Mouse code for the MacroRat
mbed-dev/targets/TARGET_Atmel/TARGET_SAM_CortexM4/drivers/supc/supc.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/** * \file * * \brief Supply Controller (SUPC) driver for SAM. * * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved. * * \asf_license_start * * \page License * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of Atmel may not be used to endorse or promote products derived * from this software without specific prior written permission. * * 4. This software may only be redistributed and used in connection with an * Atmel microcontroller product. * * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * \asf_license_stop * */ /* * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> */ #ifndef SUPC_H_INCLUDED #define SUPC_H_INCLUDED #include "compiler.h" /// @cond 0 /**INDENT-OFF**/ #ifdef __cplusplus extern "C" { #endif /**INDENT-ON**/ /// @endcond /** Key used to write SUPC registers */ #ifndef SUPC_CR_KEY_PASSWD #define SUPC_CR_KEY_PASSWD SUPC_CR_KEY(0xA5U) #endif #ifndef SUPC_MR_KEY_PASSWD #define SUPC_MR_KEY_PASSWD SUPC_MR_KEY(0xA5U) #endif #if (SAM4C || SAM4CP || SAM4CM) /** Power Mode */ enum slcdc_power_mode { /** The internal supply source and the external supply source are both deselected. */ SLCDC_POWER_MODE_LCDOFF = SUPC_MR_LCDMODE_LCDOFF, /** The external supply source for LCD is selected */ SLCDC_POWER_MODE_LCDON_EXTVR = SUPC_MR_LCDMODE_LCDON_EXTVR, /** The internal supply source for LCD is selected */ SLCDC_POWER_MODE_LCDON_INVR = SUPC_MR_LCDMODE_LCDON_INVR, }; #endif #if (!SAMG) void supc_enable_backup_mode(Supc *p_supc); void supc_enable_voltage_regulator(Supc *p_supc); void supc_disable_voltage_regulator(Supc *p_supc); #endif void supc_switch_sclk_to_32kxtal(Supc *p_supc, uint32_t ul_bypass); void supc_enable_brownout_detector(Supc *p_supc); void supc_disable_brownout_detector(Supc *p_supc); void supc_enable_brownout_reset(Supc *p_supc); void supc_disable_brownout_reset(Supc *p_supc); void supc_set_monitor_threshold(Supc *p_supc, uint32_t ul_threshold); void supc_set_monitor_sampling_period(Supc *p_supc, uint32_t ul_period); void supc_enable_monitor_reset(Supc *p_supc); void supc_disable_monitor_reset(Supc *p_supc); void supc_enable_monitor_interrupt(Supc *p_supc); void supc_disable_monitor_interrupt(Supc *p_supc); #if (!(SAMG51 || SAMG53 || SAMG54)) void supc_set_wakeup_mode(Supc *p_supc, uint32_t ul_mode); void supc_set_wakeup_inputs(Supc *p_supc, uint32_t ul_inputs, uint32_t ul_transition); #endif uint32_t supc_get_status(Supc *p_supc); #if (SAM4C || SAM4CP || SAM4CM) void supc_enable_backup_power_on_reset(Supc *p_supc); void supc_disable_backup_power_on_reset(Supc *p_supc); enum slcdc_power_mode supc_get_slcd_power_mode(Supc *p_supc); void supc_set_slcd_power_mode(Supc *p_supc, enum slcdc_power_mode mode); void supc_set_slcd_vol(Supc *p_supc, uint32_t vol); #endif #if SAMG54 void supc_set_regulator_trim_factory(Supc *p_supc); void supc_set_regulator_trim_user(Supc *p_supc, uint32_t value); #endif #if (SAMV70 || SAMV71 || SAME70 || SAMS70) void supc_backup_sram_on(Supc *p_supc); void supc_backup_sram_off(Supc *p_supc); #endif /// @cond 0 /**INDENT-OFF**/ #ifdef __cplusplus } #endif /**INDENT-ON**/ /// @endcond #endif /* SUPC_H_INCLUDED */