Mouse code for the MacroRat
mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/sdk/softdevice/s132/headers/nrf_ble_gap.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* * Copyright (c) 2000 Nordic Semiconductor ASA * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA * integrated circuit in a product or a software update for such product, must reproduce * the above copyright notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be * used to endorse or promote products derived from this software without specific prior * written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary or object form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @addtogroup BLE_GAP Generic Access Profile (GAP) @{ @brief Definitions and prototypes for the GAP interface. */ #ifndef NRF_BLE_GAP_H__ #define NRF_BLE_GAP_H__ #include "nrf_ble_types.h" #include "nrf_ble_ranges.h" #include "nrf_svc.h" #ifdef __cplusplus extern "C" { #endif /**@addtogroup BLE_GAP_ENUMERATIONS Enumerations * @{ */ /**@brief GAP API SVC numbers. */ enum BLE_GAP_SVCS { SD_BLE_GAP_ADDRESS_SET = BLE_GAP_SVC_BASE, /**< Set own Bluetooth Address. */ SD_BLE_GAP_ADDRESS_GET, /**< Get own Bluetooth Address. */ SD_BLE_GAP_ADV_DATA_SET, /**< Set Advertising Data. */ SD_BLE_GAP_ADV_START, /**< Start Advertising. */ SD_BLE_GAP_ADV_STOP, /**< Stop Advertising. */ SD_BLE_GAP_CONN_PARAM_UPDATE, /**< Connection Parameter Update. */ SD_BLE_GAP_DISCONNECT, /**< Disconnect. */ SD_BLE_GAP_TX_POWER_SET, /**< Set TX Power. */ SD_BLE_GAP_APPEARANCE_SET, /**< Set Appearance. */ SD_BLE_GAP_APPEARANCE_GET, /**< Get Appearance. */ SD_BLE_GAP_PPCP_SET, /**< Set PPCP. */ SD_BLE_GAP_PPCP_GET, /**< Get PPCP. */ SD_BLE_GAP_DEVICE_NAME_SET, /**< Set Device Name. */ SD_BLE_GAP_DEVICE_NAME_GET, /**< Get Device Name. */ SD_BLE_GAP_AUTHENTICATE, /**< Initiate Pairing/Bonding. */ SD_BLE_GAP_SEC_PARAMS_REPLY, /**< Reply with Security Parameters. */ SD_BLE_GAP_AUTH_KEY_REPLY, /**< Reply with an authentication key. */ SD_BLE_GAP_LESC_DHKEY_REPLY, /**< Reply with an LE Secure Connections DHKey. */ SD_BLE_GAP_KEYPRESS_NOTIFY, /**< Notify of a keypress during an authentication procedure. */ SD_BLE_GAP_LESC_OOB_DATA_GET, /**< Get the local LE Secure Connections OOB data. */ SD_BLE_GAP_LESC_OOB_DATA_SET, /**< Set the remote LE Secure Connections OOB data. */ SD_BLE_GAP_ENCRYPT, /**< Initiate encryption procedure. */ SD_BLE_GAP_SEC_INFO_REPLY, /**< Reply with Security Information. */ SD_BLE_GAP_CONN_SEC_GET, /**< Obtain connection security level. */ SD_BLE_GAP_RSSI_START, /**< Start reporting of changes in RSSI. */ SD_BLE_GAP_RSSI_STOP, /**< Stop reporting of changes in RSSI. */ SD_BLE_GAP_SCAN_START, /**< Start Scanning. */ SD_BLE_GAP_SCAN_STOP, /**< Stop Scanning. */ SD_BLE_GAP_CONNECT, /**< Connect. */ SD_BLE_GAP_CONNECT_CANCEL, /**< Cancel ongoing connection procedure. */ SD_BLE_GAP_RSSI_GET, /**< Get the last RSSI sample. */ }; /**@brief GAP Event IDs. * IDs that uniquely identify an event coming from the stack to the application. */ enum BLE_GAP_EVTS { BLE_GAP_EVT_CONNECTED = BLE_GAP_EVT_BASE, /**< Connection established. \n See @ref ble_gap_evt_connected_t. */ BLE_GAP_EVT_DISCONNECTED, /**< Disconnected from peer. \n See @ref ble_gap_evt_disconnected_t. */ BLE_GAP_EVT_CONN_PARAM_UPDATE, /**< Connection Parameters updated. \n See @ref ble_gap_evt_conn_param_update_t. */ BLE_GAP_EVT_SEC_PARAMS_REQUEST, /**< Request to provide security parameters. \n Reply with @ref sd_ble_gap_sec_params_reply. \n See @ref ble_gap_evt_sec_params_request_t. */ BLE_GAP_EVT_SEC_INFO_REQUEST, /**< Request to provide security information. \n Reply with @ref sd_ble_gap_sec_info_reply. \n See @ref ble_gap_evt_sec_info_request_t. */ BLE_GAP_EVT_PASSKEY_DISPLAY, /**< Request to display a passkey to the user. \n In LESC Numeric Comparison, reply with @ref sd_ble_gap_auth_key_reply. \n See @ref ble_gap_evt_passkey_display_t. */ BLE_GAP_EVT_KEY_PRESSED, /**< Notification of a keypress on the remote device.\n See @ref ble_gap_evt_key_pressed_t */ BLE_GAP_EVT_AUTH_KEY_REQUEST, /**< Request to provide an authentication key. \n Reply with @ref sd_ble_gap_auth_key_reply. \n See @ref ble_gap_evt_auth_key_request_t. */ BLE_GAP_EVT_LESC_DHKEY_REQUEST, /**< Request to calculate an LE Secure Connections DHKey. \n Reply with @ref sd_ble_gap_lesc_dhkey_reply. \n See @ref ble_gap_evt_lesc_dhkey_request_t */ BLE_GAP_EVT_AUTH_STATUS, /**< Authentication procedure completed with status. \n See @ref ble_gap_evt_auth_status_t. */ BLE_GAP_EVT_CONN_SEC_UPDATE, /**< Connection security updated. \n See @ref ble_gap_evt_conn_sec_update_t. */ BLE_GAP_EVT_TIMEOUT, /**< Timeout expired. \n See @ref ble_gap_evt_timeout_t. */ BLE_GAP_EVT_RSSI_CHANGED, /**< RSSI report. \n See @ref ble_gap_evt_rssi_changed_t. */ BLE_GAP_EVT_ADV_REPORT, /**< Advertising report. \n See @ref ble_gap_evt_adv_report_t. */ BLE_GAP_EVT_SEC_REQUEST, /**< Security Request. \n See @ref ble_gap_evt_sec_request_t. */ BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST, /**< Connection Parameter Update Request. \n Reply with @ref sd_ble_gap_conn_param_update. \n See @ref ble_gap_evt_conn_param_update_request_t. */ BLE_GAP_EVT_SCAN_REQ_REPORT, /**< Scan request report. \n See @ref ble_gap_evt_scan_req_report_t. */ }; /**@brief GAP Option IDs. * IDs that uniquely identify a GAP option. */ enum BLE_GAP_OPTS { BLE_GAP_OPT_CH_MAP = BLE_GAP_OPT_BASE, /**< Channel Map. @ref ble_gap_opt_ch_map_t */ BLE_GAP_OPT_LOCAL_CONN_LATENCY, /**< Local connection latency. @ref ble_gap_opt_local_conn_latency_t */ BLE_GAP_OPT_PASSKEY, /**< Set passkey. @ref ble_gap_opt_passkey_t */ BLE_GAP_OPT_PRIVACY, /**< Custom privacy. @ref ble_gap_opt_privacy_t */ BLE_GAP_OPT_SCAN_REQ_REPORT, /**< Scan request report. @ref ble_gap_opt_scan_req_report_t */ BLE_GAP_OPT_COMPAT_MODE /**< Compatibility mode. @ref ble_gap_opt_compat_mode_t */ }; /** @} */ /**@addtogroup BLE_GAP_DEFINES Defines * @{ */ /**@defgroup BLE_ERRORS_GAP SVC return values specific to GAP * @{ */ #define BLE_ERROR_GAP_UUID_LIST_MISMATCH (NRF_GAP_ERR_BASE + 0x000) /**< UUID list does not contain an integral number of UUIDs. */ #define BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST (NRF_GAP_ERR_BASE + 0x001) /**< Use of Whitelist not permitted with discoverable advertising. */ #define BLE_ERROR_GAP_INVALID_BLE_ADDR (NRF_GAP_ERR_BASE + 0x002) /**< The upper two bits of the address do not correspond to the specified address type. */ #define BLE_ERROR_GAP_WHITELIST_IN_USE (NRF_GAP_ERR_BASE + 0x003) /**< Attempt to overwrite the whitelist while already in use by another operation. */ /**@} */ /**@defgroup BLE_GAP_ROLES GAP Roles * @note Not explicitly used in peripheral API, but will be relevant for central API. * @{ */ #define BLE_GAP_ROLE_INVALID 0x0 /**< Invalid Role. */ #define BLE_GAP_ROLE_PERIPH 0x1 /**< Peripheral Role. */ #define BLE_GAP_ROLE_CENTRAL 0x2 /**< Central Role. */ /**@} */ /**@defgroup BLE_GAP_TIMEOUT_SOURCES GAP Timeout sources * @{ */ #define BLE_GAP_TIMEOUT_SRC_ADVERTISING 0x00 /**< Advertising timeout. */ #define BLE_GAP_TIMEOUT_SRC_SECURITY_REQUEST 0x01 /**< Security request timeout. */ #define BLE_GAP_TIMEOUT_SRC_SCAN 0x02 /**< Scanning timeout. */ #define BLE_GAP_TIMEOUT_SRC_CONN 0x03 /**< Connection timeout. */ /**@} */ /**@defgroup BLE_GAP_ADDR_TYPES GAP Address types * @{ */ #define BLE_GAP_ADDR_TYPE_PUBLIC 0x00 /**< Public address. */ #define BLE_GAP_ADDR_TYPE_RANDOM_STATIC 0x01 /**< Random Static address. */ #define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE 0x02 /**< Private Resolvable address. */ #define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03 /**< Private Non-Resolvable address. */ /**@} */ /**@defgroup BLE_GAP_ADDR_CYCLE_MODES GAP Address cycle modes * @{ */ #define BLE_GAP_ADDR_CYCLE_MODE_NONE 0x00 /**< Set addresses directly, no automatic address cycling. */ #define BLE_GAP_ADDR_CYCLE_MODE_AUTO 0x01 /**< Automatically generate and update private addresses. */ /** @} */ /**@brief The default interval in seconds at which a private address is refreshed when address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO. */ #define BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S (60 * 15) /** @brief BLE address length. */ #define BLE_GAP_ADDR_LEN 6 /**@defgroup BLE_GAP_AD_TYPE_DEFINITIONS GAP Advertising and Scan Response Data format * @note Found at https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm * @{ */ #define BLE_GAP_AD_TYPE_FLAGS 0x01 /**< Flags for discoverability. */ #define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE 0x02 /**< Partial list of 16 bit service UUIDs. */ #define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE 0x03 /**< Complete list of 16 bit service UUIDs. */ #define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE 0x04 /**< Partial list of 32 bit service UUIDs. */ #define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE 0x05 /**< Complete list of 32 bit service UUIDs. */ #define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE 0x06 /**< Partial list of 128 bit service UUIDs. */ #define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE 0x07 /**< Complete list of 128 bit service UUIDs. */ #define BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME 0x08 /**< Short local device name. */ #define BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME 0x09 /**< Complete local device name. */ #define BLE_GAP_AD_TYPE_TX_POWER_LEVEL 0x0A /**< Transmit power level. */ #define BLE_GAP_AD_TYPE_CLASS_OF_DEVICE 0x0D /**< Class of device. */ #define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C 0x0E /**< Simple Pairing Hash C. */ #define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R 0x0F /**< Simple Pairing Randomizer R. */ #define BLE_GAP_AD_TYPE_SECURITY_MANAGER_TK_VALUE 0x10 /**< Security Manager TK Value. */ #define BLE_GAP_AD_TYPE_SECURITY_MANAGER_OOB_FLAGS 0x11 /**< Security Manager Out Of Band Flags. */ #define BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE 0x12 /**< Slave Connection Interval Range. */ #define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT 0x14 /**< List of 16-bit Service Solicitation UUIDs. */ #define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT 0x15 /**< List of 128-bit Service Solicitation UUIDs. */ #define BLE_GAP_AD_TYPE_SERVICE_DATA 0x16 /**< Service Data - 16-bit UUID. */ #define BLE_GAP_AD_TYPE_PUBLIC_TARGET_ADDRESS 0x17 /**< Public Target Address. */ #define BLE_GAP_AD_TYPE_RANDOM_TARGET_ADDRESS 0x18 /**< Random Target Address. */ #define BLE_GAP_AD_TYPE_APPEARANCE 0x19 /**< Appearance. */ #define BLE_GAP_AD_TYPE_ADVERTISING_INTERVAL 0x1A /**< Advertising Interval. */ #define BLE_GAP_AD_TYPE_LE_BLUETOOTH_DEVICE_ADDRESS 0x1B /**< LE Bluetooth Device Address. */ #define BLE_GAP_AD_TYPE_LE_ROLE 0x1C /**< LE Role. */ #define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C256 0x1D /**< Simple Pairing Hash C-256. */ #define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R256 0x1E /**< Simple Pairing Randomizer R-256. */ #define BLE_GAP_AD_TYPE_SERVICE_DATA_32BIT_UUID 0x20 /**< Service Data - 32-bit UUID. */ #define BLE_GAP_AD_TYPE_SERVICE_DATA_128BIT_UUID 0x21 /**< Service Data - 128-bit UUID. */ #define BLE_GAP_AD_TYPE_URI 0x24 /**< URI */ #define BLE_GAP_AD_TYPE_3D_INFORMATION_DATA 0x3D /**< 3D Information Data. */ #define BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA 0xFF /**< Manufacturer Specific Data. */ /**@} */ /**@defgroup BLE_GAP_ADV_FLAGS GAP Advertisement Flags * @{ */ #define BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE (0x01) /**< LE Limited Discoverable Mode. */ #define BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE (0x02) /**< LE General Discoverable Mode. */ #define BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED (0x04) /**< BR/EDR not supported. */ #define BLE_GAP_ADV_FLAG_LE_BR_EDR_CONTROLLER (0x08) /**< Simultaneous LE and BR/EDR, Controller. */ #define BLE_GAP_ADV_FLAG_LE_BR_EDR_HOST (0x10) /**< Simultaneous LE and BR/EDR, Host. */ #define BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE (BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE Limited Discoverable Mode, BR/EDR not supported. */ #define BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE (BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE General Discoverable Mode, BR/EDR not supported. */ /**@} */ /**@defgroup BLE_GAP_ADV_INTERVALS GAP Advertising interval max and min * @{ */ #define BLE_GAP_ADV_INTERVAL_MIN 0x0020 /**< Minimum Advertising interval in 625 us units, i.e. 20 ms. */ #define BLE_GAP_ADV_NONCON_INTERVAL_MIN 0x00A0 /**< Minimum Advertising interval in 625 us units for non connectable mode, i.e. 100 ms. */ #define BLE_GAP_ADV_INTERVAL_MAX 0x4000 /**< Maximum Advertising interval in 625 us units, i.e. 10.24 s. */ /**@} */ /**@defgroup BLE_GAP_SCAN_INTERVALS GAP Scan interval max and min * @{ */ #define BLE_GAP_SCAN_INTERVAL_MIN 0x0004 /**< Minimum Scan interval in 625 us units, i.e. 2.5 ms. */ #define BLE_GAP_SCAN_INTERVAL_MAX 0x4000 /**< Maximum Scan interval in 625 us units, i.e. 10.24 s. */ /** @} */ /**@defgroup BLE_GAP_SCAN_WINDOW GAP Scan window max and min * @{ */ #define BLE_GAP_SCAN_WINDOW_MIN 0x0004 /**< Minimum Scan window in 625 us units, i.e. 2.5 ms. */ #define BLE_GAP_SCAN_WINDOW_MAX 0x4000 /**< Maximum Scan window in 625 us units, i.e. 10.24 s. */ /** @} */ /**@defgroup BLE_GAP_SCAN_TIMEOUT GAP Scan timeout max and min * @{ */ #define BLE_GAP_SCAN_TIMEOUT_MIN 0x0001 /**< Minimum Scan timeout in seconds. */ #define BLE_GAP_SCAN_TIMEOUT_MAX 0xFFFF /**< Maximum Scan timeout in seconds. */ /** @} */ /**@brief Maximum size of advertising data in octets. */ #define BLE_GAP_ADV_MAX_SIZE 31 /**@defgroup BLE_GAP_ADV_TYPES GAP Advertising types * @{ */ #define BLE_GAP_ADV_TYPE_ADV_IND 0x00 /**< Connectable undirected. */ #define BLE_GAP_ADV_TYPE_ADV_DIRECT_IND 0x01 /**< Connectable directed. */ #define BLE_GAP_ADV_TYPE_ADV_SCAN_IND 0x02 /**< Scannable undirected. */ #define BLE_GAP_ADV_TYPE_ADV_NONCONN_IND 0x03 /**< Non connectable undirected. */ /**@} */ /**@defgroup BLE_GAP_ADV_FILTER_POLICIES GAP Advertising filter policies * @{ */ #define BLE_GAP_ADV_FP_ANY 0x00 /**< Allow scan requests and connect requests from any device. */ #define BLE_GAP_ADV_FP_FILTER_SCANREQ 0x01 /**< Filter scan requests with whitelist. */ #define BLE_GAP_ADV_FP_FILTER_CONNREQ 0x02 /**< Filter connect requests with whitelist. */ #define BLE_GAP_ADV_FP_FILTER_BOTH 0x03 /**< Filter both scan and connect requests with whitelist. */ /**@} */ /**@defgroup BLE_GAP_ADV_TIMEOUT_VALUES GAP Advertising timeout values * @{ */ #define BLE_GAP_ADV_TIMEOUT_LIMITED_MAX 180 /**< Maximum advertising time in limited discoverable mode (TGAP(lim_adv_timeout) = 180s). */ #define BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED 0 /**< Unlimited advertising in general discoverable mode. */ /**@} */ /**@defgroup BLE_GAP_DISC_MODES GAP Discovery modes * @{ */ #define BLE_GAP_DISC_MODE_NOT_DISCOVERABLE 0x00 /**< Not discoverable discovery Mode. */ #define BLE_GAP_DISC_MODE_LIMITED 0x01 /**< Limited Discovery Mode. */ #define BLE_GAP_DISC_MODE_GENERAL 0x02 /**< General Discovery Mode. */ /**@} */ /**@defgroup BLE_GAP_IO_CAPS GAP IO Capabilities * @{ */ #define BLE_GAP_IO_CAPS_DISPLAY_ONLY 0x00 /**< Display Only. */ #define BLE_GAP_IO_CAPS_DISPLAY_YESNO 0x01 /**< Display and Yes/No entry. */ #define BLE_GAP_IO_CAPS_KEYBOARD_ONLY 0x02 /**< Keyboard Only. */ #define BLE_GAP_IO_CAPS_NONE 0x03 /**< No I/O capabilities. */ #define BLE_GAP_IO_CAPS_KEYBOARD_DISPLAY 0x04 /**< Keyboard and Display. */ /**@} */ /**@defgroup BLE_GAP_AUTH_KEY_TYPES GAP Authentication Key Types * @{ */ #define BLE_GAP_AUTH_KEY_TYPE_NONE 0x00 /**< No key (may be used to reject). */ #define BLE_GAP_AUTH_KEY_TYPE_PASSKEY 0x01 /**< 6-digit Passkey. */ #define BLE_GAP_AUTH_KEY_TYPE_OOB 0x02 /**< Out Of Band data. */ /**@} */ /**@defgroup BLE_GAP_KP_NOT_TYPES GAP Keypress Notification Types * @{ */ #define BLE_GAP_KP_NOT_TYPE_PASSKEY_START 0x00 /**< Passkey entry started. */ #define BLE_GAP_KP_NOT_TYPE_PASSKEY_DIGIT_IN 0x01 /**< Passkey digit entered. */ #define BLE_GAP_KP_NOT_TYPE_PASSKEY_DIGIT_OUT 0x02 /**< Passkey digit erased. */ #define BLE_GAP_KP_NOT_TYPE_PASSKEY_CLEAR 0x03 /**< Passkey cleared. */ #define BLE_GAP_KP_NOT_TYPE_PASSKEY_END 0x04 /**< Passkey entry completed. */ /**@} */ /**@defgroup BLE_GAP_SEC_STATUS GAP Security status * @{ */ #define BLE_GAP_SEC_STATUS_SUCCESS 0x00 /**< Procedure completed with success. */ #define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 /**< Procedure timed out. */ #define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 /**< Invalid PDU received. */ #define BLE_GAP_SEC_STATUS_RFU_RANGE1_BEGIN 0x03 /**< Reserved for Future Use range #1 begin. */ #define BLE_GAP_SEC_STATUS_RFU_RANGE1_END 0x80 /**< Reserved for Future Use range #1 end. */ #define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 /**< Passkey entry failed (user cancelled or other). */ #define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 /**< Out of Band Key not available. */ #define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 /**< Authentication requirements not met. */ #define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 /**< Confirm value failed. */ #define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 /**< Pairing not supported. */ #define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 /**< Encryption key size. */ #define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 /**< Unsupported SMP command. */ #define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 /**< Unspecified reason. */ #define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 /**< Too little time elapsed since last attempt. */ #define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A /**< Invalid parameters. */ #define BLE_GAP_SEC_STATUS_DHKEY_FAILURE 0x8B /**< DHKey check failure. */ #define BLE_GAP_SEC_STATUS_NUM_COMP_FAILURE 0x8C /**< Numeric Comparison failure. */ #define BLE_GAP_SEC_STATUS_BR_EDR_IN_PROG 0x8D /**< BR/EDR pairing in progress. */ #define BLE_GAP_SEC_STATUS_X_TRANS_KEY_DISALLOWED 0x8E /**< BR/EDR Link Key cannot be used for LE keys. */ #define BLE_GAP_SEC_STATUS_RFU_RANGE2_BEGIN 0x8F /**< Reserved for Future Use range #2 begin. */ #define BLE_GAP_SEC_STATUS_RFU_RANGE2_END 0xFF /**< Reserved for Future Use range #2 end. */ /**@} */ /**@defgroup BLE_GAP_SEC_STATUS_SOURCES GAP Security status sources * @{ */ #define BLE_GAP_SEC_STATUS_SOURCE_LOCAL 0x00 /**< Local failure. */ #define BLE_GAP_SEC_STATUS_SOURCE_REMOTE 0x01 /**< Remote failure. */ /**@} */ /**@defgroup BLE_GAP_CP_LIMITS GAP Connection Parameters Limits * @{ */ #define BLE_GAP_CP_MIN_CONN_INTVL_NONE 0xFFFF /**< No new minimum connection interval specified in connect parameters. */ #define BLE_GAP_CP_MIN_CONN_INTVL_MIN 0x0006 /**< Lowest minimum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */ #define BLE_GAP_CP_MIN_CONN_INTVL_MAX 0x0C80 /**< Highest minimum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */ #define BLE_GAP_CP_MAX_CONN_INTVL_NONE 0xFFFF /**< No new maximum connection interval specified in connect parameters. */ #define BLE_GAP_CP_MAX_CONN_INTVL_MIN 0x0006 /**< Lowest maximum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */ #define BLE_GAP_CP_MAX_CONN_INTVL_MAX 0x0C80 /**< Highest maximum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */ #define BLE_GAP_CP_SLAVE_LATENCY_MAX 0x01F3 /**< Highest slave latency permitted, in connection events. */ #define BLE_GAP_CP_CONN_SUP_TIMEOUT_NONE 0xFFFF /**< No new supervision timeout specified in connect parameters. */ #define BLE_GAP_CP_CONN_SUP_TIMEOUT_MIN 0x000A /**< Lowest supervision timeout permitted, in units of 10 ms, i.e. 100 ms. */ #define BLE_GAP_CP_CONN_SUP_TIMEOUT_MAX 0x0C80 /**< Highest supervision timeout permitted, in units of 10 ms, i.e. 32 s. */ /**@} */ /**@brief GAP device name maximum length. */ #define BLE_GAP_DEVNAME_MAX_LEN 31 /**@brief Disable RSSI events for connections */ #define BLE_GAP_RSSI_THRESHOLD_INVALID 0xFF /**@defgroup BLE_GAP_CONN_SEC_MODE_SET_MACROS GAP attribute security requirement setters * * See @ref ble_gap_conn_sec_mode_t. * @{ */ /**@brief Set sec_mode pointed to by ptr to have no access rights.*/ #define BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(ptr) do {(ptr)->sm = 0; (ptr)->lv = 0;} while(0) /**@brief Set sec_mode pointed to by ptr to require no protection, open link.*/ #define BLE_GAP_CONN_SEC_MODE_SET_OPEN(ptr) do {(ptr)->sm = 1; (ptr)->lv = 1;} while(0) /**@brief Set sec_mode pointed to by ptr to require encryption, but no MITM protection.*/ #define BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 2;} while(0) /**@brief Set sec_mode pointed to by ptr to require encryption and MITM protection.*/ #define BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 3;} while(0) /**@brief Set sec_mode pointed to by ptr to require LESC encryption and MITM protection.*/ #define BLE_GAP_CONN_SEC_MODE_SET_LESC_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 4;} while(0) /**@brief Set sec_mode pointed to by ptr to require signing or encryption, no MITM protection needed.*/ #define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 1;} while(0) /**@brief Set sec_mode pointed to by ptr to require signing or encryption with MITM protection.*/ #define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 2;} while(0) /**@} */ /**@brief GAP Security Random Number Length. */ #define BLE_GAP_SEC_RAND_LEN 8 /**@brief GAP Security Key Length. */ #define BLE_GAP_SEC_KEY_LEN 16 /**@brief GAP LE Secure Connections Elliptic Curve Diffie-Hellman P-256 Public Key Length. */ #define BLE_GAP_LESC_P256_PK_LEN 64 /**@brief GAP LE Secure Connections Elliptic Curve Diffie-Hellman DHKey Length. */ #define BLE_GAP_LESC_DHKEY_LEN 32 /**@brief GAP Passkey Length. */ #define BLE_GAP_PASSKEY_LEN 6 /**@brief Maximum amount of addresses in a whitelist. */ #define BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8) /**@brief Maximum amount of IRKs in a whitelist. * @note The number of IRKs is limited to 8, even if the hardware supports more. */ #define BLE_GAP_WHITELIST_IRK_MAX_COUNT (8) /**@defgroup GAP_SEC_MODES GAP Security Modes * @{ */ #define BLE_GAP_SEC_MODE 0x00 /**< No key (may be used to reject). */ /**@} */ /** @} */ /**@addtogroup BLE_GAP_STRUCTURES Structures * @{ */ /** * @brief BLE GAP initialization parameters. */ typedef struct { uint8_t periph_conn_count; /**< Number of connections acting as a peripheral */ uint8_t central_conn_count; /**< Number of connections acting as a central */ uint8_t central_sec_count; /**< Number of SMP instances for all connections acting as a central. */ } ble_gap_enable_params_t; /**@brief Bluetooth Low Energy address. */ typedef struct { uint8_t addr_type; /**< See @ref BLE_GAP_ADDR_TYPES. */ uint8_t addr[BLE_GAP_ADDR_LEN]; /**< 48-bit address, LSB format. */ } ble_gap_addr_t; /**@brief GAP connection parameters. * * @note When ble_conn_params_t is received in an event, both min_conn_interval and * max_conn_interval will be equal to the connection interval set by the central. * * @note If both conn_sup_timeout and max_conn_interval are specified, then the following constraint applies: * conn_sup_timeout * 4 > (1 + slave_latency) * max_conn_interval * that corresponds to the following Bluetooth Spec requirement: * The Supervision_Timeout in milliseconds shall be larger than * (1 + Conn_Latency) * Conn_Interval_Max * 2, where Conn_Interval_Max is given in milliseconds. */ typedef struct { uint16_t min_conn_interval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/ uint16_t max_conn_interval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/ uint16_t slave_latency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/ uint16_t conn_sup_timeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/ } ble_gap_conn_params_t; /**@brief GAP connection security modes. * * Security Mode 0 Level 0: No access permissions at all (this level is not defined by the Bluetooth Core specification).\n * Security Mode 1 Level 1: No security is needed (aka open link).\n * Security Mode 1 Level 2: Encrypted link required, MITM protection not necessary.\n * Security Mode 1 Level 3: MITM protected encrypted link required.\n * Security Mode 1 Level 4: LESC MITM protected encrypted link required.\n * Security Mode 2 Level 1: Signing or encryption required, MITM protection not necessary.\n * Security Mode 2 Level 2: MITM protected signing required, unless link is MITM protected encrypted.\n */ typedef struct { uint8_t sm : 4; /**< Security Mode (1 or 2), 0 for no permissions at all. */ uint8_t lv : 4; /**< Level (1, 2, 3 or 4), 0 for no permissions at all. */ } ble_gap_conn_sec_mode_t; /**@brief GAP connection security status.*/ typedef struct { ble_gap_conn_sec_mode_t sec_mode; /**< Currently active security mode for this connection.*/ uint8_t encr_key_size; /**< Length of currently active encryption key, 7 to 16 octets (only applicable for bonding procedures). */ } ble_gap_conn_sec_t; /**@brief Identity Resolving Key. */ typedef struct { uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Array containing IRK. */ } ble_gap_irk_t; /**@brief Whitelist structure. */ typedef struct { ble_gap_addr_t **pp_addrs; /**< Pointer to an array of device address pointers, pointing to addresses to be used in whitelist. NULL if none are given. */ uint8_t addr_count; /**< Count of device addresses in array, up to @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. */ ble_gap_irk_t **pp_irks; /**< Pointer to an array of Identity Resolving Key (IRK) pointers, each pointing to an IRK in the whitelist. NULL if none are given. */ uint8_t irk_count; /**< Count of IRKs in array, up to @ref BLE_GAP_WHITELIST_IRK_MAX_COUNT. */ } ble_gap_whitelist_t; /**@brief Channel mask for RF channels used in advertising. */ typedef struct { uint8_t ch_37_off : 1; /**< Setting this bit to 1 will turn off advertising on channel 37 */ uint8_t ch_38_off : 1; /**< Setting this bit to 1 will turn off advertising on channel 38 */ uint8_t ch_39_off : 1; /**< Setting this bit to 1 will turn off advertising on channel 39 */ } ble_gap_adv_ch_mask_t; /**@brief GAP advertising parameters.*/ typedef struct { uint8_t type; /**< See @ref BLE_GAP_ADV_TYPES. */ ble_gap_addr_t *p_peer_addr; /**< For @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND mode only, known peer address. */ uint8_t fp; /**< Filter Policy, see @ref BLE_GAP_ADV_FILTER_POLICIES. */ ble_gap_whitelist_t *p_whitelist; /**< Pointer to whitelist, NULL if no whitelist or the current active whitelist is to be used. */ uint16_t interval; /**< Advertising interval between 0x0020 and 0x4000 in 0.625 ms units (20ms to 10.24s), see @ref BLE_GAP_ADV_INTERVALS. - If type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND, this parameter must be set to 0 for high duty cycle directed advertising. - If type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND, set @ref BLE_GAP_ADV_INTERVAL_MIN <= interval <= @ref BLE_GAP_ADV_INTERVAL_MAX for low duty cycle advertising.*/ uint16_t timeout; /**< Advertising timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. See also @ref BLE_GAP_ADV_TIMEOUT_VALUES. If type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND, this parameter must be set to 0 for High duty cycle directed advertising. */ ble_gap_adv_ch_mask_t channel_mask; /**< Advertising channel mask. See @ref ble_gap_adv_ch_mask_t. */ } ble_gap_adv_params_t; /**@brief GAP scanning parameters. */ typedef struct { uint8_t active : 1; /**< If 1, perform active scanning (scan requests). */ uint8_t selective : 1; /**< If 1, ignore unknown devices (non whitelisted). */ ble_gap_whitelist_t * p_whitelist; /**< Pointer to whitelist, NULL if no whitelist or the current active whitelist is to be used. */ uint16_t interval; /**< Scan interval between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s). */ uint16_t window; /**< Scan window between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s). */ uint16_t timeout; /**< Scan timeout between 0x0001 and 0xFFFF in seconds, 0x0000 disables timeout. */ } ble_gap_scan_params_t; /** @brief Keys that can be exchanged during a bonding procedure. */ typedef struct { uint8_t enc : 1; /**< Long Term Key and Master Identification. */ uint8_t id : 1; /**< Identity Resolving Key and Identity Address Information. */ uint8_t sign : 1; /**< Connection Signature Resolving Key. */ uint8_t link : 1; /**< Derive the Link Key from the LTK. */ } ble_gap_sec_kdist_t; /**@brief GAP security parameters. */ typedef struct { uint8_t bond : 1; /**< Perform bonding. */ uint8_t mitm : 1; /**< Enable Man In The Middle protection. */ uint8_t lesc : 1; /**< Enable LE Secure Connection pairing. */ uint8_t keypress : 1; /**< Enable generation of keypress notifications. */ uint8_t io_caps : 3; /**< IO capabilities, see @ref BLE_GAP_IO_CAPS. */ uint8_t oob : 1; /**< Out Of Band data available. */ uint8_t min_key_size; /**< Minimum encryption key size in octets between 7 and 16. If 0 then not applicable in this instance. */ uint8_t max_key_size; /**< Maximum encryption key size in octets between min_key_size and 16. */ ble_gap_sec_kdist_t kdist_own; /**< Key distribution bitmap: keys that the local device will distribute. */ ble_gap_sec_kdist_t kdist_peer; /**< Key distribution bitmap: keys that the remote device will distribute. */ } ble_gap_sec_params_t; /**@brief GAP Encryption Information. */ typedef struct { uint8_t ltk[BLE_GAP_SEC_KEY_LEN]; /**< Long Term Key. */ uint8_t lesc : 1; /**< Key generated using LE Secure Connections. */ uint8_t auth : 1; /**< Authenticated Key. */ uint8_t ltk_len : 6; /**< LTK length in octets. */ } ble_gap_enc_info_t; /**@brief GAP Master Identification. */ typedef struct { uint16_t ediv; /**< Encrypted Diversifier. */ uint8_t rand[BLE_GAP_SEC_RAND_LEN]; /**< Random Number. */ } ble_gap_master_id_t; /**@brief GAP Signing Information. */ typedef struct { uint8_t csrk[BLE_GAP_SEC_KEY_LEN]; /**< Connection Signature Resolving Key. */ } ble_gap_sign_info_t; /**@brief GAP LE Secure Connections P-256 Public Key. */ typedef struct { uint8_t pk[BLE_GAP_LESC_P256_PK_LEN]; /**< LE Secure Connections Elliptic Curve Diffie-Hellman P-256 Public Key. Stored in the standard SMP protocol format: {X,Y} both in little-endian. */ } ble_gap_lesc_p256_pk_t; /**@brief GAP LE Secure Connections DHKey. */ typedef struct { uint8_t key[BLE_GAP_LESC_DHKEY_LEN]; /**< LE Secure Connections Elliptic Curve Diffie-Hellman Key. Stored in little-endian. */ } ble_gap_lesc_dhkey_t; /**@brief GAP LE Secure Connections OOB data. */ typedef struct { ble_gap_addr_t addr; /**< Bluetooth address of the device. */ uint8_t r[BLE_GAP_SEC_KEY_LEN]; /**< Random Number. */ uint8_t c[BLE_GAP_SEC_KEY_LEN]; /**< Confirm Value. */ } ble_gap_lesc_oob_data_t; /**@brief Event structure for @ref BLE_GAP_EVT_CONNECTED. */ typedef struct { ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */ ble_gap_addr_t own_addr; /**< Bluetooth address of the local device used during connection setup. */ uint8_t role; /**< BLE role for this connection, see @ref BLE_GAP_ROLES */ uint8_t irk_match :1; /**< If 1, peer device's address resolved using an IRK. */ uint8_t irk_match_idx :7; /**< Index in IRK list where the address was matched. */ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ } ble_gap_evt_connected_t; /**@brief Event structure for @ref BLE_GAP_EVT_DISCONNECTED. */ typedef struct { uint8_t reason; /**< HCI error code, see @ref BLE_HCI_STATUS_CODES. */ } ble_gap_evt_disconnected_t; /**@brief Event structure for @ref BLE_GAP_EVT_CONN_PARAM_UPDATE. */ typedef struct { ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ } ble_gap_evt_conn_param_update_t; /**@brief Event structure for @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST. */ typedef struct { ble_gap_sec_params_t peer_params; /**< Initiator Security Parameters. */ } ble_gap_evt_sec_params_request_t; /**@brief Event structure for @ref BLE_GAP_EVT_SEC_INFO_REQUEST. */ typedef struct { ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */ ble_gap_master_id_t master_id; /**< Master Identification for LTK lookup. */ uint8_t enc_info : 1; /**< If 1, Encryption Information required. */ uint8_t id_info : 1; /**< If 1, Identity Information required. */ uint8_t sign_info : 1; /**< If 1, Signing Information required. */ } ble_gap_evt_sec_info_request_t; /**@brief Event structure for @ref BLE_GAP_EVT_PASSKEY_DISPLAY. */ typedef struct { uint8_t passkey[BLE_GAP_PASSKEY_LEN]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */ uint8_t match_request : 1; /**< If 1 requires the application to report the match using @ref sd_ble_gap_auth_key_reply with either @ref BLE_GAP_AUTH_KEY_TYPE_NONE if there is no match or @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY if there is a match. */ } ble_gap_evt_passkey_display_t; /**@brief Event structure for @ref BLE_GAP_EVT_KEY_PRESSED. */ typedef struct { uint8_t kp_not; /**< Keypress notification type, see @ref BLE_GAP_KP_NOT_TYPES. */ } ble_gap_evt_key_pressed_t; /**@brief Event structure for @ref BLE_GAP_EVT_AUTH_KEY_REQUEST. */ typedef struct { uint8_t key_type; /**< See @ref BLE_GAP_AUTH_KEY_TYPES. */ } ble_gap_evt_auth_key_request_t; /**@brief Event structure for @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST. */ typedef struct { ble_gap_lesc_p256_pk_t *p_pk_peer; /**< LE Secure Connections remote P-256 Public Key. This will point to the application-supplied memory inside the keyset during the call to @ref sd_ble_gap_sec_params_reply. */ uint8_t oobd_req :1; /**< LESC OOB data required. A call to @ref sd_ble_gap_lesc_oob_data_set is required to complete the procedure. */ } ble_gap_evt_lesc_dhkey_request_t; /**@brief Security levels supported. * @note See Bluetooth Specification Version 4.2 Volume 3, Part C, Chapter 10, Section 10.2.1. */ typedef struct { uint8_t lv1 : 1; /**< If 1: Level 1 is supported. */ uint8_t lv2 : 1; /**< If 1: Level 2 is supported. */ uint8_t lv3 : 1; /**< If 1: Level 3 is supported. */ uint8_t lv4 : 1; /**< If 1: Level 4 is supported. */ } ble_gap_sec_levels_t; /**@brief Encryption Key. */ typedef struct { ble_gap_enc_info_t enc_info; /**< Encryption Information. */ ble_gap_master_id_t master_id; /**< Master Identification. */ } ble_gap_enc_key_t; /**@brief Identity Key. */ typedef struct { ble_gap_irk_t id_info; /**< Identity Information. */ ble_gap_addr_t id_addr_info; /**< Identity Address Information. */ } ble_gap_id_key_t; /**@brief Security Keys. */ typedef struct { ble_gap_enc_key_t *p_enc_key; /**< Encryption Key, or NULL. */ ble_gap_id_key_t *p_id_key; /**< Identity Key, or NULL. */ ble_gap_sign_info_t *p_sign_key; /**< Signing Key, or NULL. */ ble_gap_lesc_p256_pk_t *p_pk; /**< LE Secure Connections P-256 Public Key. When in debug mode the application must use the value defined in the Core Bluetooth Specification v4.2 Vol.3, Part H, Section 2.3.5.6.1 */ } ble_gap_sec_keys_t; /**@brief Security key set for both local and peer keys. */ typedef struct { ble_gap_sec_keys_t keys_own; /**< Keys distributed by the local device. For LE Secure Connections the encryption key will be generated locally and will always be stored if bonding. */ ble_gap_sec_keys_t keys_peer; /**< Keys distributed by the remote device. For LE Secure Connections, p_enc_key must always be NULL. */ } ble_gap_sec_keyset_t; /**@brief Event structure for @ref BLE_GAP_EVT_AUTH_STATUS. */ typedef struct { uint8_t auth_status; /**< Authentication status, see @ref BLE_GAP_SEC_STATUS. */ uint8_t error_src : 2; /**< On error, source that caused the failure, see @ref BLE_GAP_SEC_STATUS_SOURCES. */ uint8_t bonded : 1; /**< Procedure resulted in a bond. */ ble_gap_sec_levels_t sm1_levels; /**< Levels supported in Security Mode 1. */ ble_gap_sec_levels_t sm2_levels; /**< Levels supported in Security Mode 2. */ ble_gap_sec_kdist_t kdist_own; /**< Bitmap stating which keys were exchanged (distributed) by the local device. If bonding with LE Secure Connections, the enc bit will be always set. */ ble_gap_sec_kdist_t kdist_peer; /**< Bitmap stating which keys were exchanged (distributed) by the remote device. If bonding with LE Secure Connections, the enc bit will never be set. */ } ble_gap_evt_auth_status_t; /**@brief Event structure for @ref BLE_GAP_EVT_CONN_SEC_UPDATE. */ typedef struct { ble_gap_conn_sec_t conn_sec; /**< Connection security level. */ } ble_gap_evt_conn_sec_update_t; /**@brief Event structure for @ref BLE_GAP_EVT_TIMEOUT. */ typedef struct { uint8_t src; /**< Source of timeout event, see @ref BLE_GAP_TIMEOUT_SOURCES. */ } ble_gap_evt_timeout_t; /**@brief Event structure for @ref BLE_GAP_EVT_RSSI_CHANGED. */ typedef struct { int8_t rssi; /**< Received Signal Strength Indication in dBm. */ } ble_gap_evt_rssi_changed_t; /**@brief Event structure for @ref BLE_GAP_EVT_ADV_REPORT. */ typedef struct { ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */ int8_t rssi; /**< Received Signal Strength Indication in dBm. */ uint8_t scan_rsp : 1; /**< If 1, the report corresponds to a scan response and the type field may be ignored. */ uint8_t type : 2; /**< See @ref BLE_GAP_ADV_TYPES. Only valid if the scan_rsp field is 0. */ uint8_t dlen : 5; /**< Advertising or scan response data length. */ uint8_t data[BLE_GAP_ADV_MAX_SIZE]; /**< Advertising or scan response data. */ } ble_gap_evt_adv_report_t; /**@brief Event structure for @ref BLE_GAP_EVT_SEC_REQUEST. */ typedef struct { uint8_t bond : 1; /**< Perform bonding. */ uint8_t mitm : 1; /**< Man In The Middle protection requested. */ uint8_t lesc : 1; /**< LE Secure Connections requested. */ uint8_t keypress : 1; /**< Generation of keypress notifications requested. */ } ble_gap_evt_sec_request_t; /**@brief Event structure for @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST. */ typedef struct { ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */ } ble_gap_evt_conn_param_update_request_t; /**@brief Event structure for @ref BLE_GAP_EVT_SCAN_REQ_REPORT. */ typedef struct { int8_t rssi; /**< Received Signal Strength Indication in dBm. */ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */ } ble_gap_evt_scan_req_report_t; /**@brief GAP event structure. */ typedef struct { uint16_t conn_handle; /**< Connection Handle on which event occurred. */ union /**< union alternative identified by evt_id in enclosing struct. */ { ble_gap_evt_connected_t connected; /**< Connected Event Parameters. */ ble_gap_evt_disconnected_t disconnected; /**< Disconnected Event Parameters. */ ble_gap_evt_conn_param_update_t conn_param_update; /**< Connection Parameter Update Parameters. */ ble_gap_evt_sec_params_request_t sec_params_request; /**< Security Parameters Request Event Parameters. */ ble_gap_evt_sec_info_request_t sec_info_request; /**< Security Information Request Event Parameters. */ ble_gap_evt_passkey_display_t passkey_display; /**< Passkey Display Event Parameters. */ ble_gap_evt_key_pressed_t key_pressed; /**< Key Pressed Event Parameters. */ ble_gap_evt_auth_key_request_t auth_key_request; /**< Authentication Key Request Event Parameters. */ ble_gap_evt_lesc_dhkey_request_t lesc_dhkey_request; /**< LE Secure Connections DHKey calculation request. */ ble_gap_evt_auth_status_t auth_status; /**< Authentication Status Event Parameters. */ ble_gap_evt_conn_sec_update_t conn_sec_update; /**< Connection Security Update Event Parameters. */ ble_gap_evt_timeout_t timeout; /**< Timeout Event Parameters. */ ble_gap_evt_rssi_changed_t rssi_changed; /**< RSSI Event parameters. */ ble_gap_evt_adv_report_t adv_report; /**< Advertising Report Event Parameters. */ ble_gap_evt_sec_request_t sec_request; /**< Security Request Event Parameters. */ ble_gap_evt_conn_param_update_request_t conn_param_update_request; /**< Connection Parameter Update Parameters. */ ble_gap_evt_scan_req_report_t scan_req_report; /**< Scan Request Report parameters. */ } params; /**< Event Parameters. */ } ble_gap_evt_t; /**@brief Channel Map option. * Used with @ref sd_ble_opt_get to get the current channel map * or @ref sd_ble_opt_set to set a new channel map. When setting the * channel map, it applies to all current and future connections. When getting the * current channel map, it applies to a single connection and the connection handle * must be supplied. * * @note Setting the channel map may take some time, depending on connection parameters. * The time taken may be different for each connection and the get operation will * return the previous channel map until the new one has taken effect. * * @note After setting the channel map, by spec it can not be set again until at least 1 s has passed. * See Bluetooth Specification Version 4.1 Volume 2, Part E, Section 7.3.46. * * @retval ::NRF_SUCCESS Get or set successful. * @retval ::NRF_ERROR_BUSY Channel map was set again before enough time had passed. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied for get. * @retval ::NRF_ERROR_NOT_SUPPORTED Returned by sd_ble_opt_set in peripheral-only SoftDevices. * */ typedef struct { uint16_t conn_handle; /**< Connection Handle (only applicable for get) */ uint8_t ch_map[5]; /**< Channel Map (37-bit). */ } ble_gap_opt_ch_map_t; /**@brief Local connection latency option. * * Local connection latency is a feature which enables the slave to improve * current consumption by ignoring the slave latency set by the peer. The * local connection latency can only be set to a multiple of the slave latency, * and cannot be longer than half of the supervision timeout. * * Used with @ref sd_ble_opt_set to set the local connection latency. The * @ref sd_ble_opt_get is not supported for this option, but the actual * local connection latency (unless set to NULL) is set as a return parameter * when setting the option. * * @note The latency set will be truncated down to the closest slave latency event * multiple, or the nearest multiple before half of the supervision timeout. * * @note The local connection latency is disabled by default, and needs to be enabled for new * connections and whenever the connection is updated. * * @retval ::NRF_SUCCESS Set successfully. * @retval ::NRF_ERROR_NOT_SUPPORTED Get is not supported. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter. */ typedef struct { uint16_t conn_handle; /**< Connection Handle */ uint16_t requested_latency; /**< Requested local connection latency. */ uint16_t * p_actual_latency; /**< Pointer to storage for the actual local connection latency (can be set to NULL to skip return value). */ } ble_gap_opt_local_conn_latency_t; /**@brief Passkey Option. * * Structure containing the passkey to be used during pairing. This can be used with @ref * sd_ble_opt_set to make the SoftDevice use a pre-programmed passkey for authentication * instead of generating a random one. * * @note @ref sd_ble_opt_get is not supported for this option. * */ typedef struct { uint8_t * p_passkey; /**< Pointer to 6-digit ASCII string (digit 0..9 only, no NULL termination) passkey to be used during pairing. If this is NULL, the SoftDevice will generate a random passkey if required.*/ } ble_gap_opt_passkey_t; /**@brief Custom Privacy Option. * * This structure is used with both @ref sd_ble_opt_set (as input) and with * @ref sd_ble_opt_get (as output). * * Structure containing: * - A pointer to an IRK to set (if input), or a place to store a read IRK (if output). * - A private address refresh cycle. * * @note The specified address cycle interval is used when the address cycle mode is * @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO. If 0 is given, the address will not be automatically * refreshed at all. The default interval is @ref BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S. * * @note If the current address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO, the address will immediately be * refreshed when a custom privacy option is set. A new address can be generated manually by calling * @ref sd_ble_gap_address_set with the same type again. * * @note If the IRK is updated, the new IRK becomes the one to be distributed in all * bonding procedures performed after @ref sd_ble_opt_set returns. * * @retval ::NRF_SUCCESS Set or read successfully. * @retval ::NRF_ERROR_INVALID_ADDR The pointer to IRK storage is invalid. */ typedef struct { ble_gap_irk_t * p_irk; /**< When input: Pointer to custom IRK, or NULL to use/reset to the device's default IRK. When output: Pointer to where the current IRK is to be stored, or NULL to not read out the IRK. */ uint16_t interval_s; /**< When input: Custom private address cycle interval in seconds. When output: The current private address cycle interval. */ } ble_gap_opt_privacy_t; /**@brief Scan request report option. * * This can be used with @ref sd_ble_opt_set to make the SoftDevice send * @ref BLE_GAP_EVT_SCAN_REQ_REPORT events. * * @note Due to the limited space reserved for scan request report events, * not all received scan requests will be reported. * * @note If whitelisting is used, only whitelisted requests are reported. * * @retval ::NRF_SUCCESS Set successfully. * @retval ::NRF_ERROR_INVALID_STATE When advertising is ongoing while the option is set. */ typedef struct { uint8_t enable : 1; /**< Enable scan request reports. */ } ble_gap_opt_scan_req_report_t; /**@brief Compatibility mode option. * * This can be used with @ref sd_ble_opt_set to enable and disable * compatibility modes. Compatibility modes are disabled by default. * * @note Compatibility mode 1 enables interoperability with devices that do not support * a value of 0 for the WinOffset parameter in the Link Layer CONNECT_REQ packet. * * @retval ::NRF_SUCCESS Set successfully. * @retval ::NRF_ERROR_INVALID_STATE When connection creation is ongoing while mode 1 is set. */ typedef struct { uint8_t mode_1_enable : 1; /**< Enable compatibility mode 1.*/ } ble_gap_opt_compat_mode_t; /**@brief Option structure for GAP options. */ typedef union { ble_gap_opt_ch_map_t ch_map; /**< Parameters for the Channel Map option. */ ble_gap_opt_local_conn_latency_t local_conn_latency; /**< Parameters for the Local connection latency option */ ble_gap_opt_passkey_t passkey; /**< Parameters for the Passkey option.*/ ble_gap_opt_privacy_t privacy; /**< Parameters for the Custom privacy option. */ ble_gap_opt_scan_req_report_t scan_req_report; /**< Parameters for the scan request report option.*/ ble_gap_opt_compat_mode_t compat_mode; /**< Parameters for the compatibility mode option.*/ } ble_gap_opt_t; /**@} */ /**@addtogroup BLE_GAP_FUNCTIONS Functions * @{ */ /**@brief Set local Bluetooth address. * * @note If the address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO, the address type is required to * be @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE or * @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE. The given address is ignored and the * SoftDevice will generate a new private address automatically every * @ref BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S seconds. If this API * call is used again with the same parameters, the SoftDevice will immediately * generate a new private address to replace the current address. * * @note If the application wishes to use a @ref BLE_GAP_ADDR_TYPE_PUBLIC or * @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC address, the cycle mode must be * @ref BLE_GAP_ADDR_CYCLE_MODE_NONE. * * @note By default the SoftDevice will set an address of type @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC upon being * enabled. The address is a random number populated during the IC manufacturing process and remains unchanged * for the lifetime of each IC. * * @note If this API function is called while advertising or scanning, the softdevice will immediately update the * advertising or scanning address without the need to stop the procedure in the following cases: * - If the previously set address is of type @ref BLE_GAP_ADDR_TYPE_PUBLIC and the new address * is also of type @ref BLE_GAP_ADDR_TYPE_PUBLIC * - If the previously set address is not @ref BLE_GAP_ADDR_TYPE_PUBLIC and the new address is * also not @ref BLE_GAP_ADDR_TYPE_PUBLIC. * If the address is changed from a @ref BLE_GAP_ADDR_TYPE_PUBLIC address to another type or from * another type to a @ref BLE_GAP_ADDR_TYPE_PUBLIC address, the change will take effect the next * time an advertising or scanning procedure is started. * * @note If the address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_NONE and the application is * using privacy, the application must take care to generate and set new private addresses * periodically to comply with the Privacy specification in Bluetooth Core Spec. * * @mscs * @mmsc{@ref BLE_GAP_ADV_MSC} * @endmscs * * @param[in] addr_cycle_mode Address cycle mode, see @ref BLE_GAP_ADDR_CYCLE_MODES. * @param[in] p_addr Pointer to address structure. * * @retval ::NRF_SUCCESS Address successfully set. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameters. * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address. * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. */ SVCALL(SD_BLE_GAP_ADDRESS_SET, uint32_t, sd_ble_gap_address_set(uint8_t addr_cycle_mode, ble_gap_addr_t const *p_addr)); /**@brief Get local Bluetooth address. * * @param[out] p_addr Pointer to address structure to be filled in. * * @retval ::NRF_SUCCESS Address successfully retrieved. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. */ SVCALL(SD_BLE_GAP_ADDRESS_GET, uint32_t, sd_ble_gap_address_get(ble_gap_addr_t *p_addr)); /**@brief Set, clear or update advertising and scan response data. * * @note The format of the advertising data will be checked by this call to ensure interoperability. * Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and * duplicating the local name in the advertising data and scan response data. * * @note To clear the advertising data and set it to a 0-length packet, simply provide a valid pointer (p_data/p_sr_data) with its corresponding * length (dlen/srdlen) set to 0. * * @note The call will fail if p_data and p_sr_data are both NULL since this would have no effect. * * @mscs * @mmsc{@ref BLE_GAP_ADV_MSC} * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} * @endmscs * * @param[in] p_data Raw data to be placed in advertising packet. If NULL, no changes are made to the current advertising packet data. * @param[in] dlen Data length for p_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_data is NULL, can be 0 if p_data is not NULL. * @param[in] p_sr_data Raw data to be placed in scan response packet. If NULL, no changes are made to the current scan response packet data. * @param[in] srdlen Data length for p_sr_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_sr_data is NULL, can be 0 if p_data is not NULL. * * @retval ::NRF_SUCCESS Advertising data successfully updated or cleared. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, both p_data and p_sr_data cannot be NULL. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied. * @retval ::NRF_ERROR_INVALID_DATA Invalid data type(s) supplied, check the advertising data format specification. * @retval ::NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied. * @retval ::NRF_ERROR_NOT_SUPPORTED Unsupported data type. * @retval ::BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied. */ SVCALL(SD_BLE_GAP_ADV_DATA_SET, uint32_t, sd_ble_gap_adv_data_set(uint8_t const *p_data, uint8_t dlen, uint8_t const *p_sr_data, uint8_t srdlen)); /**@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). * * @note An application can start an advertising procedure for broadcasting purposes while a connection * is active. After a @ref BLE_GAP_EVT_CONNECTED event is received, this function may therefore * be called to start a broadcast advertising procedure. The advertising procedure * cannot however be connectable (it must be of type @ref BLE_GAP_ADV_TYPE_ADV_SCAN_IND or * @ref BLE_GAP_ADV_TYPE_ADV_NONCONN_IND). @note Only one advertiser may be active at any time. * * @note To use the currently active whitelist set p_adv_params->p_whitelist to NULL. * * @events * @event{@ref BLE_GAP_EVT_CONNECTED, Generated after connection has been established through connectable advertising.} * @event{@ref BLE_GAP_EVT_TIMEOUT, Advertisement has timed out.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_ADV_MSC} * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} * @endmscs * * @param[in] p_adv_params Pointer to advertising parameters structure. * * @retval ::NRF_SUCCESS The BLE stack has started advertising. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::NRF_ERROR_CONN_COUNT The limit of available connections has been reached; connectable advertiser cannot be started. * @retval ::NRF_ERROR_NO_MEM The configured memory pools (see @ref ble_conn_bw_counts_t) are not large enough for the * bandwidth selected for this connection. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check the accepted ranges and limits. * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Bluetooth address supplied. * @retval ::BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible. * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. * @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE Unable to replace the whitelist while another operation is using it. * @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available. * Stop one or more currently active roles (Central, Peripheral or Observer) and try again */ SVCALL(SD_BLE_GAP_ADV_START, uint32_t, sd_ble_gap_adv_start(ble_gap_adv_params_t const *p_adv_params)); /**@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure). * * @mscs * @mmsc{@ref BLE_GAP_ADV_MSC} * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} * @endmscs * * @retval ::NRF_SUCCESS The BLE stack has stopped advertising. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation (most probably not in advertising state). */ SVCALL(SD_BLE_GAP_ADV_STOP, uint32_t, sd_ble_gap_adv_stop(void)); /**@brief Update connection parameters. * * @details In the central role this will initiate a Link Layer connection parameter update procedure, * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for * the central to perform the procedure. In both cases, and regardless of success or failure, the application * will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event. * * @details This function can be used as a central both to reply to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST or to start the procedure unrequested. * * @events * @event{@ref BLE_GAP_EVT_CONN_PARAM_UPDATE, Result of the connection parameter update procedure.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_CPU_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} * @mmsc{@ref BLE_GAP_MULTILINK_CPU_MSC} * @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_CPU_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role, * the parameters in the PPCP characteristic of the GAP service will be used instead. * If NULL is provided on a central role and in response to a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST, the peripheral request will be rejected * * @retval ::NRF_SUCCESS The Connection Update procedure has been started successfully. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, process pending events and wait for pending procedures to complete and retry. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::NRF_ERROR_NO_MEM Not enough memory to complete operation. */ SVCALL(SD_BLE_GAP_CONN_PARAM_UPDATE, uint32_t, sd_ble_gap_conn_param_update(uint16_t conn_handle, ble_gap_conn_params_t const *p_conn_params)); /**@brief Disconnect (GAP Link Termination). * * @details This call initiates the disconnection procedure, and its completion will be communicated to the application * with a @ref BLE_GAP_EVT_DISCONNECTED event. * * @events * @event{@ref BLE_GAP_EVT_DISCONNECTED, Generated when disconnection procedure is complete.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_CONN_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are @ref BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION and @ref BLE_HCI_CONN_INTERVAL_UNACCEPTABLE). * * @retval ::NRF_SUCCESS The disconnection procedure has been started successfully. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation (disconnection is already in progress). */ SVCALL(SD_BLE_GAP_DISCONNECT, uint32_t, sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code)); /**@brief Set the radio's transmit power. * * @param[in] tx_power Radio transmit power in dBm (accepted values are -40, -30, -20, -16, -12, -8, -4, 0, and 4 dBm). * * @note The -30dBm setting is only available on nRF51 series ICs. * @note The -40dBm setting is only available on nRF52 series ICs. * * @retval ::NRF_SUCCESS Successfully changed the transmit power. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. */ SVCALL(SD_BLE_GAP_TX_POWER_SET, uint32_t, sd_ble_gap_tx_power_set(int8_t tx_power)); /**@brief Set GAP Appearance value. * * @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES. * * @retval ::NRF_SUCCESS Appearance value set successfully. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. */ SVCALL(SD_BLE_GAP_APPEARANCE_SET, uint32_t, sd_ble_gap_appearance_set(uint16_t appearance)); /**@brief Get GAP Appearance value. * * @param[out] p_appearance Pointer to appearance (16-bit) to be filled in, see @ref BLE_APPEARANCES. * * @retval ::NRF_SUCCESS Appearance value retrieved successfully. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. */ SVCALL(SD_BLE_GAP_APPEARANCE_GET, uint32_t, sd_ble_gap_appearance_get(uint16_t *p_appearance)); /**@brief Set GAP Peripheral Preferred Connection Parameters. * * @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters. * * @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. */ SVCALL(SD_BLE_GAP_PPCP_SET, uint32_t, sd_ble_gap_ppcp_set(ble_gap_conn_params_t const *p_conn_params)); /**@brief Get GAP Peripheral Preferred Connection Parameters. * * @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored. * * @retval ::NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. */ SVCALL(SD_BLE_GAP_PPCP_GET, uint32_t, sd_ble_gap_ppcp_get(ble_gap_conn_params_t *p_conn_params)); /**@brief Set GAP device name. * * @param[in] p_write_perm Write permissions for the Device Name characteristic, see @ref ble_gap_conn_sec_mode_t. * @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string. * @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN). * * @retval ::NRF_SUCCESS GAP device name and permissions set successfully. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. */ SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const *p_write_perm, uint8_t const *p_dev_name, uint16_t len)); /**@brief Get GAP device name. * * @note If the device name is longer than the size of the supplied buffer, * p_len will return the complete device name length, * and not the number of bytes actually returned in p_dev_name. * The application may use this information to allocate a suitable buffer size. * * @param[out] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length. * @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output. * * @retval ::NRF_SUCCESS GAP device name retrieved successfully. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_DATA_SIZE Invalid data size(s) supplied. */ SVCALL(SD_BLE_GAP_DEVICE_NAME_GET, uint32_t, sd_ble_gap_device_name_get(uint8_t *p_dev_name, uint16_t *p_len)); /**@brief Initiate the GAP Authentication procedure. * * @details In the central role, this function will send an SMP Pairing Request (or an SMP Pairing Failed if rejected), * otherwise in the peripheral role, an SMP Security Request will be sent. * * @events * @event{Depending on the security parameters set and the packet exchanges with the peer\, the following events may be generated:} * @event{@ref BLE_GAP_EVT_SEC_PARAMS_REQUEST} * @event{@ref BLE_GAP_EVT_SEC_INFO_REQUEST} * @event{@ref BLE_GAP_EVT_PASSKEY_DISPLAY} * @event{@ref BLE_GAP_EVT_KEY_PRESSED} * @event{@ref BLE_GAP_EVT_AUTH_KEY_REQUEST} * @event{@ref BLE_GAP_EVT_LESC_DHKEY_REQUEST} * @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE} * @event{@ref BLE_GAP_EVT_AUTH_STATUS} * @event{@ref BLE_GAP_EVT_TIMEOUT} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_SEC_REQ_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing or bonding procedure. * In the peripheral role, only the bond, mitm, lesc and keypress fields of this structure are used. * In the central role, this pointer may be NULL to reject a Security Request. * * @retval ::NRF_SUCCESS Successfully initiated authentication procedure. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. * @retval ::NRF_ERROR_NO_MEM The maximum number of authentication procedures that can run in parallel for the given role is reached. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported. * @retval ::NRF_ERROR_TIMEOUT A SMP timeout has occurred, and further SMP operations on this link is prohibited. */ SVCALL(SD_BLE_GAP_AUTHENTICATE, uint32_t, sd_ble_gap_authenticate(uint16_t conn_handle, ble_gap_sec_params_t const *p_sec_params)); /**@brief Reply with GAP security parameters. * * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. * * @events * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_PERIPH_BONDING_JW_MSC} * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_PERIPH_MSC} * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC} * @mmsc{@ref BLE_GAP_PERIPH_BONDING_STATIC_PK_MSC} * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_CONFIRM_FAIL_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_KS_TOO_SMALL_MSC} * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_APP_ERROR_MSC} * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_REMOTE_PAIRING_FAIL_MSC} * @mmsc{@ref BLE_GAP_PERIPH_PAIRING_TIMEOUT_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS. * @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure. In the central role this must be set to NULL, as the parameters have * already been provided during a previous call to @ref sd_ble_gap_authenticate. * @param[in,out] p_sec_keyset Pointer to a @ref ble_gap_sec_keyset_t security keyset structure. Any keys generated and/or distributed as a result of the ongoing security procedure * will be stored into the memory referenced by the pointers inside this structure. The keys will be stored and available to the application * upon reception of a @ref BLE_GAP_EVT_AUTH_STATUS event. * Note that the SoftDevice expects the application to provide memory for storing the * peer's keys. So it must be ensured that the relevant pointers inside this structure are not NULL. The pointers to the local key * can, however, be NULL, in which case, the local key data will not be available to the application upon reception of the * @ref BLE_GAP_EVT_AUTH_STATUS event. * * @retval ::NRF_SUCCESS Successfully accepted security parameter from the application. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::NRF_ERROR_NOT_SUPPORTED Setting of sign or link fields in @ref ble_gap_sec_kdist_t not supported. */ SVCALL(SD_BLE_GAP_SEC_PARAMS_REPLY, uint32_t, sd_ble_gap_sec_params_reply(uint16_t conn_handle, uint8_t sec_status, ble_gap_sec_params_t const *p_sec_params, ble_gap_sec_keyset_t const *p_sec_keyset)); /**@brief Reply with an authentication key. * * @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST or a @ref BLE_GAP_EVT_PASSKEY_DISPLAY, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. * * @events * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_BONDING_PK_PERIPH_OOB_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES. * @param[in] p_key If key type is @ref BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL. * If key type is @ref BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination) * or NULL when confirming LE Secure Connections Numeric Comparison. * If key type is @ref BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in Little Endian format. * * @retval ::NRF_SUCCESS Authentication key successfully set. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_AUTH_KEY_REPLY, uint32_t, sd_ble_gap_auth_key_reply(uint16_t conn_handle, uint8_t key_type, uint8_t const *p_key)); /**@brief Reply with an LE Secure connections DHKey. * * @details This function is only used to reply to a @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST, calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. * * @events * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_LESC_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_PD_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_PAIRING_JW_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_NC_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_PD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] p_dhkey LE Secure Connections DHKey. * * @retval ::NRF_SUCCESS DHKey successfully set. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_LESC_DHKEY_REPLY, uint32_t, sd_ble_gap_lesc_dhkey_reply(uint16_t conn_handle, ble_gap_lesc_dhkey_t const *p_dhkey)); /**@brief Notify the peer of a local keypress. * * @details This function can only be used when an authentication procedure using LE Secure Connection is in progress. Calling it at other times will result in an @ref NRF_ERROR_INVALID_STATE. * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_PKE_CD_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_PKE_CD_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] kp_not See @ref BLE_GAP_KP_NOT_TYPES. * * @retval ::NRF_SUCCESS Keypress notification successfully queued for transmission. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. Either not entering a passkey or keypresses have not been enabled by both peers. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::NRF_ERROR_BUSY The BLE stack is busy. Retry at later time. */ SVCALL(SD_BLE_GAP_KEYPRESS_NOTIFY, uint32_t, sd_ble_gap_keypress_notify(uint16_t conn_handle, uint8_t kp_not)); /**@brief Generate a set of OOB data to send to a peer out of band. * * @note The @ref ble_gap_addr_t included in the OOB data returned will be the currently active one (or, if a connection has already been established, * the one used during connection setup). The application may manually overwrite it with an updated value. * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} * @endmscs * * @param[in] conn_handle Connection handle. Can be BLE_CONN_HANDLE_INVALID if a BLE connection has not been established yet. * @param[in] p_pk_own LE Secure Connections local P-256 Public Key. * @param[out] p_oobd_own The OOB data to be sent out of band to a peer. * * @retval ::NRF_SUCCESS OOB data successfully generated. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_LESC_OOB_DATA_GET, uint32_t, sd_ble_gap_lesc_oob_data_get(uint16_t conn_handle, ble_gap_lesc_p256_pk_t const *p_pk_own, ble_gap_lesc_oob_data_t *p_oobd_own)); /**@brief Provide the OOB data sent/received out of band. * * @note At least one of the 2 pointers provided must be different from NULL. * @note An authentication procedure with OOB selected as an algorithm must be in progress when calling this function. * @note A @ref BLE_GAP_EVT_LESC_DHKEY_REQUEST event with the oobd_req set to 1 must have been received prior to calling this function. * * @events * @event{This function is used during authentication procedures\, see the list of events in the documentation of @ref sd_ble_gap_authenticate.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_LESC_BONDING_OOB_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_LESC_BONDING_OOB_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] p_oobd_own The OOB data sent out of band to a peer or NULL if none sent. * @param[in] p_oobd_peer The OOB data received out of band from a peer or NULL if none received. * * @retval ::NRF_SUCCESS OOB data accepted. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_LESC_OOB_DATA_SET, uint32_t, sd_ble_gap_lesc_oob_data_set(uint16_t conn_handle, ble_gap_lesc_oob_data_t const *p_oobd_own, ble_gap_lesc_oob_data_t const *p_oobd_peer)); /**@brief Initiate GAP Encryption procedure. * * @details In the central role, this function will initiate the encryption procedure using the encryption information provided. * * @events * @event{@ref BLE_GAP_EVT_CONN_SEC_UPDATE, The connection security has been updated.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_CENTRAL_ENC_AUTH_MUTEX_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_ENC_MSC} * @mmsc{@ref BLE_GAP_MULTILINK_CTRL_PROC_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_SEC_REQ_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] p_master_id Pointer to a @ref ble_gap_master_id_t master identification structure. * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. * * @retval ::NRF_SUCCESS Successfully initiated authentication procedure. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::BLE_ERROR_INVALID_ROLE Operation is not supported in the Peripheral role. * @retval ::NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, wait for pending procedures to complete and retry. */ SVCALL(SD_BLE_GAP_ENCRYPT, uint32_t, sd_ble_gap_encrypt(uint16_t conn_handle, ble_gap_master_id_t const *p_master_id, ble_gap_enc_info_t const *p_enc_info)); /**@brief Reply with GAP security information. * * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in @ref NRF_ERROR_INVALID_STATE. * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters. * @note Data signing is not yet supported, and p_sign_info must therefore be NULL. * * @mscs * @mmsc{@ref BLE_GAP_PERIPH_ENC_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available. * @param[in] p_id_info Pointer to a @ref ble_gap_irk_t identity information structure. May be NULL to signal none is available. * @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available. * * @retval ::NRF_SUCCESS Successfully accepted security information. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_SEC_INFO_REPLY, uint32_t, sd_ble_gap_sec_info_reply(uint16_t conn_handle, ble_gap_enc_info_t const *p_enc_info, ble_gap_irk_t const *p_id_info, ble_gap_sign_info_t const *p_sign_info)); /**@brief Get the current connection security. * * @param[in] conn_handle Connection handle. * @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in. * * @retval ::NRF_SUCCESS Current connection security successfully retrieved. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_CONN_SEC_GET, uint32_t, sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t *p_conn_sec)); /**@brief Start reporting the received signal strength to the application. * * A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called. * * @events * @event{@ref BLE_GAP_EVT_RSSI_CHANGED, New RSSI data available. How often the event is generated is dependent on the settings of the <code>threshold_dbm</code> and <code>skip_count</code> input parameters.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} * @mmsc{@ref BLE_GAP_RSSI_FILT_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[in] threshold_dbm Minimum change in dBm before triggering the @ref BLE_GAP_EVT_RSSI_CHANGED event. Events are disabled if threshold_dbm equals @ref BLE_GAP_RSSI_THRESHOLD_INVALID. * @param[in] skip_count Number of RSSI samples with a change of threshold_dbm or more before sending a new @ref BLE_GAP_EVT_RSSI_CHANGED event. * * @retval ::NRF_SUCCESS Successfully activated RSSI reporting. * @retval ::NRF_ERROR_INVALID_STATE Disconnection in progress. Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_RSSI_START, uint32_t, sd_ble_gap_rssi_start(uint16_t conn_handle, uint8_t threshold_dbm, uint8_t skip_count)); /**@brief Stop reporting the received signal strength. * * @note An RSSI change detected before the call but not yet received by the application * may be reported after @ref sd_ble_gap_rssi_stop has been called. * * @mscs * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} * @mmsc{@ref BLE_GAP_RSSI_FILT_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * * @retval ::NRF_SUCCESS Successfully deactivated RSSI reporting. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. */ SVCALL(SD_BLE_GAP_RSSI_STOP, uint32_t, sd_ble_gap_rssi_stop(uint16_t conn_handle)); /**@brief Get the received signal strength for the last connection event. * * @ref sd_ble_gap_rssi_start must be called to start reporting RSSI before using this function. @ref NRF_ERROR_NOT_FOUND * will be returned until RSSI was sampled for the first time after calling @ref sd_ble_gap_rssi_start. * * @mscs * @mmsc{@ref BLE_GAP_CENTRAL_RSSI_READ_MSC} * @endmscs * * @param[in] conn_handle Connection handle. * @param[out] p_rssi Pointer to the location where the RSSI measurement shall be stored. * * @retval ::NRF_SUCCESS Successfully read the RSSI. * @retval ::NRF_ERROR_NOT_FOUND No sample is available. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied. * @retval ::NRF_ERROR_INVALID_STATE RSSI reporting is not ongoing, or disconnection in progress. */ SVCALL(SD_BLE_GAP_RSSI_GET, uint32_t, sd_ble_gap_rssi_get(uint16_t conn_handle, int8_t *p_rssi)); /**@brief Start scanning (GAP Discovery procedure, Observer Procedure). * * @note To use the currently active whitelist set p_scan_params->p_whitelist to NULL. * * @events * @event{@ref BLE_GAP_EVT_ADV_REPORT, An advertising or scan response packet has been received.} * @event{@ref BLE_GAP_EVT_TIMEOUT, Scanner has timed out.} * @endevents * * @mscs * @mmsc{@ref BLE_GAP_SCAN_MSC} * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} * @endmscs * * @param[in] p_scan_params Pointer to scan parameters structure. * * @retval ::NRF_SUCCESS Successfully initiated scanning procedure. * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. * @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE Unable to replace the whitelist while another operation is using it. * @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available. * Stop one or more currently active roles (Central, Peripheral or Broadcaster) and try again */ SVCALL(SD_BLE_GAP_SCAN_START, uint32_t, sd_ble_gap_scan_start(ble_gap_scan_params_t const *p_scan_params)); /**@brief Stop scanning (GAP Discovery procedure, Observer Procedure). * * @mscs * @mmsc{@ref BLE_GAP_SCAN_MSC} * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} * @endmscs * * @retval ::NRF_SUCCESS Successfully stopped scanning procedure. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation (most probably not in scanning state). */ SVCALL(SD_BLE_GAP_SCAN_STOP, uint32_t, sd_ble_gap_scan_stop(void)); /**@brief Create a connection (GAP Link Establishment). * * @note To use the currently active whitelist set p_scan_params->p_whitelist to NULL. * @note If a scanning procedure is currently in progress it will be automatically stopped when calling this function. * * @mscs * @mmsc{@ref BLE_GAP_WL_SHARE_MSC} * @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC} * @endmscs * * @param[in] p_peer_addr Pointer to peer address. If the selective bit is set in @ref ble_gap_scan_params_t, then this must be NULL. * @param[in] p_scan_params Pointer to scan parameters structure. * @param[in] p_conn_params Pointer to desired connection parameters. * * @retval ::NRF_SUCCESS Successfully initiated connection procedure. * @retval ::NRF_ERROR_INVALID_ADDR Invalid parameter(s) pointer supplied. * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. * @retval ::BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Peer address. * @retval ::NRF_ERROR_CONN_COUNT The limit of available connections has been reached. * @retval ::NRF_ERROR_NO_MEM The configured memory pool (see @ref ble_conn_bw_counts_t) is not large enough for the * bandwidth selected for this connection. * @retval ::NRF_ERROR_BUSY The stack is busy, process pending events and retry. If another connection is being established * wait for the corresponding @ref BLE_GAP_EVT_CONNECTED event before calling again. * @retval ::BLE_ERROR_GAP_WHITELIST_IN_USE Unable to replace the whitelist while another operation is using it. * @retval ::NRF_ERROR_RESOURCES Not enough BLE role slots available. * Stop one or more currently active roles (Central, Peripheral or Broadcaster) and try again */ SVCALL(SD_BLE_GAP_CONNECT, uint32_t, sd_ble_gap_connect(ble_gap_addr_t const *p_peer_addr, ble_gap_scan_params_t const *p_scan_params, ble_gap_conn_params_t const *p_conn_params)); /**@brief Cancel a connection establishment. * * @mscs * @mmsc{@ref BLE_GAP_CENTRAL_CONN_MSC} * @endmscs * * @retval ::NRF_SUCCESS Successfully cancelled an ongoing connection procedure. * @retval ::NRF_ERROR_INVALID_STATE Invalid state to perform operation. */ SVCALL(SD_BLE_GAP_CONNECT_CANCEL, uint32_t, sd_ble_gap_connect_cancel(void)); /** @} */ #ifdef __cplusplus } #endif #endif // NRF_BLE_GAP_H__ /** @} */