Mouse code for the MacroRat
mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_can.c
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/**************************************************************************//** * @file CAN.c * @version V1.00 * $Revision: 14 $ * $Date: 14/10/06 5:38p $ * @brief NUC472/NUC442 CAN driver source file * * @note * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #include "NUC472_442.h" /** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver @{ */ /** @addtogroup NUC472_442_CAN_Driver CAN Driver @{ */ /** @addtogroup NUC472_442_CAN_EXPORTED_FUNCTIONS CAN Exported Functions @{ */ #include <stdio.h> /// @cond HIDDEN_SYMBOLS static uint32_t GetFreeIF(CAN_T *tCAN); //#define DEBUG_PRINTF printf #define DEBUG_PRINTF(...) /** * @brief Check if SmartCard slot is presented. * @param[in] tCAN The base address of can module. * @retval 0 IF0 is free * @retval 1 IF1 is free * @retval 2 No IF is free * @details Search the first free message interface, starting from 0. */ static uint32_t GetFreeIF(CAN_T *tCAN) { if((tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) return 0; else if((tCAN->IF[1].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) return 1; else return 2; } /** * @brief Enter initialization mode * @param[in] tCAN The base address of can module. * @return None * @details This function is used to set CAN to enter initialization mode and enable access bit timing * register. After bit timing configuration ready, user must call CAN_LeaveInitMode() * to leave initialization mode and lock bit timing register to let new configuration * take effect. */ void CAN_EnterInitMode(CAN_T *tCAN) { tCAN->CON |= CAN_CON_INIT_Msk; tCAN->CON |= CAN_CON_CCE_Msk; } /** * @brief Leave initialization mode * @param[in] tCAN The base address of can module. * @return None * @details This function is used to set CAN to leave initialization mode to let * bit timing configuration take effect after configuration ready. */ void CAN_LeaveInitMode(CAN_T *tCAN) { tCAN->CON &= (~(CAN_CON_INIT_Msk | CAN_CON_CCE_Msk)); while(tCAN->CON & CAN_CON_INIT_Msk); /* Check INIT bit is released */ } /** * @brief Wait message into message buffer in basic mode. * @param[in] tCAN The base address of can module. * @return None * @details This function is used to wait message into message buffer in basic mode. Please notice the * function is polling NEWDAT bit of MCON register by while loop and it is used in basic mode. */ void CAN_WaitMsg(CAN_T *tCAN) { tCAN->STATUS = 0x0; /* clr status */ while (1) { if(tCAN->IF[1].MCON & CAN_IF_MCON_NEWDAT_Msk) { /* check new data */ DEBUG_PRINTF("New Data IN\n"); break; } if(tCAN->STATUS & CAN_STATUS_RXOK_Msk) { DEBUG_PRINTF("Rx OK\n"); } if(tCAN->STATUS & CAN_STATUS_LEC_Msk) { DEBUG_PRINTF("Error\n"); } } } /** * @brief Get current bit rate * @param[in] tCAN The base address of can module. * @return Current Bit-Rate (kilo bit per second) * @details Return current CAN bit rate according to the user bit-timing parameter settings */ uint32_t CAN_GetCANBitRate(CAN_T *tCAN) { uint8_t u8Tseg1,u8Tseg2; uint32_t u32Bpr; u8Tseg1 = (tCAN->BTIME & CAN_BTIME_TSEG1_Msk) >> CAN_BTIME_TSEG1_Pos; u8Tseg2 = (tCAN->BTIME & CAN_BTIME_TSEG2_Msk) >> CAN_BTIME_TSEG2_Pos; u32Bpr = (tCAN->BTIME & CAN_BTIME_BRP_Msk) | (tCAN->BRPE << 6); return (SystemCoreClock/(u32Bpr+1)/(u8Tseg1 + u8Tseg2 + 3)); } /** * @brief Switch the CAN into test mode. * @param[in] tCAN The base address of can module. * @param[in] u8TestMask Specifies the configuration in test modes * CAN_TEST_BASIC_Msk : Enable basic mode of test mode * CAN_TESTR_SILENT_Msk : Enable silent mode of test mode * CAN_TESTR_LBACK_Msk : Enable Loop Back Mode of test mode * CAN_TESTR_TX0_Msk/CAN_TESTR_TX1_Msk: Control CAN_TX pin bit field * @return None * @details Switch the CAN into test mode. There are four test mode (BASIC/SILENT/LOOPBACK/ * LOOPBACK combined SILENT/CONTROL_TX_PIN)could be selected. After setting test mode,user * must call CAN_LeaveInitMode() to let the setting take effect. */ void CAN_EnterTestMode(CAN_T *tCAN, uint8_t u8TestMask) { tCAN->CON |= CAN_CON_TEST_Msk; tCAN->TEST = u8TestMask; } /** * @brief Leave the test mode * @param[in] tCAN The base address of can module. * @return None * @details This function is used to Leave the test mode (switch into normal mode). */ void CAN_LeaveTestMode(CAN_T *tCAN) { tCAN->CON |= CAN_CON_TEST_Msk; tCAN->TEST &= ~(CAN_TEST_LBACK_Msk | CAN_TEST_SILENT_Msk | CAN_TEST_BASIC_Msk); tCAN->CON &= (~CAN_CON_TEST_Msk); } /** * @brief Get the waiting status of a received message. * @param[in] tCAN The base address of can module. * @param[in] u8MsgObj Specifies the Message object number, from 0 to 31. * @retval non-zero The corresponding message object has a new data bit is set. * @retval 0 No message object has new data. * @details This function is used to get the waiting status of a received message. */ uint32_t CAN_IsNewDataReceived(CAN_T *tCAN, uint8_t u8MsgObj) { return (u8MsgObj < 16 ? tCAN->NDAT1 & (1 << u8MsgObj) : tCAN->NDAT2 & (1 << (u8MsgObj-16))); } /** * @brief Send CAN message in BASIC mode of test mode * @param[in] tCAN The base address of can module. * @param[in] pCanMsg Pointer to the message structure containing data to transmit. * @return TRUE: Transmission OK * FALSE: Check busy flag of interface 0 is timeout * @details The function is used to send CAN message in BASIC mode of test mode. Before call the API, * the user should be call CAN_EnterTestMode(CAN_TESTR_BASIC) and let CAN controller enter * basic mode of test mode. Please notice IF1 Registers used as Tx Buffer in basic mode. */ int32_t CAN_BasicSendMsg(CAN_T *tCAN, STR_CANMSG_T* pCanMsg) { uint32_t i=0; while(tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk); tCAN->STATUS &= (~CAN_STATUS_TXOK_Msk); tCAN->IF[0].CMASK = CAN_IF_CMASK_WRRD_Msk; if (pCanMsg->IdType == CAN_STD_ID) { /* standard ID*/ tCAN->IF[0].ARB1 = 0; tCAN->IF[0].ARB2 = (((pCanMsg->Id)&0x7FF)<<2) ; } else { /* extended ID*/ tCAN->IF[0].ARB1 = (pCanMsg->Id)&0xFFFF; tCAN->IF[0].ARB2 = ((pCanMsg->Id)&0x1FFF0000)>>16 | CAN_IF_ARB2_XTD_Msk; } if(pCanMsg->FrameType) tCAN->IF[0].ARB2 |= CAN_IF_ARB2_DIR_Msk; else tCAN->IF[0].ARB2 &= (~CAN_IF_ARB2_DIR_Msk); tCAN->IF[0].MCON = (tCAN->IF[0].MCON & (~CAN_IF_MCON_DLC_Msk)) | pCanMsg->DLC; tCAN->IF[0].DAT_A1 = ((uint16_t)pCanMsg->Data[1]<<8) | pCanMsg->Data[0]; tCAN->IF[0].DAT_A2 = ((uint16_t)pCanMsg->Data[3]<<8) | pCanMsg->Data[2]; tCAN->IF[0].DAT_B1 = ((uint16_t)pCanMsg->Data[5]<<8) | pCanMsg->Data[4]; tCAN->IF[0].DAT_B2 = ((uint16_t)pCanMsg->Data[7]<<8) | pCanMsg->Data[6]; /* request transmission*/ tCAN->IF[0].CREQ &= (~CAN_IF_CREQ_BUSY_Msk); if(tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) { DEBUG_PRINTF("Cannot clear busy for sending ...\n"); return FALSE; } tCAN->IF[0].CREQ |= CAN_IF_CREQ_BUSY_Msk; // sending for ( i=0; i<0xFFFFF; i++) { if((tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) break; } if ( i >= 0xFFFFF ) { DEBUG_PRINTF("Cannot send out...\n"); return FALSE; } return TRUE; } /** * @brief Get a message information in BASIC mode. * * @param[in] tCAN The base address of can module. * @param[out] pCanMsg Pointer to the message structure where received data is copied. * * @return FALSE No any message received. \n * TRUE Receive a message success. * */ int32_t CAN_BasicReceiveMsg(CAN_T *tCAN, STR_CANMSG_T* pCanMsg) { if((tCAN->IF[1].MCON & CAN_IF_MCON_NEWDAT_Msk) == 0) { /* In basic mode, receive data always save in IF2 */ return FALSE; } tCAN->STATUS &= (~CAN_STATUS_RXOK_Msk); tCAN->IF[1].CMASK = CAN_IF_CMASK_ARB_Msk | CAN_IF_CMASK_CONTROL_Msk | CAN_IF_CMASK_DATAA_Msk | CAN_IF_CMASK_DATAB_Msk; if((tCAN->IF[1].ARB2 & CAN_IF_ARB2_XTD_Msk) == 0) { /* standard ID*/ pCanMsg->IdType = CAN_STD_ID; pCanMsg->Id = (tCAN->IF[1].ARB2 >> 2) & 0x07FF; } else { /* extended ID*/ pCanMsg->IdType = CAN_EXT_ID; pCanMsg->Id = (tCAN->IF[1].ARB2 & 0x1FFF)<<16; pCanMsg->Id |= (uint32_t)tCAN->IF[1].ARB1; } pCanMsg->FrameType = !((tCAN->IF[1].ARB2 & CAN_IF_ARB2_DIR_Msk) >> CAN_IF_ARB2_DIR_Pos); pCanMsg->DLC = tCAN->IF[1].MCON & CAN_IF_MCON_DLC_Msk; pCanMsg->Data[0] = tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA0_Msk; pCanMsg->Data[1] = (tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA1_Msk) >> CAN_IF_DAT_A1_DATA1_Pos; pCanMsg->Data[2] = tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA2_Msk; pCanMsg->Data[3] = (tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA3_Msk) >> CAN_IF_DAT_A2_DATA3_Pos; pCanMsg->Data[4] = tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA4_Msk; pCanMsg->Data[5] = (tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA5_Msk) >> CAN_IF_DAT_B1_DATA5_Pos; pCanMsg->Data[6] = tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA6_Msk; pCanMsg->Data[7] = (tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA7_Msk) >> CAN_IF_DAT_B2_DATA7_Pos; return TRUE; } /** * @brief Set Rx message object * @param[in] tCAN The base address of can module. * @param[in] u8MsgObj Specifies the Message object number, from 0 to 31. * @param[in] u8idType Specifies the identifier type of the frames that will be transmitted * This parameter can be one of the following values: * CAN_STD_ID (standard ID, 11-bit) * CAN_EXT_ID (extended ID, 29-bit) * @param[in] u32id Specifies the identifier used for acceptance filtering. * @param[in] u8singleOrFifoLast Specifies the end-of-buffer indicator. * This parameter can be one of the following values: * TRUE: for a single receive object or a FIFO receive object that is the last one of the FIFO. * FALSE: for a FIFO receive object that is not the last one. * @retval TRUE SUCCESS * @retval FALSE No useful interface * @details The function is used to configure a receive message object. */ int32_t CAN_SetRxMsgObj(CAN_T *tCAN, uint8_t u8MsgObj, uint8_t u8idType, uint32_t u32id, uint8_t u8singleOrFifoLast) { uint8_t u8MsgIfNum=0; if ((u8MsgIfNum = GetFreeIF(tCAN)) == 2) { /* Check Free Interface for configure */ return FALSE; } /* Command Setting */ tCAN->IF[u8MsgIfNum].CMASK = CAN_IF_CMASK_WRRD_Msk | CAN_IF_CMASK_MASK_Msk | CAN_IF_CMASK_ARB_Msk | CAN_IF_CMASK_CONTROL_Msk | CAN_IF_CMASK_DATAA_Msk | CAN_IF_CMASK_DATAB_Msk; if (u8idType == CAN_STD_ID) { /* According STD/EXT ID format,Configure Mask and Arbitration register */ tCAN->IF[u8MsgIfNum].ARB1 = 0; tCAN->IF[u8MsgIfNum].ARB2 = CAN_IF_ARB2_MSGVAL_Msk | (u32id & 0x7FF)<< 2; } else { tCAN->IF[u8MsgIfNum].ARB1 = u32id & 0xFFFF; tCAN->IF[u8MsgIfNum].ARB2 = CAN_IF_ARB2_MSGVAL_Msk | CAN_IF_ARB2_XTD_Msk | (u32id & 0x1FFF0000)>>16; } tCAN->IF[u8MsgIfNum].MCON |= CAN_IF_MCON_UMASK_Msk | CAN_IF_MCON_RXIE_Msk; if(u8singleOrFifoLast) tCAN->IF[u8MsgIfNum].MCON |= CAN_IF_MCON_EOB_Msk; else tCAN->IF[u8MsgIfNum].MCON &= (~CAN_IF_MCON_EOB_Msk); tCAN->IF[u8MsgIfNum].DAT_A1 = 0; tCAN->IF[u8MsgIfNum].DAT_A2 = 0; tCAN->IF[u8MsgIfNum].DAT_B1 = 0; tCAN->IF[u8MsgIfNum].DAT_B2 = 0; tCAN->IF[u8MsgIfNum].CREQ = 1 + u8MsgObj; return TRUE; } /** * @brief Gets the message * @param[in] tCAN The base address of can module. * @param[in] u8MsgObj Specifies the Message object number, from 0 to 31. * @param[in] u8Release Specifies the message release indicator. * This parameter can be one of the following values: * TRUE: the message object is released when getting the data. * FALSE:the message object is not released. * @param[out] pCanMsg Pointer to the message structure where received data is copied. * @retval TRUE Success * @retval FALSE No any message received * @details Gets the message, if received. */ int32_t CAN_ReadMsgObj(CAN_T *tCAN, uint8_t u8MsgObj, uint8_t u8Release, STR_CANMSG_T* pCanMsg) { if (!CAN_IsNewDataReceived(tCAN, u8MsgObj)) { return FALSE; } tCAN->STATUS &= (~CAN_STATUS_RXOK_Msk); /* read the message contents*/ tCAN->IF[1].CMASK = CAN_IF_CMASK_MASK_Msk | CAN_IF_CMASK_ARB_Msk | CAN_IF_CMASK_CONTROL_Msk | CAN_IF_CMASK_CLRINTPND_Msk | (u8Release ? CAN_IF_CMASK_TXRQSTNEWDAT_Msk : 0) | CAN_IF_CMASK_DATAA_Msk | CAN_IF_CMASK_DATAB_Msk; tCAN->IF[1].CREQ = 1 + u8MsgObj; while (tCAN->IF[1].CREQ & CAN_IF_CREQ_BUSY_Msk) { /*Wait*/ } if ((tCAN->IF[1].ARB2 & CAN_IF_ARB2_XTD_Msk) == 0) { /* standard ID*/ pCanMsg->IdType = CAN_STD_ID; pCanMsg->Id = (tCAN->IF[1].ARB2 & CAN_IF_ARB2_ID_Msk) >> 2; } else { /* extended ID*/ pCanMsg->IdType = CAN_EXT_ID; pCanMsg->Id = (((tCAN->IF[1].ARB2) & 0x1FFF)<<16) | tCAN->IF[1].ARB1; } pCanMsg->DLC = tCAN->IF[1].MCON & CAN_IF_MCON_DLC_Msk; pCanMsg->Data[0] = tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA0_Msk; pCanMsg->Data[1] = (tCAN->IF[1].DAT_A1 & CAN_IF_DAT_A1_DATA1_Msk) >> CAN_IF_DAT_A1_DATA1_Pos; pCanMsg->Data[2] = tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA2_Msk; pCanMsg->Data[3] = (tCAN->IF[1].DAT_A2 & CAN_IF_DAT_A2_DATA3_Msk) >> CAN_IF_DAT_A2_DATA3_Pos; pCanMsg->Data[4] = tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA4_Msk; pCanMsg->Data[5] = (tCAN->IF[1].DAT_B1 & CAN_IF_DAT_B1_DATA5_Msk) >> CAN_IF_DAT_B1_DATA5_Pos; pCanMsg->Data[6] = tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA6_Msk; pCanMsg->Data[7] = (tCAN->IF[1].DAT_B2 & CAN_IF_DAT_B2_DATA7_Msk) >> CAN_IF_DAT_B2_DATA7_Pos; return TRUE; } /// @endcond HIDDEN_SYMBOLS /** * @brief The function is used to set bus timing parameter according current clock and target baud-rate. * * @param[in] tCAN The base address of can module * @param[in] u32BaudRate The target CAN baud-rate. The range of u32BaudRate is 1~1000KHz * * @return u32CurrentBitRate Real baud-rate value */ uint32_t CAN_SetBaudRate(CAN_T *tCAN, uint32_t u32BaudRate) { uint8_t u8Tseg1,u8Tseg2; uint32_t u32Brp; uint32_t u32Value; CAN_EnterInitMode(tCAN); SystemCoreClockUpdate(); #if 0 // original implementation got 5% inaccuracy. u32Value = SystemCoreClock; if(u32BaudRate * 8 < (u32Value/2)) { u8Tseg1 = 2; u8Tseg2 = 3; } else { u8Tseg1 = 2; u8Tseg2 = 1; } #else u32Value = SystemCoreClock / u32BaudRate; /* Fix for most standard baud rates, include 125K */ u8Tseg1 = 3; u8Tseg2 = 2; while(1) { if(((u32Value % (u8Tseg1 + u8Tseg2 + 3)) == 0) | (u8Tseg1 >= 15)) break; u8Tseg1++; if((u32Value % (u8Tseg1 + u8Tseg2 + 3)) == 0) break; if(u8Tseg2 < 7) u8Tseg2++; } #endif u32Brp = SystemCoreClock/(u32BaudRate) / (u8Tseg1 + u8Tseg2 + 3) -1; u32Value = ((uint32_t)u8Tseg2 << CAN_BTIME_TSEG2_Pos) | ((uint32_t)u8Tseg1 << CAN_BTIME_TSEG1_Pos) | (u32Brp & CAN_BTIME_BRP_Msk) | (tCAN->BTIME & CAN_BTIME_SJW_Msk); tCAN->BTIME = u32Value; tCAN->BRPE = (u32Brp >> 6) & 0x0F; CAN_LeaveInitMode(tCAN); return (CAN_GetCANBitRate(tCAN)); } /** * @brief The function is used to disable all CAN interrupt. * * @param[in] tCAN The base address of can module * * @return None */ void CAN_Close(CAN_T *tCAN) { CAN_DisableInt(tCAN, (CAN_CON_IE_Msk|CAN_CON_SIE_Msk|CAN_CON_EIE_Msk)); } /** * @brief The function is sets bus timing parameter according current clock and target baud-rate. And set CAN operation mode. * * @param[in] tCAN The base address of can module * @param[in] u32BaudRate The target CAN baud-rate. The range of u32BaudRate is 1~1000KHz * @param[in] u32Mode The CAN operation mode. ( \ref CAN_NORMAL_MODE / \ref CAN_BASIC_MODE) * * @return u32CurrentBitRate Real baud-rate value */ uint32_t CAN_Open(CAN_T *tCAN, uint32_t u32BaudRate, uint32_t u32Mode) { uint32_t u32CurrentBitRate; u32CurrentBitRate = CAN_SetBaudRate(tCAN, u32BaudRate); if(u32Mode == CAN_BASIC_MODE) CAN_EnterTestMode(tCAN, CAN_TEST_BASIC_Msk); return u32CurrentBitRate; } /** * @brief The function is used to configure a transmit object. * * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum Specifies the Message object number, from 0 to 31 * @param[in] pCanMsg Pointer to the message structure where received data is copied. * * @return FALSE: No useful interface. \n * TRUE : Config message object success. * */ int32_t CAN_SetTxMsg(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg) { uint8_t u8MsgIfNum=0; uint32_t i=0; while((u8MsgIfNum = GetFreeIF(tCAN)) == 2) { i++; if(i > 0x10000000) return FALSE; } /* update the contents needed for transmission*/ tCAN->IF[u8MsgIfNum].CMASK = 0xF3; /*CAN_CMASK_WRRD_Msk | CAN_CMASK_MASK_Msk | CAN_CMASK_ARB_Msk | CAN_CMASK_CONTROL_Msk | CAN_CMASK_DATAA_Msk | CAN_CMASK_DATAB_Msk ; */ if (pCanMsg->IdType == CAN_STD_ID) { /* standard ID*/ tCAN->IF[u8MsgIfNum].ARB1 = 0; tCAN->IF[u8MsgIfNum].ARB2 = (((pCanMsg->Id)&0x7FF)<<2) | CAN_IF_ARB2_DIR_Msk | CAN_IF_ARB2_MSGVAL_Msk; } else { /* extended ID*/ tCAN->IF[u8MsgIfNum].ARB1 = (pCanMsg->Id)&0xFFFF; tCAN->IF[u8MsgIfNum].ARB2 = ((pCanMsg->Id)&0x1FFF0000)>>16 | CAN_IF_ARB2_DIR_Msk | CAN_IF_ARB2_XTD_Msk | CAN_IF_ARB2_MSGVAL_Msk; } if(pCanMsg->FrameType) tCAN->IF[u8MsgIfNum].ARB2 |= CAN_IF_ARB2_DIR_Msk; else tCAN->IF[u8MsgIfNum].ARB2 &= (~CAN_IF_ARB2_DIR_Msk); tCAN->IF[u8MsgIfNum].DAT_A1 = ((uint16_t)pCanMsg->Data[1]<<8) | pCanMsg->Data[0]; tCAN->IF[u8MsgIfNum].DAT_A2 = ((uint16_t)pCanMsg->Data[3]<<8) | pCanMsg->Data[2]; tCAN->IF[u8MsgIfNum].DAT_B1 = ((uint16_t)pCanMsg->Data[5]<<8) | pCanMsg->Data[4]; tCAN->IF[u8MsgIfNum].DAT_B2 = ((uint16_t)pCanMsg->Data[7]<<8) | pCanMsg->Data[6]; tCAN->IF[u8MsgIfNum].MCON = CAN_IF_MCON_NEWDAT_Msk | pCanMsg->DLC |CAN_IF_MCON_TXIE_Msk | CAN_IF_MCON_EOB_Msk; tCAN->IF[u8MsgIfNum].CREQ = 1 + u32MsgNum; return TRUE; } /** * @brief Set transmit request bit * * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum Specifies the Message object number, from 0 to 31. * * @return TRUE: Start transmit message. */ int32_t CAN_TriggerTxMsg(CAN_T *tCAN, uint32_t u32MsgNum) { STR_CANMSG_T rMsg; CAN_ReadMsgObj(tCAN, u32MsgNum,TRUE, &rMsg); tCAN->IF[0].CMASK = CAN_IF_CMASK_WRRD_Msk |CAN_IF_CMASK_TXRQSTNEWDAT_Msk; tCAN->IF[0].CREQ = 1 + u32MsgNum; return TRUE; } /** * @brief Enable CAN interrupt * * @param[in] tCAN The base address of can module. * @param[in] u32Mask Interrupt Mask. ( \ref CAN_CON_IE_Msk / \ref CAN_CON_SIE_Msk / \ref CAN_CON_EIE_Msk) * * @return None */ void CAN_EnableInt(CAN_T *tCAN, uint32_t u32Mask) { CAN_EnterInitMode(tCAN); tCAN->CON = (tCAN->CON & 0xF1) | ((u32Mask & CAN_CON_IE_Msk )? CAN_CON_IE_Msk :0) | ((u32Mask & CAN_CON_SIE_Msk )? CAN_CON_SIE_Msk:0) | ((u32Mask & CAN_CON_EIE_Msk )? CAN_CON_EIE_Msk:0); CAN_LeaveInitMode(tCAN); } /** * @brief Disable CAN interrupt * * @param[in] tCAN The base address of can module. * @param[in] u32Mask Interrupt Mask. ( \ref CAN_CON_IE_Msk / \ref CAN_CON_SIE_Msk / \ref CAN_CON_EIE_Msk) * * @return None */ void CAN_DisableInt(CAN_T *tCAN, uint32_t u32Mask) { CAN_EnterInitMode(tCAN); tCAN->CON = tCAN->CON & ~(CAN_CON_IE_Msk | ((u32Mask & CAN_CON_SIE_Msk)?CAN_CON_SIE_Msk:0) | ((u32Mask & CAN_CON_EIE_Msk)?CAN_CON_EIE_Msk:0)); CAN_LeaveInitMode(tCAN); } /** * @brief The function is used to configure a receive message object * * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum Specifies the Message object number, from 0 to 31 * @param[in] u32IDType Specifies the identifier type of the frames that will be transmitted. ( \ref CAN_STD_ID / \ref CAN_EXT_ID) * @param[in] u32ID Specifies the identifier used for acceptance filtering. * * @return FALSE: No useful interface \n * TRUE : Configure a receive message object success. * */ int32_t CAN_SetRxMsg(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32IDType, uint32_t u32ID) { uint32_t u32TimeOutCount = 0; while(CAN_SetRxMsgObj(tCAN, u32MsgNum, u32IDType, u32ID, TRUE) == FALSE) { u32TimeOutCount++; if(u32TimeOutCount >= 0x10000000) return FALSE; } return TRUE; } /** * @brief The function is used to configure several receive message objects * * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum The starting MSG RAM number. (0 ~ 31) * @param[in] u32MsgCount the number of MSG RAM of the FIFO. * @param[in] u32IDType Specifies the identifier type of the frames that will be transmitted. ( \ref CAN_STD_ID / \ref CAN_EXT_ID) * @param[in] u32ID Specifies the identifier used for acceptance filtering. * * @return FALSE: No useful interface \n * TRUE : Configure receive message objects success. * */ int32_t CAN_SetMultiRxMsg(CAN_T *tCAN, uint32_t u32MsgNum , uint32_t u32MsgCount, uint32_t u32IDType, uint32_t u32ID) { uint32_t i = 0; uint32_t u32TimeOutCount; uint32_t u32EOB_Flag = 0; for(i= 1; i < u32MsgCount; i++) { u32TimeOutCount = 0; u32MsgNum += (i - 1); if(i == u32MsgCount) u32EOB_Flag = 1; while(CAN_SetRxMsgObj(tCAN, u32MsgNum, u32IDType, u32ID, u32EOB_Flag) == FALSE) { u32TimeOutCount++; if(u32TimeOutCount >= 0x10000000) return FALSE; } } return TRUE; } /** * @brief Send CAN message. * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum Specifies the Message object number, from 0 to 31 * @param[in] pCanMsg Pointer to the message structure where received data is copied. * * @return FALSE: When operation in basic mode: Transmit message time out, or when operation in normal mode: No useful interface. \n * TRUE : Transmit Message success. */ int32_t CAN_Transmit(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg) { if((tCAN->CON & CAN_CON_TEST_Msk) && (tCAN->TEST & CAN_TEST_BASIC_Msk)) { return (CAN_BasicSendMsg(tCAN, pCanMsg)); } else { if(CAN_SetTxMsg(tCAN, u32MsgNum, pCanMsg) == FALSE) return FALSE; CAN_TriggerTxMsg(tCAN, u32MsgNum); } return TRUE; } /** * @brief Gets the message, if received. * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum Specifies the Message object number, from 0 to 31 * @param[out] pCanMsg Pointer to the message structure where received data is copied. * * @return FALSE: No any message received. \n * TRUE : Receive Message success. */ int32_t CAN_Receive(CAN_T *tCAN, uint32_t u32MsgNum , STR_CANMSG_T* pCanMsg) { if((tCAN->CON & CAN_CON_TEST_Msk) && (tCAN->TEST & CAN_TEST_BASIC_Msk)) { return (CAN_BasicReceiveMsg(tCAN, pCanMsg)); } else { return CAN_ReadMsgObj(tCAN, u32MsgNum, TRUE, pCanMsg); } } /** * @brief Clear interrupt pending bit. * @param[in] tCAN The base address of can module. * @param[in] u32MsgNum Specifies the Message object number, from 0 to 31 * * @return None * */ void CAN_CLR_INT_PENDING_BIT(CAN_T *tCAN, uint8_t u32MsgNum) { uint32_t u32MsgIfNum = 0; uint32_t u32IFBusyCount = 0; while(u32IFBusyCount < 0x10000000) { if((tCAN->IF[0].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) { u32MsgIfNum = 0; break; } else if((tCAN->IF[1].CREQ & CAN_IF_CREQ_BUSY_Msk) == 0) { u32MsgIfNum = 1; break; } u32IFBusyCount++; } tCAN->IF[u32MsgIfNum].CMASK = CAN_IF_CMASK_CLRINTPND_Msk | CAN_IF_CMASK_TXRQSTNEWDAT_Msk; tCAN->IF[u32MsgIfNum].CREQ = 1 + u32MsgNum; } /*@}*/ /* end of group NUC472_442_CAN_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group NUC472_442_CAN_Driver */ /*@}*/ /* end of group NUC472_442_Device_Driver */ /*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/