Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NUVOTON/TARGET_M451/device/StdDriver/m451_tk.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NUVOTON/TARGET_M451/device/StdDriver/m451_tk.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,302 @@ +/**************************************************************************//** + * @file tk.h + * @version V1.00 + * $Revision: 6 $ + * $Date: 15/08/24 4:52p $ + * @brief M451 Series TK Driver Header File + * + * @note + * Copyright (C) 2014~2015 Nuvoton Technology Corp. All rights reserved. + * + ******************************************************************************/ +#ifndef __TK_H__ +#define __TK_H__ + +#include "M451Series.h" + +#ifdef __cplusplus +extern "C" +{ +#endif + + +/** @addtogroup Standard_Driver Standard Driver + @{ +*/ + +/** @addtogroup TK_Driver TK Driver + @{ +*/ + +/** @addtogroup TK_EXPORTED_CONSTANTS TK Exported Constants + @{ +*/ + +#define TK_SCAN_MODE_SINGLE (0UL) /*!< Touch key single scan mode */ +#define TK_SCAN_MODE_PERIODIC (TK_CTL_TMRTRGEN_Msk) /*!< Touch key periodic scan mode */ +#define TK_SCAN_MODE_ALL_KEY (TK_REFCTL_SCANALL_Msk) /*!< Touch key all keys scan mode */ +#define TK_SCAN_MODE_PERIODIC_ALL_KEY (TK_CTL_TMRTRGEN_Msk | TK_REFCTL_SCANALL_Msk) /*!< Touch key periodic with all keys scan mode */ + +#define TK_SENSE_PULSE_1 (0UL << TK_REFCTL_SENPTCTL_Pos) /*!< Touch key sensing pulse width is 1us */ +#define TK_SENSE_PULSE_2 (1UL << TK_REFCTL_SENPTCTL_Pos) /*!< Touch key sensing pulse width is 2us */ +#define TK_SENSE_PULSE_4 (2UL << TK_REFCTL_SENPTCTL_Pos) /*!< Touch key sensing pulse width is 4us */ +#define TK_SENSE_PULSE_8 (3UL << TK_REFCTL_SENPTCTL_Pos) /*!< Touch key sensing pulse width is 8us */ + +#define TK_SENSE_CNT_128 (0UL << TK_REFCTL_SENTCTL_Pos) /*!< Touch key sensing count is 128 */ +#define TK_SENSE_CNT_255 (1UL << TK_REFCTL_SENTCTL_Pos) /*!< Touch key sensing count is 255 */ +#define TK_SENSE_CNT_511 (2UL << TK_REFCTL_SENTCTL_Pos) /*!< Touch key sensing count is 511 */ +#define TK_SENSE_CNT_1023 (3UL << TK_REFCTL_SENTCTL_Pos) /*!< Touch key sensing count is 1023 */ + +#define TK_AVCCH_1_DIV_16 (0UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 1/16 VDD */ +#define TK_AVCCH_1_DIV_8 (1UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 1/8 VDD */ +#define TK_AVCCH_3_DIV_16 (2UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 3/16 VDD */ +#define TK_AVCCH_1_DIV_4 (3UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 1/4 VDD */ +#define TK_AVCCH_5_DIV_16 (4UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 5/16 VDD */ +#define TK_AVCCH_3_DIV_8 (5UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 3/8 VDD */ +#define TK_AVCCH_7_DIV_16 (6UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 7/16 VDD */ +#define TK_AVCCH_1_DIV_2 (7UL << TK_CTL_AVCCHSEL_Pos) /*!< Touch key AVCCH voltage is 1/2 VDD */ + +#define TK_CAP_BANK_POL_SEL_GND (0UL << TK_POLCTL_CBPOLSEL_Pos) /*!< Touch key capacitor bank polarity is GND */ +#define TK_CAP_BANK_POL_SEL_AVCCH (1UL << TK_POLCTL_CBPOLSEL_Pos) /*!< Touch key capacitor bank polarity is AVCCH */ +#define TK_CAP_BANK_POL_SEL_VDD (2UL << TK_POLCTL_CBPOLSEL_Pos) /*!< Touch key capacitor bank polarity is VDD */ + +#define TK_TKn_POL_SEL_GND (0UL) /*!< Touch key polarity is GND */ +#define TK_TKn_POL_SEL_AVCCH (1UL) /*!< Touch key polarity is AVCCH */ +#define TK_TKn_POL_SEL_VDD (2UL) /*!< Touch key polarity is VDD */ + +#define TK_INT_EN_SCAN_COMPLETE (TK_INTEN_SCINTEN_Msk) /*!< Touch key enable scan complete interrupt */ +#define TK_INT_EN_SCAN_COMPLETE_EDGE_TH (TK_INTEN_SCTHIEN_Msk) /*!< Touch key enable scan complete with threshold interrupt of edge trigger mode */ +#define TK_INT_EN_SCAN_COMPLETE_LEVEL_TH (TK_INTEN_THIMOD_Msk | TK_INTEN_SCTHIEN_Msk) /*!< Touch key enable scan complete with threshold interrupt of level trigger mode */ + +#define TK_INT_SCAN_COMPLETE (TK_STATUS_SCIF_Msk) /*!< Touch key scan complete interrupt */ +#define TK_INT_SCAN_COMPLETE_TH_ALL (0x1FFFF02UL) /*!< Touch key scan complete or all touch keys threshold control interrupt */ +#define TK_INT_SCAN_TH_ALL (0x1FFFF00UL) /*!< ALL Touch key threshold control interrupt */ +#define TK_INT_SCAN_TH_TK0 (TK_STATUS_TKIF0_Msk) /*!< Touch key 0 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK1 (TK_STATUS_TKIF1_Msk) /*!< Touch key 1 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK2 (TK_STATUS_TKIF2_Msk) /*!< Touch key 2 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK3 (TK_STATUS_TKIF3_Msk) /*!< Touch key 3 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK4 (TK_STATUS_TKIF4_Msk) /*!< Touch key 4 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK5 (TK_STATUS_TKIF5_Msk) /*!< Touch key 5 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK6 (TK_STATUS_TKIF6_Msk) /*!< Touch key 6 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK7 (TK_STATUS_TKIF7_Msk) /*!< Touch key 7 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK8 (TK_STATUS_TKIF8_Msk) /*!< Touch key 8 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK9 (TK_STATUS_TKIF9_Msk) /*!< Touch key 9 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK10 (TK_STATUS_TKIF10_Msk) /*!< Touch key 10 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK11 (TK_STATUS_TKIF11_Msk) /*!< Touch key 11 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK12 (TK_STATUS_TKIF12_Msk) /*!< Touch key 12 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK13 (TK_STATUS_TKIF13_Msk) /*!< Touch key 13 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK14 (TK_STATUS_TKIF14_Msk) /*!< Touch key 14 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK15 (TK_STATUS_TKIF15_Msk) /*!< Touch key 15 threshold control interrupt */ +#define TK_INT_SCAN_TH_TK16 (TK_STATUS_TKIF16_Msk) /*!< Touch key 16 threshold control interrupt */ + + +/*@}*/ /* end of group TK_EXPORTED_CONSTANTS */ + + +/** @addtogroup TK_EXPORTED_FUNCTIONS TK Exported Functions + @{ +*/ + +/** + * @brief Enable scan key(s) + * @param[in] u32Mask Combination of enabled scan keys. Each bit corresponds to a touch key. + * Bit 0 represents touch key 0, bit 1 represents touch key 1... + * @return None + * @note Touch key 16 is the default reference key, so touch key 16 is enabled. + * \hideinitializer + */ +#define TK_ENABLE_SCAN_KEY(u32Mask) (TK->CTL |= (u32Mask)) + +/** + * @brief Disable scan key(s) + * @param[in] u32Mask Combination of disabled scan keys. Each bit corresponds to a touch key. + * Bit 0 represents touch key 0, bit 1 represents touch key 1... + * @return None + * \hideinitializer + */ +#define TK_DISABLE_SCAN_KEY(u32Mask) (TK->CTL &= ~(u32Mask)) + +/** + * @brief Enable reference key(s) + * @param[in] u32Mask Combination of enabled reference keys. Each bit corresponds to a touch key. + * Bit 0 represents touch key 0, bit 1 represents touch key 1... + * @return None + * @note Touch key 16 is the default reference key, so touch key 16 is enabled. + * \hideinitializer + */ +#define TK_ENABLE_REF_KEY(u32Mask) (TK->REFCTL |= (u32Mask)) + +/** + * @brief Disable reference key(s) + * @param[in] u32Mask Combination of disabled reference keys. Each bit corresponds to a touch key. + * Bit 0 represents touch key 0, bit 1 represents touch key 1... + * @return None + * @note It must enable a reference key and touch key 16 is the default reference key. + * If no any one touch key as reference key except touch key 16, then reference Touch key 16 can't be disable. + * \hideinitializer + */ +#define TK_DISABLE_REF_KEY(u32Mask) (TK->REFCTL &= ~(u32Mask)) + +/** + * @brief Initiate enabled key(s) scan immediately. + * @param None + * @return None + * \hideinitializer + */ +#define TK_START_SCAN() (TK->CTL |= TK_CTL_SCAN_Msk) + +/** + * @brief Set touch key Sensing pulse width. + * @param[in] u32PulseWidth Sensing pulse width. + * - \ref TK_SENSE_PULSE_1 + * - \ref TK_SENSE_PULSE_2 + * - \ref TK_SENSE_PULSE_4 + * - \ref TK_SENSE_PULSE_8 + * @return None + * \hideinitializer + */ +#define TK_SET_PULSE_WIDTH(u32PulseWidth) (TK->REFCTL = (TK->REFCTL & ~TK_REFCTL_SENPTCTL_Msk) | (u32PulseWidth)) + +/** + * @brief Set touch key Sensing count. + * @param[in] u32SenseCnt Sensing count. + * - \ref TK_SENSE_CNT_128 + * - \ref TK_SENSE_CNT_255 + * - \ref TK_SENSE_CNT_511 + * - \ref TK_SENSE_CNT_1023 + * @return None + * \hideinitializer + */ +#define TK_SET_SENSING_CNT(u32SenseCnt) (TK->REFCTL = (TK->REFCTL & ~TK_REFCTL_SENTCTL_Msk) | (u32SenseCnt)) + + +/** + * @brief Set touch key AVCCH voltage. + * @param[in] u32AVCCHSel voltage selection. + * - \ref TK_AVCCH_1_DIV_16 + * - \ref TK_AVCCH_1_DIV_8 + * - \ref TK_AVCCH_3_DIV_16 + * - \ref TK_AVCCH_1_DIV_4 + * - \ref TK_AVCCH_5_DIV_16 + * - \ref TK_AVCCH_3_DIV_8 + * - \ref TK_AVCCH_7_DIV_16 + * - \ref TK_AVCCH_1_DIV_2 + * @return None + * \hideinitializer + */ +#define TK_SET_AVCCH(u32AVCCHSel) (TK->CTL = (TK->CTL & ~TK_CTL_AVCCHSEL_Msk) | (u32AVCCHSel)) + +/** + * @brief Get touch key complement capacitor bank data. + * @param[in] u32TKNum Touch key number. The valid value is 0~16. + * @return Complement capacitor bank data + * \hideinitializer + */ +#define TK_GET_COMP_CAP_BANK_DATA(u32TKNum) (((*(__IO uint32_t *) (&(TK->CCBDAT0) + ((u32TKNum) >> 2))) >> ((u32TKNum) % 4 * 8) & TK_CCBDAT0_CCBDAT0_Msk)) + +/** + * @brief Get touch key sensing result data. + * @param[in] u32TKNum Touch key number. The valid value is 0~16. + * @return Sensing result data + * \hideinitializer + */ +#define TK_GET_SENSE_DATA(u32TKNum) (((*(__IO uint32_t *) (&(TK->DAT0) + ((u32TKNum) >> 2))) >> ((u32TKNum) % 4 * 8) & TK_DAT0_TKDAT0_Msk)) + +/** + * @brief Get touch key busy status. + * @param None + * @retval 0 Touch key is scan completed or stopped. + * @retval 1 Touch key is busy. + * \hideinitializer + */ +#define TK_IS_BUSY() ((TK->STATUS & TK_STATUS_BUSY_Msk) ? 1: 0) + +/** + * @brief Get touch key interrupt flag. + * @param[in] u32Mask Interrupt flag type selection. + * - \ref TK_INT_SCAN_COMPLETE + * - \ref TK_INT_SCAN_COMPLETE_TH_ALL + * - \ref TK_INT_SCAN_TH_ALL + * - \ref TK_INT_SCAN_TH_TK0 + * - \ref TK_INT_SCAN_TH_TK1 + * - \ref TK_INT_SCAN_TH_TK2 + * - \ref TK_INT_SCAN_TH_TK3 + * - \ref TK_INT_SCAN_TH_TK4 + * - \ref TK_INT_SCAN_TH_TK5 + * - \ref TK_INT_SCAN_TH_TK6 + * - \ref TK_INT_SCAN_TH_TK7 + * - \ref TK_INT_SCAN_TH_TK8 + * - \ref TK_INT_SCAN_TH_TK9 + * - \ref TK_INT_SCAN_TH_TK10 + * - \ref TK_INT_SCAN_TH_TK11 + * - \ref TK_INT_SCAN_TH_TK12 + * - \ref TK_INT_SCAN_TH_TK13 + * - \ref TK_INT_SCAN_TH_TK14 + * - \ref TK_INT_SCAN_TH_TK15 + * - \ref TK_INT_SCAN_TH_TK16 + * @retval 0 Touch key has no interrupt. + * @retval 1 Touch key is scan completed or threshold control event occurs. + * \hideinitializer + */ +#define TK_GET_INT_STATUS(u32Mask) ((TK->STATUS & (u32Mask)) ? 1: 0) + +/** + * @brief Clear touch key interrupt flag. + * @param[in] u32Mask Interrupt flag type selection. + * - \ref TK_INT_SCAN_COMPLETE + * - \ref TK_INT_SCAN_COMPLETE_TH_ALL + * - \ref TK_INT_SCAN_TH_ALL + * - \ref TK_INT_SCAN_TH_TK0 + * - \ref TK_INT_SCAN_TH_TK1 + * - \ref TK_INT_SCAN_TH_TK2 + * - \ref TK_INT_SCAN_TH_TK3 + * - \ref TK_INT_SCAN_TH_TK4 + * - \ref TK_INT_SCAN_TH_TK5 + * - \ref TK_INT_SCAN_TH_TK6 + * - \ref TK_INT_SCAN_TH_TK7 + * - \ref TK_INT_SCAN_TH_TK8 + * - \ref TK_INT_SCAN_TH_TK9 + * - \ref TK_INT_SCAN_TH_TK10 + * - \ref TK_INT_SCAN_TH_TK11 + * - \ref TK_INT_SCAN_TH_TK12 + * - \ref TK_INT_SCAN_TH_TK13 + * - \ref TK_INT_SCAN_TH_TK14 + * - \ref TK_INT_SCAN_TH_TK15 + * - \ref TK_INT_SCAN_TH_TK16 + * @return None + * \hideinitializer + */ +#define TK_CLR_INT_FLAG(u32Mask) (TK->STATUS = (u32Mask)) + + +/*---------------------------------------------------------------------------------------------------------*/ +/* Define TK functions prototype */ +/*---------------------------------------------------------------------------------------------------------*/ +void TK_Open(void); +void TK_Close(void); +void TK_SetScanMode(uint32_t u32Mode); +void TK_ConfigSensitivity(uint32_t u32PulseWidth, uint32_t u32SenseCnt, uint32_t u32AVCCHSel); +void TK_SetCapBankPol(uint32_t u32CapBankPolSel); +void TK_EnableTkPolarity(uint32_t u32Mask); +void TK_DisableTkPolarity(uint32_t u32Mask); +void TK_SetCompCapBankData(uint32_t u32TKNum, uint32_t u32CapData); +void TK_SetTkPol(uint32_t u32Mask, uint32_t u32PolSel); +void TK_SetRefKeyCapBankData(uint32_t u32CapData); +void TK_SetScanThreshold(uint32_t u32TKNum, uint32_t u32HighLevel, uint32_t u32LowLevel); +void TK_EnableInt(uint32_t u32Msk); +void TK_DisableInt(uint32_t u32Msk); + + +/*@}*/ /* end of group TK_EXPORTED_FUNCTIONS */ + +/*@}*/ /* end of group TK_Driver */ + +/*@}*/ /* end of group Standard_Driver */ + +#ifdef __cplusplus +} +#endif + +#endif //__TK_H__ + +/*** (C) COPYRIGHT 2014~2015 Nuvoton Technology Corp. ***/