Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/PinNames.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_STM/TARGET_STM32L0/TARGET_NUCLEO_L031K6/PinNames.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,123 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" +#include "PinNamesTypes.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PA_0 = 0x00, + PA_1 = 0x01, + PA_2 = 0x02, + PA_3 = 0x03, + PA_4 = 0x04, + PA_5 = 0x05, + PA_6 = 0x06, + PA_7 = 0x07, + PA_8 = 0x08, + PA_9 = 0x09, + PA_10 = 0x0A, + PA_11 = 0x0B, + PA_12 = 0x0C, + PA_13 = 0x0D, + PA_14 = 0x0E, + PA_15 = 0x0F, + + PB_0 = 0x10, + PB_1 = 0x11, + PB_2 = 0x12, + PB_3 = 0x13, + PB_4 = 0x14, + PB_5 = 0x15, + PB_6 = 0x16, + PB_7 = 0x17, + + PC_14 = 0x2E, + PC_15 = 0x2F, + + // ADC internal channels + ADC_TEMP = 0xF0, + ADC_VREF = 0xF1, + + // Arduino connector namings + A0 = PA_0, + A1 = PA_1, + A2 = PA_3, + A3 = PA_4, + A4 = PA_5, + A5 = PA_6, + A6 = PA_7, + A7 = PA_2, + D0 = PA_10, + D1 = PA_9, + D2 = PA_12, + D3 = PB_0, + D4 = PB_7, + D5 = PB_6, + D6 = PB_1, + D7 = PC_14, + D8 = PC_15, + D9 = PA_8, + D10 = PA_11, + D11 = PB_5, + D12 = PB_4, + D13 = PB_3, + + // Generic signals namings + LED1 = PB_3, + LED2 = PB_3, + LED3 = PB_3, + LED4 = PB_3, + SERIAL_TX = PA_2, + SERIAL_RX = PA_15, + USBTX = PA_2, + USBRX = PA_15, + I2C_SCL = PB_6, + I2C_SDA = PB_7, + SPI_MOSI = PB_5, + SPI_MISO = PB_4, + SPI_SCK = PB_3, + SPI_CS = PA_11, + PWM_OUT = PB_0, + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +#ifdef __cplusplus +} +#endif + +#endif