Mouse code for the MacroRat
mbed-dev/targets/TARGET_NXP/TARGET_LPC11U6X/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2006-2014 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 16 #define PIN_SHIFT 9 typedef enum { // LPC11U68 Pin Names (PORT[19:16] + PIN[15:9] + IOCON offset[8:0]) P0_0 = (0 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x000, P0_1 = (0 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x004, P0_2 = (0 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x008, P0_3 = (0 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x00C, P0_4 = (0 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x010, P0_5 = (0 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x014, P0_6 = (0 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x018, P0_7 = (0 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x01C, P0_8 = (0 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x020, P0_9 = (0 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x024, P0_10= (0 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x028, P0_11= (0 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x02C, P0_12= (0 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x030, P0_13= (0 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x034, P0_14= (0 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x038, P0_15= (0 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x03C, P0_16= (0 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x040, P0_17= (0 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x044, P0_18= (0 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x048, P0_19= (0 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x04C, P0_20= (0 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x050, P0_21= (0 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x054, P0_22= (0 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x058, P0_23= (0 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x05C, P1_0 = (1 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x060, P1_1 = (1 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x064, P1_2 = (1 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x068, P1_3 = (1 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x06C, P1_4 = (1 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x070, P1_5 = (1 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x074, P1_6 = (1 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x078, P1_7 = (1 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x07C, P1_8 = (1 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x080, P1_9 = (1 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x084, P1_10= (1 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x088, P1_11= (1 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x08C, P1_12= (1 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x090, P1_13= (1 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x094, P1_14= (1 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x098, P1_15= (1 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x09C, P1_16= (1 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x0A0, P1_17= (1 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x0A4, P1_18= (1 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x0A8, P1_19= (1 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x0AC, P1_20= (1 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x0B0, P1_21= (1 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x0B4, P1_22= (1 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x0B8, P1_23= (1 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x0BC, P1_24= (1 << PORT_SHIFT) | (24<< PIN_SHIFT) | 0x0C0, P1_25= (1 << PORT_SHIFT) | (25<< PIN_SHIFT) | 0x0C4, P1_26= (1 << PORT_SHIFT) | (26<< PIN_SHIFT) | 0x0C8, P1_27= (1 << PORT_SHIFT) | (27<< PIN_SHIFT) | 0x0CC, P1_28= (1 << PORT_SHIFT) | (28<< PIN_SHIFT) | 0x0D0, P1_29= (1 << PORT_SHIFT) | (29<< PIN_SHIFT) | 0x0D4, P1_30= (1 << PORT_SHIFT) | (30<< PIN_SHIFT) | 0x0D8, P1_31= (1 << PORT_SHIFT) | (31<< PIN_SHIFT) | 0x0DC, P2_0 = (2 << PORT_SHIFT) | (0 << PIN_SHIFT) | 0x0F0, P2_1 = (2 << PORT_SHIFT) | (1 << PIN_SHIFT) | 0x0F4, P2_2 = (2 << PORT_SHIFT) | (2 << PIN_SHIFT) | 0x0FC, P2_3 = (2 << PORT_SHIFT) | (3 << PIN_SHIFT) | 0x100, P2_4 = (2 << PORT_SHIFT) | (4 << PIN_SHIFT) | 0x104, P2_5 = (2 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x108, P2_6 = (2 << PORT_SHIFT) | (6 << PIN_SHIFT) | 0x10C, P2_7 = (2 << PORT_SHIFT) | (7 << PIN_SHIFT) | 0x110, P2_8 = (2 << PORT_SHIFT) | (8 << PIN_SHIFT) | 0x114, P2_9 = (2 << PORT_SHIFT) | (9 << PIN_SHIFT) | 0x118, P2_10= (2 << PORT_SHIFT) | (10<< PIN_SHIFT) | 0x11C, P2_11= (2 << PORT_SHIFT) | (11<< PIN_SHIFT) | 0x120, P2_12= (2 << PORT_SHIFT) | (12<< PIN_SHIFT) | 0x124, P2_13= (2 << PORT_SHIFT) | (13<< PIN_SHIFT) | 0x128, P2_14= (2 << PORT_SHIFT) | (14<< PIN_SHIFT) | 0x12C, P2_15= (2 << PORT_SHIFT) | (15<< PIN_SHIFT) | 0x130, P2_16= (2 << PORT_SHIFT) | (16<< PIN_SHIFT) | 0x134, P2_17= (2 << PORT_SHIFT) | (17<< PIN_SHIFT) | 0x138, P2_18= (2 << PORT_SHIFT) | (18<< PIN_SHIFT) | 0x13C, P2_19= (2 << PORT_SHIFT) | (19<< PIN_SHIFT) | 0x140, P2_20= (2 << PORT_SHIFT) | (20<< PIN_SHIFT) | 0x144, P2_21= (2 << PORT_SHIFT) | (21<< PIN_SHIFT) | 0x148, P2_22= (2 << PORT_SHIFT) | (22<< PIN_SHIFT) | 0x14C, P2_23= (2 << PORT_SHIFT) | (23<< PIN_SHIFT) | 0x150, LED_RED = P2_17, LED_GREEN = P2_16, LED_BLUE = P2_18, // mbed original LED naming LED1 = LED_RED, LED2 = LED_GREEN, LED3 = LED_BLUE, LED4 = LED_BLUE, // Serial to USB pins USBTX = P0_19, USBRX = P0_18, // Arduino Shield Receptacles Names D0 = P0_18, D1 = P0_19, D2 = P1_18, D3 = P1_24, D4 = P1_19, D5 = P1_26, D6 = P1_27, D7 = P1_25, D8 = P1_28, D9 = P2_3, D10= P0_2, D11= P0_9, D12= P0_8, D13= P1_29, D14= P0_5, D15= P0_4, A0 = P1_9, A1 = P0_14, A2 = P0_13, A3 = P0_12, A4 = P0_5, // same port as SDA A5 = P0_4, // same port as SCL SDA= P0_5, // same port as A4 SCL= P0_4, // same port as A5 // Not connected NC = (int)0xFFFFFFFF, } PinName; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #define STDIO_UART_TX USBTX #define STDIO_UART_RX USBRX #define STDIO_UART UART_0 #ifdef __cplusplus } #endif #endif