Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NXP/TARGET_LPC2460/gpio_irq_api.c
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NXP/TARGET_LPC2460/gpio_irq_api.c Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,154 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "gpio_irq_api.h" +#include "mbed_error.h" +#include <stddef.h> +#include "cmsis.h" + +#define CHANNEL_NUM 48 + +static uint32_t channel_ids[CHANNEL_NUM] = {0}; +static gpio_irq_handler irq_handler; + +static void handle_interrupt_in(void) { + // Read in all current interrupt registers. We do this once as the + // GPIO interrupt registers are on the APB bus, and this is slow. + uint32_t rise0 = LPC_GPIOINT->IO0IntStatR; + uint32_t fall0 = LPC_GPIOINT->IO0IntStatF; + uint32_t rise2 = LPC_GPIOINT->IO2IntStatR; + uint32_t fall2 = LPC_GPIOINT->IO2IntStatF; + uint32_t mask0 = 0; + uint32_t mask2 = 0; + int i; + + // P0.0-0.31 + for (i = 0; i < 32; i++) { + uint32_t pmask = (1 << i); + if (rise0 & pmask) { + mask0 |= pmask; + if (channel_ids[i] != 0) + irq_handler(channel_ids[i], IRQ_RISE); + } + if (fall0 & pmask) { + mask0 |= pmask; + if (channel_ids[i] != 0) + irq_handler(channel_ids[i], IRQ_FALL); + } + } + + // P2.0-2.15 + for (i = 0; i < 16; i++) { + uint32_t pmask = (1 << i); + int channel_index = i + 32; + if (rise2 & pmask) { + mask2 |= pmask; + if (channel_ids[channel_index] != 0) + irq_handler(channel_ids[channel_index], IRQ_RISE); + } + if (fall2 & pmask) { + mask2 |= pmask; + if (channel_ids[channel_index] != 0) + irq_handler(channel_ids[channel_index], IRQ_FALL); + } + } + + // Clear the interrupts we just handled + LPC_GPIOINT->IO0IntClr = mask0; + LPC_GPIOINT->IO2IntClr = mask2; +} + +int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { + if (pin == NC) return -1; + + irq_handler = handler; + + obj->port = (int)pin & ~0x1F; + obj->pin = (int)pin & 0x1F; + + // Interrupts available only on GPIO0 and GPIO2 + if (obj->port != LPC_GPIO0_BASE && obj->port != LPC_GPIO2_BASE) { + error("pins on this port cannot generate interrupts"); + } + + // put us in the interrupt table + int index = (obj->port == LPC_GPIO0_BASE) ? obj->pin : obj->pin + 32; + channel_ids[index] = id; + obj->ch = index; + + NVIC_SetVector(EINT3_IRQn, (uint32_t)handle_interrupt_in); + NVIC_EnableIRQ(EINT3_IRQn); + + return 0; +} + +void gpio_irq_free(gpio_irq_t *obj) { + channel_ids[obj->ch] = 0; +} + +void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { + // ensure nothing is pending + switch (obj->port) { + case LPC_GPIO0_BASE: LPC_GPIOINT->IO0IntClr = 1 << obj->pin; break; + case LPC_GPIO2_BASE: LPC_GPIOINT->IO2IntClr = 1 << obj->pin; break; + } + + // enable the pin interrupt + if (event == IRQ_RISE) { + switch (obj->port) { + case LPC_GPIO0_BASE: + if (enable) { + LPC_GPIOINT->IO0IntEnR |= 1 << obj->pin; + } else { + LPC_GPIOINT->IO0IntEnR &= ~(1 << obj->pin); + } + break; + case LPC_GPIO2_BASE: + if (enable) { + LPC_GPIOINT->IO2IntEnR |= 1 << obj->pin; + } else { + LPC_GPIOINT->IO2IntEnR &= ~(1 << obj->pin); + } + break; + } + } else { + switch (obj->port) { + case LPC_GPIO0_BASE: + if (enable) { + LPC_GPIOINT->IO0IntEnF |= 1 << obj->pin; + } else { + LPC_GPIOINT->IO0IntEnF &= ~(1 << obj->pin); + } + break; + + case LPC_GPIO2_BASE: + if (enable) { + LPC_GPIOINT->IO2IntEnF |= 1 << obj->pin; + } else { + LPC_GPIOINT->IO2IntEnF &= ~(1 << obj->pin); + } + break; + } + } +} + +void gpio_irq_enable(gpio_irq_t *obj) { + NVIC_EnableIRQ(EINT3_IRQn); +} + +void gpio_irq_disable(gpio_irq_t *obj) { + NVIC_DisableIRQ(EINT3_IRQn); +} +