Mouse code for the MacroRat
mbed-dev/targets/TARGET_NXP/TARGET_LPC82X/TARGET_LPC824/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PIN_SHIFT 8 typedef enum { // LPC824 Pin Names (PIN[11:8] + IOCON offset[7:0]) P0_0 = ( 0 << PIN_SHIFT) | 0x44, P0_1 = ( 1 << PIN_SHIFT) | 0x2C, P0_2 = ( 2 << PIN_SHIFT) | 0x18, P0_3 = ( 3 << PIN_SHIFT) | 0x14, P0_4 = ( 4 << PIN_SHIFT) | 0x10, P0_5 = ( 5 << PIN_SHIFT) | 0x0C, P0_6 = ( 6 << PIN_SHIFT) | 0x40, P0_7 = ( 7 << PIN_SHIFT) | 0x3C, P0_8 = ( 8 << PIN_SHIFT) | 0x38, P0_9 = ( 9 << PIN_SHIFT) | 0x34, P0_10 = (10 << PIN_SHIFT) | 0x20, P0_11 = (11 << PIN_SHIFT) | 0x1C, P0_12 = (12 << PIN_SHIFT) | 0x08, P0_13 = (13 << PIN_SHIFT) | 0x04, P0_14 = (14 << PIN_SHIFT) | 0x48, P0_15 = (15 << PIN_SHIFT) | 0x28, P0_16 = (16 << PIN_SHIFT) | 0x24, P0_17 = (17 << PIN_SHIFT) | 0x00, P0_18 = (18 << PIN_SHIFT) | 0x78, P0_19 = (19 << PIN_SHIFT) | 0x74, P0_20 = (20 << PIN_SHIFT) | 0x70, P0_21 = (21 << PIN_SHIFT) | 0x6C, P0_22 = (22 << PIN_SHIFT) | 0x68, P0_23 = (23 << PIN_SHIFT) | 0x64, P0_24 = (24 << PIN_SHIFT) | 0x60, P0_25 = (25 << PIN_SHIFT) | 0x5C, P0_26 = (26 << PIN_SHIFT) | 0x58, P0_27 = (27 << PIN_SHIFT) | 0x54, P0_28 = (28 << PIN_SHIFT) | 0x50, D0 = P0_0, D1 = P0_4, D2 = P0_19, D3 = P0_12, // LED_RED D4 = P0_18, D5 = P0_28, D6 = P0_16, // LED_GREEN D7 = P0_17, D8 = P0_13, D9 = P0_27, // LED_BLUE D10 = P0_15, D11 = P0_26, D12 = P0_25, D13 = P0_24, D14 = P0_11, D15 = P0_10, A0 = P0_6, A1 = P0_14, A2 = P0_23, A3 = P0_22, A4 = P0_21, A5 = P0_20, // LPC824-MAX board LED_RED = P0_12, LED_GREEN = P0_16, LED_BLUE = P0_27, // mbed original LED naming LED1 = LED_RED, LED2 = LED_GREEN, LED3 = LED_BLUE, LED4 = LED_BLUE, // Serial to USB pins USBTX = P0_7, USBRX = P0_18, // I2C pins SCL = P0_10, SDA = P0_11, I2C_SCL = P0_10, I2C_SDA = P0_11, // Not connected NC = (int)0xFFFFFFFF, } PinName; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #define STDIO_UART_TX USBTX #define STDIO_UART_RX USBRX typedef struct { unsigned char n; unsigned char offset; } SWM_Map; #ifdef __cplusplus } #endif #endif