Diff: mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/i2c_ipc7208_map.h

Revision:

18:6a4db94011d3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/i2c_ipc7208_map.h	Sun May 14 23:18:57 2017 +0000
@@ -0,0 +1,87 @@
+/**
+ ******************************************************************************
+ * @file i2c_ipc7208_map.h
+ * @brief I2C IPC 7208 HW register map
+ * @internal
+ * @author ON Semiconductor
+ * $Rev: 3324 $
+ * $Date: 2015-03-27 17:00:28 +0530 (Fri, 27 Mar 2015) $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup i2c_ipc7208
+ *
+ * @details
+ * <p>
+ * I2C IPC 7208 HW register map description
+ * </p>
+ *
+ * <h1> Reference document(s) </h1>
+ * <p>
+ * <a href="../pdf/IPC7208_I2C_APB_DS_v1P3.pdf" target="_blank">
+ * IPC7208 APB I2C Master Design Specification v1.3 </a>
+ * </p>
+ */
+
+#if defined ( __CC_ARM   )
+#pragma anon_unions
+#endif
+
+#ifndef I2C_IPC7208_MAP_H_
+#define I2C_IPC7208_MAP_H_
+
+#include "architecture.h"
+
+/** I2C HW Structure Overlay */
+typedef struct {
+    union {
+        struct {
+            __IO uint32_t CMD_FIFO_EMPTY :1; /**< 1 = Command FIFO is empty , 0 = Command FIFO is empty */
+            __IO uint32_t RD_FIFO_NOT_EMPTY :1; /**< 0 = Read data is not ready , 1 = Read data is ready  */
+            __IO uint32_t I2C_BUS_ERR :1; /**< 0 = No buss error occurred , 1 = buss error */
+            __IO uint32_t RD_FIFO_UFL :1; /**< 0 = Read data FIFO is not underflowed , 1 = Read data FIFO is underflowed */
+            __IO uint32_t CMD_FIFO_OFL :1;/**< 0 = Command FIFO is not overflowed 1 = Command FIFO is overflowed */
+            __IO uint32_t CMD_FIFO_FULL :1; /**< 0 = Command FIFO not full , 1 = Command FIFO full */
+            __IO uint32_t PAD :2; /**< Reserved . Always reads back 0. */
+        } BITS;
+        __IO uint32_t WORD;
+    } STATUS;
+    __IO uint32_t RD_FIFO_REG;/**< Data from the I2C Slave to be read by the processor. */
+    __IO uint32_t CMD_REG; /**< I2C Command Programming interface */
+    union {
+        struct {
+            __IO uint32_t CMD_FIFO_INT :1; /**< Command FIFO empty interrupt : 0 = disable , 1 = enable */
+            __IO uint32_t RD_FIFO_INT :1;  /**< Read Data FIFO Not Empty Interrupt :  0 = disable , 1 = enable */
+            __IO uint32_t I2C_ERR_INT :1;  /**< I2C Error Interrupt : 0 = disable , 1 = enable */
+            //    __IO uint32_t PAD :4;    /**< Reserved. Writes have no effect; Read as 0x00. */
+        } BITS;
+        __IO uint32_t WORD;
+    } IER;
+    union {
+        struct {
+            __IO uint32_t CD_VAL :5; /**< I2C APB Clock Divider Value (low 5 bits). */
+            __IO uint32_t I2C_APB_CD_EN :1; /**< 0 = I2C clock divider disable 1 = I2C clock divider enable */
+            __IO uint32_t I2C_CLK_SRC :1; /**< I2C clock source : 0 =  external clock , 1 = APB clock */
+            __IO uint32_t I2C_MODULE_EN :1; /**< 0 = I2C disable , 1 = I2C enable */
+        } BITS;
+        __IO uint32_t WORD;
+    } CR;
+    __IO uint32_t PRE_SCALE_REG; /* I2C APB Clock Divider Value (upper 8 bits). */
+} I2cIpc7208Reg_t, *I2cIpc7208Reg_pt;
+
+#endif /* I2C_IPC7208_MAP_H_ */