Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NXP/TARGET_LPC82X/TARGET_SSCI824/PinNames.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NXP/TARGET_LPC82X/TARGET_SSCI824/PinNames.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,135 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PIN_SHIFT 8 + +typedef enum { +// LPC824 Pin Names (PIN[11:8] + IOCON offset[7:0]) + + P0_0 = ( 0 << PIN_SHIFT) | 0x44, + P0_1 = ( 1 << PIN_SHIFT) | 0x2C, + P0_2 = ( 2 << PIN_SHIFT) | 0x18, + P0_3 = ( 3 << PIN_SHIFT) | 0x14, + P0_4 = ( 4 << PIN_SHIFT) | 0x10, + P0_5 = ( 5 << PIN_SHIFT) | 0x0C, + P0_6 = ( 6 << PIN_SHIFT) | 0x40, + P0_7 = ( 7 << PIN_SHIFT) | 0x3C, + P0_8 = ( 8 << PIN_SHIFT) | 0x38, + P0_9 = ( 9 << PIN_SHIFT) | 0x34, + P0_10 = (10 << PIN_SHIFT) | 0x20, + P0_11 = (11 << PIN_SHIFT) | 0x1C, + P0_12 = (12 << PIN_SHIFT) | 0x08, + P0_13 = (13 << PIN_SHIFT) | 0x04, + P0_14 = (14 << PIN_SHIFT) | 0x48, + P0_15 = (15 << PIN_SHIFT) | 0x28, + P0_16 = (16 << PIN_SHIFT) | 0x24, + P0_17 = (17 << PIN_SHIFT) | 0x00, + P0_18 = (18 << PIN_SHIFT) | 0x78, + P0_19 = (19 << PIN_SHIFT) | 0x74, + P0_20 = (20 << PIN_SHIFT) | 0x70, + P0_21 = (21 << PIN_SHIFT) | 0x6C, + P0_22 = (22 << PIN_SHIFT) | 0x68, + P0_23 = (23 << PIN_SHIFT) | 0x64, + P0_24 = (24 << PIN_SHIFT) | 0x60, + P0_25 = (25 << PIN_SHIFT) | 0x5C, + P0_26 = (26 << PIN_SHIFT) | 0x58, + P0_27 = (27 << PIN_SHIFT) | 0x54, + P0_28 = (28 << PIN_SHIFT) | 0x50, + + dp2 = P0_4, + dp3 = P0_28, + dp4 = P0_11, + dp5 = P0_10, + dp6 = P0_16, + dp7 = P0_27, + dp8 = P0_26, + dp9 = P0_25, + dp10 = P0_24, + dp11 = P0_15, + dp12 = P0_1, + + dp15 = P0_6, + dp16 = P0_0, + dp17 = P0_14, + dp18 = P0_23, + dp19 = P0_22, + dp20 = P0_21, + dp21 = P0_20, + dp22 = P0_19, + dp23 = P0_17, + dp24 = P0_13, + dp25 = P0_12, + dp26 = P0_5, + + LED_RED = P0_20, + LED_GREEN = P0_21, + LED_BLUE = P0_22, + + // mbed original LED naming + LED1 = LED_RED, + LED2 = LED_GREEN, + LED3 = LED_BLUE, + LED4 = LED_BLUE, + + // Serial to USB pins + USBTX = P0_7, + USBRX = P0_18, + + // I2C pins + SCL = P0_10, + SDA = P0_11, + I2C_SCL = P0_10, + I2C_SDA = P0_11, + + // Not connected + NC = (int)0xFFFFFFFF, +} PinName; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX + +typedef struct { + unsigned char n; + unsigned char offset; +} SWM_Map; + +#ifdef __cplusplus +} +#endif + +#endif