Mouse code for the MacroRat
mbed-dev/targets/TARGET_STM/TARGET_STM32F4/TARGET_STM32F412xG/TARGET_NUCLEO_F412ZG/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2016 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_0 = 0x30, PD_1 = 0x31, PD_2 = 0x32, PD_3 = 0x33, PD_4 = 0x34, PD_5 = 0x35, PD_6 = 0x36, PD_7 = 0x37, PD_8 = 0x38, PD_9 = 0x39, PD_10 = 0x3A, PD_11 = 0x3B, PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F, PE_0 = 0x40, PE_1 = 0x41, PE_2 = 0x42, PE_3 = 0x43, PE_4 = 0x44, PE_5 = 0x45, PE_6 = 0x46, PE_7 = 0x47, PE_8 = 0x48, PE_9 = 0x49, PE_10 = 0x4A, PE_11 = 0x4B, PE_12 = 0x4C, PE_13 = 0x4D, PE_14 = 0x4E, PE_15 = 0x4F, PF_0 = 0x50, PF_1 = 0x51, PF_2 = 0x52, PF_3 = 0x53, PF_4 = 0x54, PF_5 = 0x55, PF_6 = 0x56, PF_7 = 0x57, PF_8 = 0x58, PF_9 = 0x59, PF_10 = 0x5A, PF_11 = 0x5B, PF_12 = 0x5C, PF_13 = 0x5D, PF_14 = 0x5E, PF_15 = 0x5F, PG_0 = 0x60, PG_1 = 0x61, PG_2 = 0x62, PG_3 = 0x63, PG_4 = 0x64, PG_5 = 0x65, PG_6 = 0x66, PG_7 = 0x67, PG_8 = 0x68, PG_9 = 0x69, PG_10 = 0x6A, PG_11 = 0x6B, PG_12 = 0x6C, PG_13 = 0x6D, PG_14 = 0x6E, PG_15 = 0x6F, PH_0 = 0x70, PH_1 = 0x71, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, ADC_VBAT = 0xF2, // Arduino connector namings A0 = PA_3, A1 = PC_0, A2 = PC_3, A3 = PC_1, A4 = PC_4, A5 = PC_5, D0 = PG_9, D1 = PG_14, D2 = PF_15, D3 = PE_13, D4 = PF_14, D5 = PE_11, D6 = PE_9, D7 = PF_13, D8 = PF_12, D9 = PD_15, D10 = PD_14, D11 = PA_7, D12 = PA_6, D13 = PA_5, D14 = PB_9, D15 = PB_8, // Generic signals namings LED1 = PB_0, LED2 = PB_7, LED3 = PB_14, LED4 = LED1, LED_RED = LED1, USER_BUTTON = PC_13, // Standardized button names BUTTON1 = USER_BUTTON, SERIAL_TX = PD_8, SERIAL_RX = PD_9, USBTX = SERIAL_TX, USBRX = SERIAL_RX, I2C_SCL = D15, I2C_SDA = D14, SPI_MOSI = D11, SPI_MISO = D12, SPI_SCK = D13, SPI_CS = D10, PWM_OUT = D9, // Not connected NC = (int)0xFFFFFFFF } PinName; #ifdef __cplusplus } #endif #endif