP1 Module \hideinitializer */ #define EPWM0_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_EPWM0CKEN_Pos) /*!< EPWM0 Module \hideinitializer */ #define EPWM1_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_EPWM1CKEN_Pos) /*!< EPWM1 Module \hideinitializer */ #define OPA_MODULE ((2UL<<30)|(0<<28)|(MODULE_NoMsk<<25)|( 0<<20)|(0<<18)|(MODULE_NoMsk<<10)|( 0<<5)|CLK_APBCLK1_OPACKEN_Pos) /*!< OPA Module \hideinitializer */ #define EADC_MODULE ((2UL<<30)|(1<<28)|(3<<25) |( 2<<20)|(0<<18)|(0xFF<<10) |(16<<5)|CLK_APBCLK1_EADCCKEN_Pos) /*!< EADC Module \hideinitializer */ /*@}*/ /* end of group NUC472_442_CLK_EXPORTED_CONSTANTS */ /** @addtogroup NUC472_442_CLK_EXPORTED_FUNCTIONS CLK Exported Functions @{ */ void CLK_DisableCKO(void); void CLK_EnableCKO(uint32_t u32ClkSrc, uint32_t u32ClkDiv, uint32_t u32ClkDivBy1En); void CLK_PowerDown(void); void CLK_Idle(void); uint32_t CLK_GetHXTFreq(void); uint32_t CLK_GetLXTFreq(void); uint32_t CLK_GetHCLKFreq(void); uint32_t CLK_GetPCLKFreq(void); uint32_t CLK_GetCPUFreq(void); uint32_t CLK_GetPLLClockFreq(void); uint32_t CLK_SetCoreClock(uint32_t u32Hclk); void CLK_SetHCLK(uint32_t u32ClkSrc, uint32_t u32ClkDiv); void CLK_SetModuleClock(uint32_t u32ModuleIdx, uint32_t u32ClkSrc, uint32_t u32ClkDiv); void CLK_SetSysTickClockSrc(uint32_t u32ClkSrc); void CLK_EnableXtalRC(uint32_t u32ClkMask); void CLK_DisableXtalRC(uint32_t u32ClkMask); void CLK_EnableModuleClock(uint32_t u32ModuleIdx); void CLK_DisableModuleClock(uint32_t u32ModuleIdx); uint32_t CLK_EnablePLL(uint32_t u32PllClkSrc, uint32_t u32PllFreq); void CLK_DisablePLL(void); void CLK_SysTickDelay(uint32_t us); uint32_t CLK_WaitClockReady(uint32_t u32ClkMask); void CLK_EnableSysTick(uint32_t u32ClkSrc, uint32_t u32Count); void CLK_DisableSysTick(void); /*@}*/ /* end of group NUC472_442_CLK_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group NUC472_442_CLK_Driver */ /*@}*/ /* end of group NUC472_442_Device_Driver */ #ifdef __cplusplus } #endif #endif //__CLK_H__ /*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/