Mouse code for the MacroRat
mbed-dev/targets/TARGET_Atmel/TARGET_SAM_CortexM0P/TARGET_SAMR21G18A/PeripheralNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-06-03
- Revision:
- 46:b156ef445742
- Parent:
- 18:6a4db94011d3
File content as of revision 46:b156ef445742:
/* mbed Microcontroller Library * Copyright (c) 2006-2015 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PERIPHERALNAMES_H #define MBED_PERIPHERALNAMES_H #include <compiler.h> #include "cmsis.h" #include "PinNames.h" #ifdef __cplusplus extern "C" { #endif #define _SERCOM_SPI_NAME(n, unused) \ SPI##n, #define _SERCOM_PAD_NAME(n, pad) \ SERCOM##n##_PAD##pad = ((n & 0xF) | ((pad & 0xF) << 4)), #define _SERCOM_I2C_NAME(n, unused) \ I2C##n, typedef enum { UART_0 = (int)0x42000800UL, // Base address of SERCOM0 UART_1 = (int)0x42000C00UL, // Base address of SERCOM1 UART_2 = (int)0x42001000UL, // Base address of SERCOM2 UART_3 = (int)0x42001400UL, // Base address of SERCOM3 UART_4 = (int)0x42001800UL, // Base address of SERCOM4 UART_5 = (int)0x42001C00UL // Base address of SERCOM5 } UARTName; typedef enum { // for each input control mux 4,5,6,7,16,17,10,11 used in R21 ADC_2 = 0x2ul, ADC_3 = 0x3ul, ADC_4 = 0x4ul, ADC_5 = 0x5ul, ADC_6 = 0x6ul, ADC_7 = 0x7ul, ADC_8 = 0x8ul, ADC_10 = 0xAul, ADC_11 = 0xBul, ADC_16 = 0x10ul, ADC_17 = 0x11ul, ADC_18 = 0x12ul, ADC_19 = 0x13ul } ADCName; typedef enum { // for each channel EXTINT_0 = 0, EXTINT_1, EXTINT_2, EXTINT_3, EXTINT_4, EXTINT_5, EXTINT_6, EXTINT_7, EXTINT_8, EXTINT_9, EXTINT_10, EXTINT_11, EXTINT_12, EXTINT_13, EXTINT_14, EXTINT_15 } EXTINTName; typedef enum { MREPEAT(SERCOM_INST_NUM, _SERCOM_SPI_NAME, ~) } SPIName; typedef enum { MREPEAT(SERCOM_INST_NUM, _SERCOM_I2C_NAME, ~) } I2CName; typedef enum { /* Pad 0 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 0) /* Pad 1 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 1) /* Pad 2 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 2) /* Pad 3 definitions */ MREPEAT(SERCOM_INST_NUM, _SERCOM_PAD_NAME, 3) } SercomPadName; typedef enum { PWM_0 = (0x42002000UL), /**< \brief (TCC0) APB Base Address */ PWM_1 = (0x42002400UL), /**< \brief (TCC1) APB Base Address */ PWM_2 = (0x42002800UL), /**< \brief (TCC2) APB Base Address */ } PWMName; struct pwm_pin_channel { PinName pin; PWMName pwm; uint8_t channel_index; }; #define STDIO_UART_TX USBTX #define STDIO_UART_RX USBRX #define STDIO_UART UART_0 // Default peripherals #define MBED_SPI0 PB22, PB02, PB23, PA14 #define MBED_UART0 PA04, PA05 #define MBED_UARTUSB USBTX, USBRX #define MBED_I2C0 PA16, PA17 #define MBED_ANALOGIN0 PA04 #define MBED_ANALOGIN1 PA05 #define MBED_ANALOGIN2 PA06 #define MBED_ANALOGIN3 PA07 #define MBED_ANALOGIN4 PB02 #define MBED_ANALOGIN5 PB03 #define MBED_ANALOGIN7 PA08 #define MBED_ANALOGIN8 PA09 #define MBED_PWMOUT0 PA18 #define MBED_PWMOUT1 PA19 #ifdef __cplusplus } #endif #endif