Mouse code for the MacroRat
mbed-dev/targets/TARGET_NXP/TARGET_LPC2460/device/system_LPC24xx.c
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (C) 2008-2015 ARM Limited. All rights reserved. * * ARM7 version of CMSIS-like functionality - not advised for use outside mbed! */ #include <stdint.h> #include "LPC24xx.h" #define CLOCK_SETUP 1 #define SCS_Val ((1<<4) | (1 << 5)) #define CLKSRCSEL_Val 0x00000001 #define PLL0_SETUP 1 #define PLL0CFG_Val 0x0000000B #define CCLKCFG_Val 0x00000003 #define USBCLKCFG_Val 0x00000005 #define PCLKSEL0_Val 0x00000000 #define PCLKSEL1_Val 0x00000000 #define PCONP_Val (1 << PCEMC) #define CLKOUTCFG_Val 0x00000000 #define MAMCR_Val 0x00000002 #define MAMTIM_Val 0x00000004 /*---------------------------------------------------------------------------- DEFINES *----------------------------------------------------------------------------*/ #define XTAL (12000000UL) /* Oscillator frequency */ #define OSC_CLK ( XTAL) /* Main oscillator frequency */ #define RTC_CLK ( 32000UL) /* RTC oscillator frequency */ #define IRC_OSC ( 4000000UL) /* Internal RC oscillator frequency */ /* F_cco0 = (2 * M * F_in) / N */ #define __M (((PLL0CFG_Val ) & 0x7FFF) + 1) #define __N (((PLL0CFG_Val >> 16) & 0x00FF) + 1) #define __FCCO(__F_IN) ((2 * __M * __F_IN) / __N) #define __CCLK_DIV (((CCLKCFG_Val ) & 0x00FF) + 1) /* Determine core clock frequency according to settings */ #if (PLL0_SETUP) #if ((CLKSRCSEL_Val & 0x03) == 1) #define __CORE_CLK (__FCCO(OSC_CLK) / __CCLK_DIV) #elif ((CLKSRCSEL_Val & 0x03) == 2) #define __CORE_CLK (__FCCO(RTC_CLK) / __CCLK_DIV) #else #define __CORE_CLK (__FCCO(IRC_OSC) / __CCLK_DIV) #endif #endif /*---------------------------------------------------------------------------- Clock Variable definitions *----------------------------------------------------------------------------*/ uint32_t SystemCoreClock = __CORE_CLK;/*!< System Clock Frequency (Core Clock)*/ /*---------------------------------------------------------------------------- Clock functions *----------------------------------------------------------------------------*/ void SystemCoreClockUpdate (void) /* Get Core Clock Frequency */ { /* Determine clock frequency according to clock register values */ if (((LPC_SC->PLL0STAT >> 24) & 3) == 3) { /* If PLL0 enabled and connected */ switch (LPC_SC->CLKSRCSEL & 0x03) { case 0: /* Int. RC oscillator => PLL0 */ case 3: /* Reserved, default to Int. RC */ SystemCoreClock = (IRC_OSC * (((2 * ((LPC_SC->PLL0STAT & 0x7FFF) + 1))) / (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)) / ((LPC_SC->CCLKCFG & 0xFF)+ 1)); break; case 1: /* Main oscillator => PLL0 */ SystemCoreClock = (OSC_CLK * (((2 * ((LPC_SC->PLL0STAT & 0x7FFF) + 1))) / (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)) / ((LPC_SC->CCLKCFG & 0xFF)+ 1)); break; case 2: /* RTC oscillator => PLL0 */ SystemCoreClock = (RTC_CLK * (((2 * ((LPC_SC->PLL0STAT & 0x7FFF) + 1))) / (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)) / ((LPC_SC->CCLKCFG & 0xFF)+ 1)); break; } } else { switch (LPC_SC->CLKSRCSEL & 0x03) { case 0: /* Int. RC oscillator => PLL0 */ case 3: /* Reserved, default to Int. RC */ SystemCoreClock = IRC_OSC / ((LPC_SC->CCLKCFG & 0xFF)+ 1); break; case 1: /* Main oscillator => PLL0 */ SystemCoreClock = OSC_CLK / ((LPC_SC->CCLKCFG & 0xFF)+ 1); break; case 2: /* RTC oscillator => PLL0 */ SystemCoreClock = RTC_CLK / ((LPC_SC->CCLKCFG & 0xFF)+ 1); break; } } } void vectorRemap() { #define ARM_VECTOR_REBASE (0x40000000) extern unsigned long __privileged_code_start__; /* Startup code address from linker */ int i; /* Copy ARM vector table into internal RAM */ for (i = 0; i <= 56; i+=2) { *(unsigned short *)(ARM_VECTOR_REBASE + i) = *(unsigned short *)((unsigned long)(&__privileged_code_start__) + i); } // *(unsigned long *)(ARM_VECTOR_REBASE) = (unsigned long)armUnexpReset; /* Remap the interrupt vectors to RAM */ LPC_SC->MEMMAP = 2; } /** * Initialize the system * * @param none * @return none * * @brief Setup the microcontroller system. * Initialize the System and update the SystemFrequency variable. */ void SystemInit (void) { LPC_WDT->WDMOD = 0; /* Disable internal watchdog */ #if (CLOCK_SETUP) /* Clock Setup */ LPC_SC->SCS = SCS_Val; if (SCS_Val & (1 << 5)) { /* If Main Oscillator is enabled */ while ((LPC_SC->SCS & (1 << 6)) == 0); /* Wait for Oscillator to be ready */ } LPC_SC->CCLKCFG = CCLKCFG_Val; /* Setup Clock Divider */ #if (PLL0_SETUP) LPC_SC->CLKSRCSEL = CLKSRCSEL_Val; /* Select Clock Source for PLL0 */ LPC_SC->PLL0CFG = PLL0CFG_Val; LPC_SC->PLL0CON = 0x01; /* PLL0 Enable */ LPC_SC->PLL0FEED = 0xAA; LPC_SC->PLL0FEED = 0x55; while (!(LPC_SC->PLL0STAT & (1 << 26))); /* Wait for PLOCK0 */ LPC_SC->PLL0CON = 0x03; /* PLL0 Enable & Connect */ LPC_SC->PLL0FEED = 0xAA; LPC_SC->PLL0FEED = 0x55; #endif LPC_SC->USBCLKCFG = USBCLKCFG_Val; /* Setup USB Clock Divider */ #endif LPC_SC->PCLKSEL0 = PCLKSEL0_Val; /* Peripheral Clock Selection */ LPC_SC->PCLKSEL1 = PCLKSEL1_Val; LPC_SC->PCONP = PCONP_Val; /* Power Control for Peripherals */ // Setup MAM LPC_SC->MAMTIM = MAMTIM_Val; LPC_SC->MAMCR = MAMCR_Val; vectorRemap(); }