Mouse code for the MacroRat
mbed-dev/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_cap.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/**************************************************************************//** * @file cap.h * @version V0.10 * $Revision: 16 $ * $Date: 14/05/29 1:13p $ * @brief NUC470 series Image Capture Driver Header File * * @note * Copyright (C) 2013 Nuvoton Technology Corp. All rights reserved. * ******************************************************************************/ #ifndef __CAP_H__ #define __CAP_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver @{ */ /** @addtogroup NUC472_442_CAP_Driver CAP Driver @{ */ /** @addtogroup NUC472_442_CAP_EXPORTED_CONSTANTS CAP Exported Constants @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* VINCTRL constant definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define CAP_CTL_CAPEN (1ul<<CAP_CTL_CAPEN_Pos) /*!< CAP CTL setting for enabling capture engine mode \hideinitializer */ #define CAP_CTL_ADDRSW (1ul<<CAP_CTL_ADDRSW_Pos) /*!< CAP CTL setting for packet buffer address switch \hideinitializer */ #define CAP_CTL_PKTEN (1ul<<CAP_CTL_PKTEN_Pos) /*!< CAP CTL setting for enabling packet output mode \hideinitializer */ #define CAP_CTL_PLNEN (1ul<<CAP_CTL_PLNEN_Pos) /*!< CAP CTL setting for enabling planar output mode \hideinitializer */ #define CAP_CTL_SHUTTER (1ul<<CAP_CTL_SHUTTER_Pos) /*!< CAP CTL setting for enabling shutter mode \hideinitializer */ #define CAP_CTL_UPDATE (1ul<<CAP_CTL_UPDATE_Pos) /*!< CAP CTL setting for enabling update register at new frame \hideinitializer */ #define CAP_CTL_RESET (1ul<<CAP_CTL_VPRST_Pos) /*!< CAP CTL setting for capture reset \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* CAPPAR constant definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define CAP_PAR_INFMT_YUV422 (0ul<<CAP_PAR_INFMT_Pos) /*!< CAP PAR setting for Sensor Input Data YUV422 Format \hideinitializer */ #define CAP_PAR_INFMT_RGB565 (1ul<<CAP_PAR_INFMT_Pos) /*!< CAP PAR setting for Sensor Input Data RGB565 Format \hideinitializer */ #define CAP_PAR_SENTYPE_CCIR601 (0ul<<CAP_PAR_SENTYPE_Pos) /*!< CAP PAR setting for Sensor Input CCIR601 Type \hideinitializer */ #define CAP_PAR_SENTYPE_CCIR656 (1ul<<CAP_PAR_SENTYPE_Pos) /*!< CAP PAR setting for Sensor Input CCIR656 Type \hideinitializer */ #define CAP_PAR_INDATORD_YUYV (0x0ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, YUYV \hideinitializer */ #define CAP_PAR_INDATORD_YVYU (0x1ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, YVYU \hideinitializer */ #define CAP_PAR_INDATORD_UYVY (0x2ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, UYVY \hideinitializer */ #define CAP_PAR_INDATORD_VYUY (0x3ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, VYUY \hideinitializer */ #define CAP_PAR_INDATORD_RGGB (0x0ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: R[0:4] G[5:8], 1byte G[0:2] R[3:8] \hideinitializer */ #define CAP_PAR_INDATORD_BGGR (0x1ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: b[0:4] G[5:8], 1byte G[0:2] R[3:8] \hideinitializer */ #define CAP_PAR_INDATORD_GBRG (0x2ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: G[0:3] G[4:8], 1byte G[0:4] G[5:8] \hideinitializer */ #define CAP_PAR_INDATORD_GRBG (0x3ul<<CAP_PAR_INDATORD_Pos) /*!< CAP PAR setting for Sensor Input Data Order, 0byte: G[0:3] G[4:8], 1byte G[0:4] G[5:8] \hideinitializer */ #define CAP_PAR_OUTFMT_YUV422 (0x0ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data YUV422 Format Output to System Memory \hideinitializer */ #define CAP_PAR_OUTFMT_ONLY_Y (0x1ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data ONLY_Y Format Output to System Memory \hideinitializer */ #define CAP_PAR_OUTFMT_RGB555 (0x2ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data RGB555 Format Output to System Memory \hideinitializer */ #define CAP_PAR_OUTFMT_RGB565 (0x3ul<<CAP_PAR_OUTFMT_Pos) /*!< CAP PAR setting for Image Data RGB565 Format Output to System Memory \hideinitializer */ #define CAP_PAR_PLNFMT_YUV422 (0x0ul<<CAP_PAR_PLNFMT_Pos) /*!< CAP PAR setting for Planar Output YUV422 Format \hideinitializer */ #define CAP_PAR_PLNFMT_YUV420 (0x1ul<<CAP_PAR_PLNFMT_Pos) /*!< CAP PAR setting for Planar Output YUV420 Format \hideinitializer */ #define CAP_PAR_VSP_LOW (0x0ul<<CAP_PAR_VSP_Pos) /*!< CAP PAR setting for Sensor Vsync Polarity \hideinitializer */ #define CAP_PAR_VSP_HIGH (0x1ul<<CAP_PAR_VSP_Pos) /*!< CAP PAR setting for Sensor Vsync Polarity \hideinitializer */ #define CAP_PAR_HSP_LOW (0x0ul<<CAP_PAR_HSP_Pos) /*!< CAP PAR setting for Sensor Hsync Polarity \hideinitializer */ #define CAP_PAR_HSP_HIGH (0x1ul<<CAP_PAR_HSP_Pos) /*!< CAP PAR setting for Sensor Hsync Polarity \hideinitializer */ #define CAP_PAR_PCLKP_LOW (0x0ul<<CAP_PAR_PCLKP_Pos) /*!< CAP PAR setting for Sensor Pixel Clock Polarity \hideinitializer */ #define CAP_PAR_PCLKP_HIGH (0x1ul<<CAP_PAR_PCLKP_Pos) /*!< CAP PAR setting for Sensor Pixel Clock Polarity \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* VININT constant definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define CAP_INT_VIEN_ENABLE (0x1ul<<CAP_INT_VIEN_Pos) /*!< VININT setting for Frame End Interrupt enable \hideinitializer */ #define CAP_INT_MEIEN_ENABLE (0x1ul<<CAP_INT_MEIEN_Pos) /*!< VININT setting for Bus Master Transfer Error Interrupt enable \hideinitializer */ #define CAP_INT_ADDRMIEN_ENABLE (0x1ul<<CAP_INT_ADDRMIEN_Pos) /*!< VININT setting for Memory Address Match Interrupt enable \hideinitializer */ #define CAP_INT_MDIEN_ENABLE (0x1ul<<CAP_INT_MDIEN_Pos) /*!< VININT setting for Motion Detection Output Finish Interrupt Enable enable \hideinitializer */ static uint32_t u32EscapeFrame = 0; /*---------------------------------------------------------------------------------------------------------*/ /* Define Error Code */ /*---------------------------------------------------------------------------------------------------------*/ #define CAP_INVALID_INT ((int32_t)(0xFFFFFFFF-1)) #define CAP_INVALID_BUF ((int32_t)(0xFFFFFFFF-2)) #define CAP_INVALID_PIPE ((int32_t)(0xFFFFFFFF-3)) /*@}*/ /* end of group NUC472_442_CAP_EXPORTED_CONSTANTS */ /** @addtogroup NUC472_442_CAP_EXPORTED_FUNCTIONS CAP Exported Functions @{ */ /** * @brief Is CAP module Enable * * @return FALSE(Enable) or TRUE(Disable) * * @details Check Image Capture Interface module Enable or Disable * \hideinitializer */ #define CAP_IS_STOPPED() ((ICAP->CTL & CAP_CTL_CAPEN_Msk)?0:1) /** * @brief Clear CAP flag * * @param[in] u32IntMask interrupt flags settings. It could be * - \ref CAP_INT_VINTF_Msk * - \ref CAP_INT_MEINTF_Msk * - \ref CAP_INT_ADDRMINTF_Msk * - \ref CAP_INT_MDINTF_Msk * * @return TRUE(Enable) or FALSE(Disable) * * @details Clear Image Capture Interface interrupt flag * \hideinitializer */ #define CAP_CLR_INT_FLAG(u32IntMask) (CAP->CAPINT |=u32IntMask) /** * @brief Get CAP Interrupt status * * @return TRUE(Enable) or FALSE(Disable) * * @details Get Image Capture Interface interrupt status. * \hideinitializer */ #define CAP_GET_INT_STS() (CAP->CAPINT) void CAP_Open(uint32_t u32InFormat, uint32_t u32OutFormet); void CAP_SetCroppingWindow(uint32_t u32VStart,uint32_t u32HStart, uint32_t u32Height, uint32_t u32Width); void CAP_SetPacketBuf(uint32_t u32Address ); void CAP_SetPlanarBuf(uint32_t u32YAddr, uint32_t u32UAddr, uint32_t u32VAddr); void CAP_Close(void); void CAP_EnableInt(uint32_t u32IntMask); void CAP_DisableInt(uint32_t u32IntMask); void CAP_Start(void); void CAP_Stop(uint32_t u32FrameComplete); void CAP_SetPacketScaling(uint32_t u32VNumerator, uint32_t u32VDenominator, uint32_t u32HNumerator, uint32_t u32HDenominator); void CAP_SetPlanarScaling(uint32_t u32VNumerator, uint32_t u32VDenominator, uint32_t u32HNumerator, uint32_t u32HDenominator); void CAP_SetPacketStride(uint32_t u32Stride ); void CAP_SetPlanarStride(uint32_t u32Stride ); void CAP_EnableMotionDet(uint32_t u32Freq, uint32_t u32BlockSize, uint32_t u32Format, uint32_t u32Threshold, uint32_t u32YDetAddr, uint32_t u32DetAddr); void CAP_DisableMotionDet(void); /*@}*/ /* end of group NUC472_442_CAP_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group NUC472_442_CAP_Driver */ /*@}*/ /* end of group NUC472_442_Device_Driver */ #ifdef __cplusplus } #endif #endif //__CAP_H__ /*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/