Mouse code for the MacroRat
mbed-dev/targets/TARGET_STM/TARGET_STM32F4/TARGET_UBLOX_EVK_ODIN_W2/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_0 = 0x30, PD_1 = 0x31, PD_2 = 0x32, PD_3 = 0x33, PD_4 = 0x34, PD_5 = 0x35, PD_6 = 0x36, PD_7 = 0x37, PD_8 = 0x38, PD_9 = 0x39, PD_10 = 0x3A, PD_11 = 0x3B, PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F, PE_0 = 0x40, PE_1 = 0x41, PE_2 = 0x42, PE_3 = 0x43, PE_4 = 0x44, PE_5 = 0x45, PE_6 = 0x46, PE_7 = 0x47, PE_8 = 0x48, PE_9 = 0x49, PE_10 = 0x4A, PE_11 = 0x4B, PE_12 = 0x4C, PE_13 = 0x4D, PE_14 = 0x4E, PE_15 = 0x4F, PF_0 = 0x50, PF_1 = 0x51, PF_2 = 0x52, PF_3 = 0x53, PF_4 = 0x54, PF_5 = 0x55, PF_6 = 0x56, PF_7 = 0x57, PF_8 = 0x58, PF_9 = 0x59, PF_10 = 0x5A, PF_11 = 0x5B, PF_12 = 0x5C, PF_13 = 0x5D, PF_14 = 0x5E, PF_15 = 0x5F, PG_0 = 0x60, PG_1 = 0x61, PG_2 = 0x62, PG_3 = 0x63, PG_4 = 0x64, PG_5 = 0x65, PG_6 = 0x66, PG_7 = 0x67, PG_8 = 0x68, PG_9 = 0x69, PG_10 = 0x6A, PG_11 = 0x6B, PG_12 = 0x6C, PG_13 = 0x6D, PG_14 = 0x6E, PG_15 = 0x6F, PH_0 = 0x70, PH_1 = 0x71, PH_2 = 0x72, PH_3 = 0x73, PH_4 = 0x74, PH_5 = 0x75, PH_6 = 0x76, PH_7 = 0x77, PH_8 = 0x78, PH_9 = 0x79, PH_10 = 0x7A, PH_11 = 0x7B, PH_12 = 0x7C, PH_13 = 0x7D, PH_14 = 0x7E, PH_15 = 0x7F, // Module Pins // A P_A5 = PC_2, // UART-DTR P_A6 = PF_2, // Switch-0 P_A7 = PE_0, // Red, Mode P_A8 = PB_6, // Green, Switch-1 P_A9 = PB_8, // Blue P_A10 = PA_11, // UART-CTS P_A11 = PA_9, // UART-TXD P_A12 = PA_12, // UART-RTS P_A13 = PA_10, // UART-RXD P_A14 = PD_9, // GPIO-0 P_A15 = PD_8, // GPIO-1 P_A16 = PD_11, // GPIO-2 P_A17 = PD_12, // GPIO-3 P_A18 = PA_3, // UART-DSR // B // C P_C5 = PG_4, // SPI-IRQ P_C6 = PE_13, // SPI-MISO P_C8 = PE_12, // Res P_C10 = PE_14, // SPI-MOSI P_C11 = PE_11, // SPI-CS0 P_C12 = PE_9, // Res P_C13 = PF_6, // GPIO-4 P_C14 = PC_1, // RMII-MDC P_C15 = PA_2, // RMII-MDIO P_C16 = PF_7, // GPIO-7 P_C17 = PF_1, // I2C-SCL P_C18 = PF_0, // I2C-SDA // D P_D1 = PB_12, // RMII-TXD0 P_D2 = PB_13, // RMII-TXD1 P_D3 = PB_11, // RMII-TXEN P_D4 = PA_7, // RMII-CRSDV P_D5 = PC_4, // RMII-RXD0 P_D6 = PC_5, // RMII-RXD1 P_D8 = PA_1, // RMII-REFCLK // TP P_TP5 = PB_4, // NTRST P_TP7 = PA_13, // TMS SWDIO P_TP8 = PA_15, // TDI P_TP9 = PA_14, // TCK SWCLK P_TP10 = PB_3, // TDO //P_TP11, // BOOT0 // Board Pins // A0-A5 A0 = PF_6, // AI4 A1 = PA_3, // AI3 A2 = PC_2, // AI12 A3 = PF_7, // LPOCLK, not AI A4 = PG_4, // not AI A5 = PE_0, // not AI // D0-D15 D0 = PD_9, // UART3-RX D1 = PD_8, // UART3-TX D2 = PA_10, // UART1-RX D3 = PA_11, // CAN1-RX D4 = PA_12, // CAN1-TX D5 = PB_8, D6 = PD_11, // UART3-CTS D7 = PD_12, // UART3-RTS D8 = PA_9, // UART1-TX D9 = PE_9, // SDCard-CS D10 = PE_11, // SSEL D11 = PE_14, // MOSI D12 = PE_13, // MISO D13 = PE_12, // SCK D14 = PF_0, // SDA D15 = PF_1, // SCL // Internal LED1 = PE_0, // Red / Mode LED2 = PB_6, // Green / Switch-1 LED3 = PB_8, // Blue LED4 = D10, SW0 = PF_2, // Switch-0 SW1 = PB_6, // Green / Switch-1 // ST-Link USBRX = PA_10, USBTX = PA_9, SWDIO = PA_15, SWCLK = PA_14, NTRST = PB_4, // Not connected NC = (int)0xFFFFFFFF } PinName; #ifdef __cplusplus } #endif #endif