Mouse code for the MacroRat
mbed-dev/targets/TARGET_ARM_SSG/TARGET_IOTSS/PinNames.h
- Committer:
- sahilmgandhi
- Date:
- 2017-05-14
- Revision:
- 18:6a4db94011d3
File content as of revision 18:6a4db94011d3:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 typedef enum { // MPS2 EXP Pin Names EXP0 = 0 , EXP1 = 4 , EXP2 = 2 , EXP3 = 3 , EXP4 = 1 , EXP5 = 15, EXP6 = 5 , EXP7 = 6 , EXP8 = 7 , EXP9 = 8 , EXP10 =9 , EXP11 =13, EXP12 =10, EXP13 =11, EXP14 =12, EXP15 =14, EXP16 =18, EXP17 =19, EXP18 =20, EXP19 =21, EXP20 =52, EXP21 =53, EXP22 =54, EXP23 =55, EXP24 =56, EXP25 =57, EXP26 =16, EXP27 =25, EXP28 =24, EXP29 =31, EXP30 =17, EXP31 =23, EXP32 =27, EXP33 =30, EXP34 =26, EXP35 =28, EXP36 =29, EXP37 =58, EXP38 =48, EXP39 =49, EXP40 =50, EXP41 =22, EXP42 =59, EXP43 =60, EXP44 =51, EXP45 =61, EXP46 =62, EXP47 =63, EXP48 =64, EXP49 =65, EXP50 =66, EXP51 =67, // Other mbed Pin Names //LEDs on mps2 //user leds USERLED1 = 100, USERLED2 = 101, //user switches USERSW1 = 110, USERSW2 = 111, //mcc leds LED1 = 200, LED2 = 201, LED3 = 202, LED4 = 203, LED5 = 204, LED6 = 205, LED7 = 206, LED8 = 207, //MCC Switches SW1 = 210, SW2 = 211, SW3 = 212, SW4 = 213, SW5 = 214, SW6 = 215, SW7 = 216, SW8 = 217, //MPS2 SPI header pins j21 MOSI_SPI = 300, MISO_SPI = 301, SCLK_SPI = 302, SSEL_SPI = 303, //MPS2 CLCD SPI CLCD_MOSI = 304, CLCD_MISO = 305, CLCD_SCLK = 306, CLCD_SSEL = 307, CLCD_RESET = 308, CLCD_RS = 309, CLCD_RD = 310, CLCD_BL_CTRL = 311, //MPS2 shield 0 SPI SHIELD_0_SPI_SCK = 320, SHIELD_0_SPI_MOSI = 321, SHIELD_0_SPI_MISO = 322, SHIELD_0_SPI_nCS = 323, //MPS2 shield 1 SPI SHIELD_1_SPI_SCK = 331, SHIELD_1_SPI_MOSI = 332, SHIELD_1_SPI_MISO = 333, SHIELD_1_SPI_nCS = 334, //MPS2 shield ADC SPI ADC_MOSI = 650, ADC_MISO = 651, ADC_SCLK = 652, ADC_SSEL = 653, //MPS2 Uart USBTX = 400, USBRX = 401, XB_TX = 402, XB_RX = 403, SH0_TX = 404, SH0_RX = 405, SH1_TX = 406, SH1_RX = 407, //MPS2 I2C touchscreen and audio TSC_SDA = 500, TSC_SCL = 501, AUD_SDA = 502, AUD_SCL = 503, //MPS2 I2C for shield SHIELD_0_SDA = 504, SHIELD_0_SCL = 505, SHIELD_1_SDA = 506, SHIELD_1_SCL = 507, //MPS2 shield Analog pins A0_0 = 600, A0_1 = 601, A0_2 = 602, A0_3 = 603, A0_4 = 604, A0_5 = 605, A1_0 = 606, A1_1 = 607, A1_2 = 608, A1_3 = 609, A1_4 = 610, A1_5 = 611, //MPS2 Shield Digital pins D0_0 = EXP0, D0_1 = EXP4, D0_2 = EXP2, D0_3 = EXP3, D0_4 = EXP1, D0_5 = EXP6, D0_6 = EXP7, D0_7 = EXP8, D0_8 = EXP9, D0_9 = EXP10, D0_10 = EXP12, D0_11 = EXP13, D0_12 = EXP14, D0_13 = EXP11, D0_14 = EXP15, D0_15 = EXP5, D1_0 = EXP26, D1_1 = EXP30, D1_2 = EXP28, D1_3 = EXP29, D1_4 = EXP27, D1_5 = EXP32, D1_6 = EXP33, D1_7 = EXP34, D1_8 = EXP35, D1_9 = EXP36, D1_10 = EXP38, D1_11 = EXP39, D1_12 = EXP40, D1_13 = EXP44, D1_14 = EXP41, D1_15 = EXP31, // Not connected NC = (int)0xFFFFFFFF, } PinName; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif