Mouse code for the MacroRat
mbed-dev/targets/TARGET_NUVOTON/TARGET_M451/device/StdDriver/m451_usbd.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/****************************************************************************** * @file usbd.h * @brief M451 series USB driver header file * @version 2.0.0 * @date 10, January, 2014 * * @note * Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved. ******************************************************************************/ #ifndef __USBD_H__ #define __USBD_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup Standard_Driver Standard Driver @{ */ /** @addtogroup USBD_Driver USBD Driver @{ */ /** @addtogroup USBD_EXPORTED_STRUCTS USBD Exported Structs @{ */ typedef struct s_usbd_info { const uint8_t *gu8DevDesc; /*!< Pointer for USB Device Descriptor */ const uint8_t *gu8ConfigDesc; /*!< Pointer for USB Configuration Descriptor */ const uint8_t **gu8StringDesc; /*!< Pointer for USB String Descriptor pointers */ const uint8_t **gu8HidReportDesc; /*!< Pointer for USB HID Report Descriptor */ const uint32_t *gu32HidReportSize; /*!< Pointer for HID Report descriptor Size */ const uint32_t *gu32ConfigHidDescIdx; /*!< Pointer for HID Descriptor start index */ } S_USBD_INFO_T; extern const S_USBD_INFO_T gsInfo; /*@}*/ /* end of group USBD_EXPORTED_STRUCTS */ /** @addtogroup USBD_EXPORTED_CONSTANTS USBD Exported Constants @{ */ #define USBD_BUF_BASE (USBD_BASE+0x100) #define USBD_MAX_EP 8 #define EP0 0 /*!< Endpoint 0 */ #define EP1 1 /*!< Endpoint 1 */ #define EP2 2 /*!< Endpoint 2 */ #define EP3 3 /*!< Endpoint 3 */ #define EP4 4 /*!< Endpoint 4 */ #define EP5 5 /*!< Endpoint 5 */ #define EP6 6 /*!< Endpoint 6 */ #define EP7 7 /*!< Endpoint 7 */ /*!<USB Request Type */ #define REQ_STANDARD 0x00 #define REQ_CLASS 0x20 #define REQ_VENDOR 0x40 /*!<USB Standard Request */ #define USBD_GET_STATUS 0x00 #define USBD_CLEAR_FEATURE 0x01 #define USBD_SET_FEATURE 0x03 #define USBD_SET_ADDRESS 0x05 #define USBD_GET_DESCRIPTOR 0x06 #define USBD_SET_DESCRIPTOR 0x07 #define USBD_GET_CONFIGURATION 0x08 #define USBD_SET_CONFIGURATION 0x09 #define USBD_GET_INTERFACE 0x0A #define USBD_SET_INTERFACE 0x0B #define USBD_SYNC_FRAME 0x0C /*!<USB Descriptor Type */ #define DESC_DEVICE 0x01 #define DESC_CONFIG 0x02 #define DESC_STRING 0x03 #define DESC_INTERFACE 0x04 #define DESC_ENDPOINT 0x05 #define DESC_QUALIFIER 0x06 #define DESC_OTHERSPEED 0x07 /*!<USB HID Descriptor Type */ #define DESC_HID 0x21 #define DESC_HID_RPT 0x22 /*!<USB Descriptor Length */ #define LEN_DEVICE 18 #define LEN_CONFIG 9 #define LEN_INTERFACE 9 #define LEN_ENDPOINT 7 #define LEN_HID 9 #define LEN_CCID 0x36 /*!<USB Endpoint Type */ #define EP_ISO 0x01 #define EP_BULK 0x02 #define EP_INT 0x03 #define EP_INPUT 0x80 #define EP_OUTPUT 0x00 /*!<USB Feature Selector */ #define FEATURE_DEVICE_REMOTE_WAKEUP 0x01 #define FEATURE_ENDPOINT_HALT 0x00 /******************************************************************************/ /* USB Specific Macros */ /******************************************************************************/ #define USBD_WAKEUP_EN USBD_INTEN_WKEN_Msk /*!< USB Wake-up Enable */ #define USBD_DRVSE0 USBD_SE0_SE0_Msk /*!< Drive SE0 */ #define USBD_DPPU_EN USBD_ATTR_DPPUEN_Msk /*!< USB D+ Pull-up Enable */ #define USBD_PWRDN USBD_ATTR_PWRDN_Msk /*!< PHY Turn-On */ #define USBD_PHY_EN USBD_ATTR_PHYEN_Msk /*!< PHY Enable */ #define USBD_USB_EN USBD_ATTR_USBEN_Msk /*!< USB Enable */ #define USBD_INT_BUS USBD_INTEN_BUSIEN_Msk /*!< USB Bus Event Interrupt */ #define USBD_INT_USB USBD_INTEN_USBIEN_Msk /*!< USB Event Interrupt */ #define USBD_INT_FLDET USBD_INTEN_VBDETIEN_Msk /*!< USB VBUS Detection Interrupt */ #define USBD_INT_WAKEUP (USBD_INTEN_NEVWKIEN_Msk | USBD_INTEN_WKEN_Msk) /*!< USB No-Event-Wake-Up Interrupt */ #define USBD_INTSTS_WAKEUP USBD_INTSTS_NEVWKIF_Msk /*!< USB No-Event-Wake-Up Interrupt Status */ #define USBD_INTSTS_FLDET USBD_INTSTS_VBDETIF_Msk /*!< USB Float Detect Interrupt Status */ #define USBD_INTSTS_BUS USBD_INTSTS_BUSIF_Msk /*!< USB Bus Event Interrupt Status */ #define USBD_INTSTS_USB USBD_INTSTS_USBIF_Msk /*!< USB Event Interrupt Status */ #define USBD_INTSTS_SETUP USBD_INTSTS_SETUP_Msk /*!< USB Setup Event */ #define USBD_INTSTS_EP0 USBD_INTSTS_EPEVT0_Msk /*!< USB Endpoint 0 Event */ #define USBD_INTSTS_EP1 USBD_INTSTS_EPEVT1_Msk /*!< USB Endpoint 1 Event */ #define USBD_INTSTS_EP2 USBD_INTSTS_EPEVT2_Msk /*!< USB Endpoint 2 Event */ #define USBD_INTSTS_EP3 USBD_INTSTS_EPEVT3_Msk /*!< USB Endpoint 3 Event */ #define USBD_INTSTS_EP4 USBD_INTSTS_EPEVT4_Msk /*!< USB Endpoint 4 Event */ #define USBD_INTSTS_EP5 USBD_INTSTS_EPEVT5_Msk /*!< USB Endpoint 5 Event */ #define USBD_INTSTS_EP6 USBD_INTSTS_EPEVT6_Msk /*!< USB Endpoint 6 Event */ #define USBD_INTSTS_EP7 USBD_INTSTS_EPEVT7_Msk /*!< USB Endpoint 7 Event */ #define USBD_STATE_USBRST USBD_ATTR_USBRST_Msk /*!< USB Bus Reset */ #define USBD_STATE_SUSPEND USBD_ATTR_SUSPEND_Msk /*!< USB Bus Suspend */ #define USBD_STATE_RESUME USBD_ATTR_RESUME_Msk /*!< USB Bus Resume */ #define USBD_STATE_TIMEOUT USBD_ATTR_TOUT_Msk /*!< USB Bus Timeout */ #define USBD_CFGP_SSTALL USBD_CFGP_SSTALL_Msk /*!< Set Stall */ #define USBD_CFG_CSTALL USBD_CFG_CSTALL_Msk /*!< Clear Stall */ #define USBD_CFG_EPMODE_DISABLE (0ul << USBD_CFG_STATE_Pos)/*!< Endpoint Disable */ #define USBD_CFG_EPMODE_OUT (1ul << USBD_CFG_STATE_Pos)/*!< Out Endpoint */ #define USBD_CFG_EPMODE_IN (2ul << USBD_CFG_STATE_Pos)/*!< In Endpoint */ #define USBD_CFG_TYPE_ISO (1ul << USBD_CFG_ISOCH_Pos) /*!< Isochronous */ /*@}*/ /* end of group USBD_EXPORTED_CONSTANTS */ /** @addtogroup USBD_EXPORTED_FUNCTIONS USBD Exported Functions @{ */ /** * @brief Compare two input numbers and return maximum one. * * @param[in] a First number to be compared. * @param[in] b Second number to be compared. * * @return Maximum value between a and b. * * @details If a > b, then return a. Otherwise, return b. */ #define Maximum(a,b) ((a)>(b) ? (a) : (b)) /** * @brief Compare two input numbers and return minimum one * * @param[in] a First number to be compared * @param[in] b Second number to be compared * * @return Minimum value between a and b * * @details If a < b, then return a. Otherwise, return b. */ #define Minimum(a,b) ((a)<(b) ? (a) : (b)) /** * @brief Enable USB * * @param None * * @return None * * @details To set USB ATTR control register to enable USB and PHY. * */ #define USBD_ENABLE_USB() ((uint32_t)(USBD->ATTR |= (USBD_USB_EN|USBD_PHY_EN))) /** * @brief Disable USB * * @param None * * @return None * * @details To set USB ATTR control register to disable USB. * */ #define USBD_DISABLE_USB() ((uint32_t)(USBD->ATTR &= ~USBD_USB_EN)) /** * @brief Enable USB PHY * * @param None * * @return None * * @details To set USB ATTR control register to enable USB PHY. * */ #define USBD_ENABLE_PHY() ((uint32_t)(USBD->ATTR |= USBD_PHY_EN)) /** * @brief Disable USB PHY * * @param None * * @return None * * @details To set USB ATTR control register to disable USB PHY. * */ #define USBD_DISABLE_PHY() ((uint32_t)(USBD->ATTR &= ~USBD_PHY_EN)) /** * @brief Enable SE0. Force USB PHY transceiver to drive SE0. * * @param None * * @return None * * @details Set DRVSE0 bit of USB_DRVSE0 register to enable software-disconnect function. Force USB PHY transceiver to drive SE0 to bus. * */ #define USBD_SET_SE0() ((uint32_t)(USBD->SE0 |= USBD_DRVSE0)) /** * @brief Disable SE0 * * @param None * * @return None * * @details Clear DRVSE0 bit of USB_DRVSE0 register to disable software-disconnect function. * */ #define USBD_CLR_SE0() ((uint32_t)(USBD->SE0 &= ~USBD_DRVSE0)) /** * @brief Set USB device address * * @param[in] addr The USB device address. * * @return None * * @details Write USB device address to USB_FADDR register. * */ #define USBD_SET_ADDR(addr) (USBD->FADDR = (addr)) /** * @brief Get USB device address * * @param None * * @return USB device address * * @details Read USB_FADDR register to get USB device address. * */ #define USBD_GET_ADDR() ((uint32_t)(USBD->FADDR)) /** * @brief Enable USB interrupt function * * @param[in] intr The combination of the specified interrupt enable bits. * Each bit corresponds to a interrupt enable bit. * This parameter decides which interrupts will be enabled. * (USBD_INT_WAKEUP, USBD_INT_FLDET, USBD_INT_USB, USBD_INT_BUS) * * @return None * * @details Enable USB related interrupt functions specified by intr parameter. * */ #define USBD_ENABLE_INT(intr) (USBD->INTEN |= (intr)) /** * @brief Get interrupt status * * @param None * * @return The value of USB_INTSTS register * * @details Return all interrupt flags of USB_INTSTS register. * */ #define USBD_GET_INT_FLAG() ((uint32_t)(USBD->INTSTS)) /** * @brief Clear USB interrupt flag * * @param[in] flag The combination of the specified interrupt flags. * Each bit corresponds to a interrupt source. * This parameter decides which interrupt flags will be cleared. * (USBD_INTSTS_WAKEUP, USBD_INTSTS_FLDET, USBD_INTSTS_BUS, USBD_INTSTS_USB) * * @return None * * @details Clear USB related interrupt flags specified by flag parameter. * */ #define USBD_CLR_INT_FLAG(flag) (USBD->INTSTS = (flag)) /** * @brief Get endpoint status * * @param None * * @return The value of USB_EPSTS register. * * @details Return all endpoint status. * */ #define USBD_GET_EP_FLAG() ((uint32_t)(USBD->EPSTS)) /** * @brief Get USB bus state * * @param None * * @return The value of USB_ATTR[3:0]. * Bit 0 indicates USB bus reset status. * Bit 1 indicates USB bus suspend status. * Bit 2 indicates USB bus resume status. * Bit 3 indicates USB bus time-out status. * * @details Return USB_ATTR[3:0] for USB bus events. * */ #define USBD_GET_BUS_STATE() ((uint32_t)(USBD->ATTR & 0xf)) /** * @brief Check cable connection state * * @param None * * @retval 0 USB cable is not attached. * @retval 1 USB cable is attached. * * @details Check the connection state by FLDET bit of USB_FLDET register. * */ #define USBD_IS_ATTACHED() ((uint32_t)(USBD->VBUSDET & USBD_VBUSDET_VBUSDET_Msk)) /** * @brief Stop USB transaction of the specified endpoint ID * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @return None * * @details Write 1 to CLRRDY bit of USB_CFGPx register to stop USB transaction of the specified endpoint ID. * */ #define USBD_STOP_TRANSACTION(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) |= USBD_CFGP_CLRRDY_Msk) /** * @brief Set USB DATA1 PID for the specified endpoint ID * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @return None * * @details Set DSQ_SYNC bit of USB_CFGx register to specify the DATA1 PID for the following IN token transaction. * Base on this setting, hardware will toggle PID between DATA0 and DATA1 automatically for IN token transactions. * */ #define USBD_SET_DATA1(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFG + (uint32_t)((ep) << 4))) |= USBD_CFG_DSQSYNC_Msk) /** * @brief Set USB DATA0 PID for the specified endpoint ID * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @return None * * @details Clear DSQ_SYNC bit of USB_CFGx register to specify the DATA0 PID for the following IN token transaction. * Base on this setting, hardware will toggle PID between DATA0 and DATA1 automatically for IN token transactions. * */ #define USBD_SET_DATA0(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFG + (uint32_t)((ep) << 4))) &= (~USBD_CFG_DSQSYNC_Msk)) /** * @brief Set USB payload size (IN data) * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @param[in] size The transfer length. * * @return None * * @details This macro will write the transfer length to USB_MXPLDx register for IN data transaction. * */ #define USBD_SET_PAYLOAD_LEN(ep, size) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].MXPLD + (uint32_t)((ep) << 4))) = (size)) /** * @brief Get USB payload size (OUT data) * * @param[in] ep The USB endpoint ID. M451 Series supports 8 endpoint ID. This parameter could be 0 ~ 7. * * @return The value of USB_MXPLDx register. * * @details Get the data length of OUT data transaction by reading USB_MXPLDx register. * */ #define USBD_GET_PAYLOAD_LEN(ep) ((uint32_t)*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].MXPLD + (uint32_t)((ep) << 4)))) /** * @brief Configure endpoint * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @param[in] config The USB configuration. * * @return None * * @details This macro will write config parameter to USB_CFGx register of specified endpoint ID. * */ #define USBD_CONFIG_EP(ep, config) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFG + (uint32_t)((ep) << 4))) = (config)) /** * @brief Set USB endpoint buffer * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @param[in] offset The SRAM offset. * * @return None * * @details This macro will set the SRAM offset for the specified endpoint ID. * */ #define USBD_SET_EP_BUF_ADDR(ep, offset) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].BUFSEG + (uint32_t)((ep) << 4))) = (offset)) /** * @brief Get the offset of the specified USB endpoint buffer * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @return The offset of the specified endpoint buffer. * * @details This macro will return the SRAM offset of the specified endpoint ID. * */ #define USBD_GET_EP_BUF_ADDR(ep) ((uint32_t)*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].BUFSEG + (uint32_t)((ep) << 4)))) /** * @brief Set USB endpoint stall state * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @return None * * @details Set USB endpoint stall state for the specified endpoint ID. Endpoint will respond STALL token automatically. * */ #define USBD_SET_EP_STALL(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) |= USBD_CFGP_SSTALL_Msk) /** * @brief Clear USB endpoint stall state * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @return None * * @details Clear USB endpoint stall state for the specified endpoint ID. Endpoint will respond ACK/NAK token. */ #define USBD_CLR_EP_STALL(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) &= ~USBD_CFGP_SSTALL_Msk) /** * @brief Get USB endpoint stall state * * @param[in] ep The USB endpoint ID. M451 Series supports 8 hardware endpoint ID. This parameter could be 0 ~ 7. * * @retval 0 USB endpoint is not stalled. * @retval Others USB endpoint is stalled. * * @details Get USB endpoint stall state of the specified endpoint ID. * */ #define USBD_GET_EP_STALL(ep) (*((__IO uint32_t *) ((uint32_t)&USBD->EP[0].CFGP + (uint32_t)((ep) << 4))) & USBD_CFGP_SSTALL_Msk) /** * @brief To support byte access between USB SRAM and system SRAM * * @param[in] dest Destination pointer. * * @param[in] src Source pointer. * * @param[in] size Byte count. * * @return None * * @details This function will copy the number of data specified by size and src parameters to the address specified by dest parameter. * */ static __INLINE void USBD_MemCopy(uint8_t *dest, uint8_t *src, int32_t size) { while(size--) *dest++ = *src++; } /** * @brief Set USB endpoint stall state * * @param[in] epnum USB endpoint number * * @return None * * @details Set USB endpoint stall state. Endpoint will respond STALL token automatically. * */ static __INLINE void USBD_SetStall(uint8_t epnum) { uint32_t u32CfgAddr; uint32_t u32Cfg; int i; for(i = 0; i < USBD_MAX_EP; i++) { u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFG; /* USBD_CFG0 */ u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); if((u32Cfg & 0xf) == epnum) { u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFGP; /* USBD_CFGP0 */ u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); *((__IO uint32_t *)(u32CfgAddr)) = (u32Cfg | USBD_CFGP_SSTALL); break; } } } /** * @brief Clear USB endpoint stall state * * @param[in] epnum USB endpoint number * * @return None * * @details Clear USB endpoint stall state. Endpoint will respond ACK/NAK token. */ static __INLINE void USBD_ClearStall(uint8_t epnum) { uint32_t u32CfgAddr; uint32_t u32Cfg; int i; for(i = 0; i < USBD_MAX_EP; i++) { u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFG; /* USBD_CFG0 */ u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); if((u32Cfg & 0xf) == epnum) { u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFGP; /* USBD_CFGP0 */ u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); *((__IO uint32_t *)(u32CfgAddr)) = (u32Cfg & ~USBD_CFGP_SSTALL); break; } } } /** * @brief Get USB endpoint stall state * * @param[in] epnum USB endpoint number * * @retval 0 USB endpoint is not stalled. * @retval Others USB endpoint is stalled. * * @details Get USB endpoint stall state. * */ static __INLINE uint32_t USBD_GetStall(uint8_t epnum) { uint32_t u32CfgAddr; uint32_t u32Cfg; int i; for(i = 0; i < USBD_MAX_EP; i++) { u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFG; /* USBD_CFG0 */ u32Cfg = *((__IO uint32_t *)(u32CfgAddr)); if((u32Cfg & 0xf) == epnum) { u32CfgAddr = (uint32_t)(i << 4) + (uint32_t)&USBD->EP[0].CFGP; /* USBD_CFGP0 */ break; } } return ((*((__IO uint32_t *)(u32CfgAddr))) & USBD_CFGP_SSTALL); } extern volatile uint8_t g_usbd_RemoteWakeupEn; typedef void (*VENDOR_REQ)(void); /*!< Functional pointer type definition for Vendor class */ typedef void (*CLASS_REQ)(void); /*!< Functional pointer type declaration for USB class request callback handler */ typedef void (*SET_INTERFACE_REQ)(void); /*!< Functional pointer type declaration for USB set interface request callback handler */ typedef void (*SET_CONFIG_CB)(void); /*!< Functional pointer type declaration for USB set configuration request callback handler */ /*--------------------------------------------------------------------*/ void USBD_Open(const S_USBD_INFO_T *param, CLASS_REQ pfnClassReq, SET_INTERFACE_REQ pfnSetInterface); void USBD_Start(void); void USBD_GetSetupPacket(uint8_t *buf); void USBD_ProcessSetupPacket(void); void USBD_StandardRequest(void); void USBD_PrepareCtrlIn(uint8_t *pu8Buf, uint32_t u32Size); void USBD_CtrlIn(void); void USBD_PrepareCtrlOut(uint8_t *pu8Buf, uint32_t u32Size); void USBD_CtrlOut(void); void USBD_SwReset(void); void USBD_SetVendorRequest(VENDOR_REQ pfnVendorReq); void USBD_SetConfigCallback(SET_CONFIG_CB pfnSetConfigCallback); void USBD_LockEpStall(uint32_t u32EpBitmap); /*@}*/ /* end of group USBD_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group USBD_Driver */ /*@}*/ /* end of group Standard_Driver */ #ifdef __cplusplus } #endif #endif //__USBD_H__ /*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/