Mouse code for the MacroRat
mbed-dev/targets/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2014, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, PC_15 = 0x2F, PD_2 = 0x32, PH_0 = 0x70, PH_1 = 0x71, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, ADC_VBAT = 0xF2, // Generic signals namings XBEE_DOUT = PA_2, XBEE_DIN = PA_3, XBEE_AD0 = PB_1, XBEE_AD1 = PB_0, XBEE_AD2 = PA_5, XBEE_AD3 = PA_4, XBEE_AD4 = PA_7, XBEE_AD5 = PC_1, XBEE_AD6 = PA_1, XBEE_DIO0 = PB_1, XBEE_DIO1 = PB_0, XBEE_DIO2 = PA_5, XBEE_DIO3 = PA_4, XBEE_DIO4 = PA_7, XBEE_DIO5 = PC_1, XBEE_DIO6 = PA_1, XBEE_DIO7 = PA_0, XBEE_DO8 = PA_6, XBEE_DI8 = PA_11, XBEE_PWM0 = PA_8, XBEE_PWM1 = PC_9, XBEE_CTS = PA_0, XBEE_RTS = PA_1, XBEE_DTR = PA_11, XBEE_RSSI = PA_8, XBEE_SLEEPRQ = PA_11, XBEE_ON_SLEEP = PC_13, XBEE_ASSOCIATE = PC_1, XBEE_USB_RES = PA_12, // needed for mbed to build tests LED1 = PA_0, LED2 = PA_0, LED3 = PA_0, LED4 = PA_0, // XBEE_DOUT/DIN, RS232 port on UDK board SERIAL_TX = PA_2, SERIAL_RX = PA_3, // DB_TX/RX, USB port on UDK board DB_TX = PA_9, DB_RX = PA_10, USBTX = PA_9, USBRX = PA_10, // Multiplexed with XBEE pins I2C_SCL = PA_8, I2C_SDA = PC_9, SPI1_MOSI = PA_7, SPI1_MISO = PA_6, SPI1_SCK = PA_5, SPI1_CS = PA_4, // SPI flash SPI3_MOSI = PC_12, SPI3_MISO = PC_11, SPI3_SCK = PC_10, SPI3_CS = PC_6, FLASH_HOLD = PC_7, FLASH_WP = PC_8, // LoRa LORA_RESET = PC_0, LORA_RXCTL = PC_2, LORA_TXCTL = PC_3, LORA_DIO0 = PB_5, LORA_DIO1 = PB_6, LORA_DIO2 = PB_7, LORA_DIO3 = PB_8, LORA_DIO4 = PB_9, LORA_DIO5 = PB_10, // LoRa/SPI2 LORA_NSS = PB_12, LORA_SCK = PB_13, LORA_MISO = PB_14, LORA_MOSI = PB_15, // UART pins UART_TX = PA_2, UART_RX = PA_3, UART_CTS = PA_0, UART_RTS = PA_1, // SPI pins SPI_MOSI = PA_7, SPI_MISO = PA_6, SPI_SCK = PA_5, SPI_NSS = PA_4, // UDK2 pins A0 = PB_1, A1 = PB_0, A2 = PC_1, D0 = PA_3, D1 = PA_2, D2 = PC_13, D3 = PA_0, D6 = PA_1, D7 = PA_11, D10 = PA_4, D11 = PA_7, D12 = PA_6, D13 = PA_5, D14 = PC_9, D15 = PA_8, // mDot GPIO pins GPIO0 = PB_1, GPIO1 = PB_0, GPIO2 = PA_5, GPIO3 = PA_4, GPIO4 = PA_1, GPIO5 = PA_0, GPIO6 = PA_7, GPIO7 = PA_6, ASSOCIATE = PC_1, ON_SLEEP = PC_13, SLEEPRQ = PA_11, RSSI = PA_8, JTAG_SWCLK = PA_14, JTAG_SWIO = PA_13, JTAG_NRST = PB_4, JTAG_SWO = PB_3, // Not connected NC = (int)0xFFFFFFFF } PinName; #ifdef __cplusplus } #endif #endif