Diff: mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/dma_map.h

Revision:

18:6a4db94011d3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-dev/targets/TARGET_ONSEMI/TARGET_NCS36510/dma_map.h	Sun May 14 23:18:57 2017 +0000
@@ -0,0 +1,94 @@
+/**
+******************************************************************************
+* @file dma_map.h
+* @brief DMA hw module register map
+* @internal
+* @author ON Semiconductor
+* $Rev: 3415 $
+* $Date: 2015-06-05 13:29:52 +0530 (Fri, 05 Jun 2015) $
+******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+*
+* THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+* ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+* INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+* @endinternal
+*
+* @ingroup dma
+*
+* @details
+*/
+
+#ifndef DMA_MAP_H_
+#define DMA_MAP_H_
+
+/*************************************************************************************************
+*                                                                                                *
+*  Header files                                                                                  *
+*                                                                                                *
+*************************************************************************************************/
+
+#include "architecture.h"
+
+/**************************************************************************************************
+*                                                                                                 *
+*  Type definitions                                                                               *
+*                                                                                                 *
+**************************************************************************************************/
+
+/** DMA control HW registers structure overlay */
+typedef struct {
+    union {
+        struct {
+            __IO uint32_t ENABLE:1;        /**< DMA enable:  1 to enable; 0 to disable */
+            __IO uint32_t MODE    :2;      /**< DMA mode: 00 – Memory to memory; 01 – Memory to peripheral; 10 – Peripheral to memory; 11 – Peripheral to peripheral */
+        } BITS;
+        __IO uint32_t WORD;
+    } CONTROL;                           /**< Control register */
+    __IO uint32_t SOURCE;                /**< Address of source, read to get the number of bytes written */
+    __IO uint32_t DESTINATION;           /**< Address of destination, read to get the number of bytes written  */
+    __IO uint32_t SIZE;                  /**< Lenght of the entire transfer */
+    union {
+        struct {
+            __I uint32_t COMPLETED:1;            /**< Done: 0 – Not complete, 1 – Complete */
+            __I uint32_t SOURCE_ERROR:1;         /**< Source Error: 0 – No Error, 1 – Error */
+            __I uint32_t DESTINATION_ERROR:1;    /**< Destination Error: 0 – No Error, 1 – Source Error */
+        } BITS;
+        __I uint32_t WORD;
+    } STATUS;                                    /**< Status register */
+    union {
+        struct {
+            __IO uint32_t COMPLETED:1;            /**< A write of ‘1’ enables the interrupt generated by a DMA transfer complete */
+            __IO uint32_t SOURCE_ERROR:1;         /**< A write of ‘1’ enables the interrupt generated by an error on the source side of the DMA transfer */
+            __IO uint32_t DESTINATION_ERROR:1;    /**< A write of ‘1’ enables the interrupt generated by an error on the destination side of the DMA transfer */
+        } BITS;
+        __IO uint32_t WORD;
+    } INT_ENABLE;                                /**< Interrupt enable */
+    union {
+        struct {
+            __IO uint32_t COMPLETED:1;            /**< A write clears the interrupt generated by a DMA transfer complete */
+            __IO uint32_t SOURCE_ERROR:1;         /**< A write clears the interrupt generated by an error on the source side of the DMA transfer */
+            __IO uint32_t DESTINATION_ERROR:1;    /**< A write clears the interrupt generated by an error on the destination side of the DMA transfer */
+        } BITS;
+        __IO uint32_t WORD;
+    } INT_CLEAR;                                /**< Interrupt clear */
+    union {
+        struct {
+            __I uint32_t COMPLETED:1;            /**< Transfer complete interrupt */
+            __I uint32_t SOURCE_ERROR:1;         /**< Source error interrupt */
+            __I uint32_t DESTINATION_ERROR:1;    /**< Destination error interrupt */
+        } BITS;
+        __I uint32_t WORD;
+    } INT_STATUS;                                /**< Interrupt status */
+} DmaReg_t, *DmaReg_pt;
+#endif /* DMA_MAP_H_ */