Mouse code for the MacroRat
mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/TARGET_UBLOX_EVA_NINA/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
#ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 3 typedef enum { // nRF52 pin names p0 = 0, p1 = 1, p2 = 2, p3 = 3, p4 = 4, p5 = 5, p6 = 6, p7 = 7, p8 = 8, p9 = 9, p10 = 10, p11 = 11, p12 = 12, p13 = 13, p14 = 14, p15 = 15, p16 = 16, p17 = 17, p18 = 18, p19 = 19, p20 = 20, p21 = 21, p22 = 22, p23 = 23, p24 = 24, p25 = 25, p26 = 26, p27 = 27, p28 = 28, p29 = 29, p30 = 30, p31 = 31, NC = (int)0xFFFFFFFF, // Not connected //NINA-B1 module pin names NINA_B1_GPIO_1 = p8, NINA_B1_GPIO_2 = p11, NINA_B1_GPIO_3 = p12, NINA_B1_GPIO_4 = p13, NINA_B1_GPIO_5 = p14, NINA_B1_GPIO_7 = p16, NINA_B1_GPIO_8 = p18, NINA_B1_GPIO_16 = p28, NINA_B1_GPIO_17 = p29, NINA_B1_GPIO_18 = p30, NINA_B1_GPIO_20 = p31, NINA_B1_GPIO_21 = p7, NINA_B1_GPIO_22 = p6, NINA_B1_GPIO_23 = p5, NINA_B1_GPIO_24 = p2, NINA_B1_GPIO_25 = p3, NINA_B1_GPIO_27 = p4, NINA_B1_GPIO_28 = p9, NINA_B1_GPIO_29 = p10, // Board pins LED1 = NINA_B1_GPIO_7, // ORANGE LED2 = NC, LED3 = NC, LED4 = NC, // Nordic SDK pin names RX_PIN_NUMBER = p5, TX_PIN_NUMBER = p6, CTS_PIN_NUMBER = p7, RTS_PIN_NUMBER = p31, I2C_SDA0 = p2, I2C_SCL0 = p3, // mBed interface pins USBTX = TX_PIN_NUMBER, USBRX = RX_PIN_NUMBER } PinName; typedef enum { PullNone = 0, PullDown = 1, PullUp = 3, PullDefault = PullUp } PinMode; #ifdef __cplusplus } #endif #endif