Mouse code for the MacroRat
Diff: mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/sdk/drivers_nrf/gpiote/nrf_drv_gpiote.h
- Revision:
- 18:6a4db94011d3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-dev/targets/TARGET_NORDIC/TARGET_NRF5/sdk/drivers_nrf/gpiote/nrf_drv_gpiote.h Sun May 14 23:18:57 2017 +0000 @@ -0,0 +1,336 @@ +/* + * Copyright (c) 2015 Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA + * integrated circuit in a product or a software update for such product, must reproduce + * the above copyright notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be + * used to endorse or promote products derived from this software without specific prior + * written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary or object form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + +#ifndef NRF_DRV_GPIOTE__ +#define NRF_DRV_GPIOTE__ + +/** + * @addtogroup nrf_gpiote GPIOTE abstraction and driver + * @ingroup nrf_drivers + * @brief GPIOTE APIs. + * @defgroup nrf_drv_gpiote GPIOTE driver + * @{ + * @ingroup nrf_gpiote + * @brief GPIOTE driver for managing input and output pins. + */ + +#include "nrf_gpiote.h" +#include "nrf_gpio.h" +#include "nrf_drv_config.h" +#include "sdk_errors.h" +#include <stdint.h> +#include <stdbool.h> + +/**@brief Input pin configuration. */ +typedef struct +{ + nrf_gpiote_polarity_t sense; /**< Transition that triggers interrupt. */ + nrf_gpio_pin_pull_t pull; /**< Pulling mode. */ + bool is_watcher; /**< True when the input pin is tracking an output pin. */ + bool hi_accuracy;/**< True when high accuracy (IN_EVENT) is used. */ +} nrf_drv_gpiote_in_config_t; + +/**@brief Macro for configuring a pin to use a GPIO IN or PORT EVENT to detect low-to-high transition. + * @details Set hi_accu to true to use IN_EVENT. */ +#define GPIOTE_CONFIG_IN_SENSE_LOTOHI(hi_accu) \ + { \ + .is_watcher = false, \ + .hi_accuracy = hi_accu, \ + .pull = NRF_GPIO_PIN_NOPULL, \ + .sense = NRF_GPIOTE_POLARITY_LOTOHI, \ + } + +/**@brief Macro for configuring a pin to use a GPIO IN or PORT EVENT to detect high-to-low transition. + * @details Set hi_accu to true to use IN_EVENT. */ +#define GPIOTE_CONFIG_IN_SENSE_HITOLO(hi_accu) \ + { \ + .is_watcher = false, \ + .hi_accuracy = hi_accu, \ + .pull = NRF_GPIO_PIN_NOPULL, \ + .sense = NRF_GPIOTE_POLARITY_HITOLO, \ + } + +/**@brief Macro for configuring a pin to use a GPIO IN or PORT EVENT to detect any change on the pin. + * @details Set hi_accu to true to use IN_EVENT.*/ +#define GPIOTE_CONFIG_IN_SENSE_TOGGLE(hi_accu) \ + { \ + .is_watcher = false, \ + .hi_accuracy = hi_accu, \ + .pull = NRF_GPIO_PIN_NOPULL, \ + .sense = NRF_GPIOTE_POLARITY_TOGGLE, \ + } + +/**@brief Output pin configuration. */ +typedef struct +{ + nrf_gpiote_polarity_t action; /**< Configuration of the pin task. */ + nrf_gpiote_outinit_t init_state; /**< Initial state of the output pin. */ + bool task_pin; /**< True if the pin is controlled by a GPIOTE task. */ +} nrf_drv_gpiote_out_config_t; + +/**@brief Macro for configuring a pin to use as output. GPIOTE is not used for the pin. */ +#define GPIOTE_CONFIG_OUT_SIMPLE(init_high) \ + { \ + .init_state = init_high ? NRF_GPIOTE_INITIAL_VALUE_HIGH : NRF_GPIOTE_INITIAL_VALUE_LOW, \ + .task_pin = false, \ + } + +/**@brief Macro for configuring a pin to use the GPIO OUT TASK to change the state from high to low. + * @details The task will clear the pin. Therefore, the pin is set initially. */ +#define GPIOTE_CONFIG_OUT_TASK_LOW \ + { \ + .init_state = NRF_GPIOTE_INITIAL_VALUE_HIGH, \ + .task_pin = true, \ + .action = NRF_GPIOTE_POLARITY_HITOLO, \ + } + +/**@brief Macro for configuring a pin to use the GPIO OUT TASK to change the state from low to high. + * @details The task will set the pin. Therefore, the pin is cleared initially. */ +#define GPIOTE_CONFIG_OUT_TASK_HIGH \ + { \ + .init_state = NRF_GPIOTE_INITIAL_VALUE_LOW, \ + .task_pin = true, \ + .action = NRF_GPIOTE_POLARITY_LOTOHI, \ + } + +/**@brief Macro for configuring a pin to use the GPIO OUT TASK to toggle the pin state. + * @details The initial pin state must be provided. */ +#define GPIOTE_CONFIG_OUT_TASK_TOGGLE(init_high) \ + { \ + .init_state = init_high ? NRF_GPIOTE_INITIAL_VALUE_HIGH : NRF_GPIOTE_INITIAL_VALUE_LOW, \ + .task_pin = true, \ + .action = NRF_GPIOTE_POLARITY_TOGGLE, \ + } + +/** @brief Pin. */ +typedef uint32_t nrf_drv_gpiote_pin_t; + +/** + * @brief Pin event handler prototype. + * @param pin Pin that triggered this event. + * @param action Action that lead to triggering this event. + */ +typedef void (*nrf_drv_gpiote_evt_handler_t)(nrf_drv_gpiote_pin_t pin, nrf_gpiote_polarity_t action); + +/** + * @brief Function for initializing the GPIOTE module. + * + * @details Only static configuration is supported to prevent the shared + * resource being customized by the initiator. + * + * @retval NRF_SUCCESS If initialization was successful. + * @retval NRF_ERROR_INVALID_STATE If the driver was already initialized. + */ +ret_code_t nrf_drv_gpiote_init(void); + +/** + * @brief Function for checking if the GPIOTE module is initialized. + * + * @details The GPIOTE module is a shared module. Therefore, you should check if + * the module is already initialized and skip initialization if it is. + * + * @retval true If the module is already initialized. + * @retval false If the module is not initialized. + */ +bool nrf_drv_gpiote_is_init(void); + +/** + * @brief Function for uninitializing the GPIOTE module. + */ +void nrf_drv_gpiote_uninit(void); + +/** + * @brief Function for initializing a GPIOTE output pin. + * @details The output pin can be controlled by the CPU or by PPI. The initial + * configuration specifies which mode is used. If PPI mode is used, the driver + * attempts to allocate one of the available GPIOTE channels. If no channel is + * available, an error is returned. + * + * @param[in] pin Pin. + * @param[in] p_config Initial configuration. + * + * @retval NRF_SUCCESS If initialization was successful. + * @retval NRF_ERROR_INVALID_STATE If the driver is not initialized or the pin is already used. + * @retval NRF_ERROR_NO_MEM If no GPIOTE channel is available. + */ +ret_code_t nrf_drv_gpiote_out_init(nrf_drv_gpiote_pin_t pin, + nrf_drv_gpiote_out_config_t const * p_config); + +/** + * @brief Function for uninitializing a GPIOTE output pin. + * @details The driver frees the GPIOTE channel if the output pin was using one. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_uninit(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for setting a GPIOTE output pin. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_set(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for clearing a GPIOTE output pin. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_clear(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for toggling a GPIOTE output pin. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_toggle(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for enabling a GPIOTE output pin task. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_task_enable(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for disabling a GPIOTE output pin task. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_task_disable(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for getting the address of a configurable GPIOTE task. + * + * @param[in] pin Pin. + */ +uint32_t nrf_drv_gpiote_out_task_addr_get(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for initializing a GPIOTE input pin. + * @details The input pin can act in two ways: + * - lower accuracy but low power (high frequency clock not needed) + * - higher accuracy (high frequency clock required) + * + * The initial configuration specifies which mode is used. + * If high-accuracy mode is used, the driver attempts to allocate one + * of the available GPIOTE channels. If no channel is + * available, an error is returned. + * In low accuracy mode SENSE feature is used. In this case only one active pin + * can be detected at a time. It can be worked around by setting all of the used + * low accuracy pins to toggle mode. + * For more information about SENSE functionality, refer to Product Specification. + * + * @param[in] pin Pin. + * @param[in] p_config Initial configuration. + * @param[in] evt_handler User function to be called when the configured transition occurs. + * + * @retval NRF_SUCCESS If initialization was successful. + * @retval NRF_ERROR_INVALID_STATE If the driver is not initialized or the pin is already used. + * @retval NRF_ERROR_NO_MEM If no GPIOTE channel is available. + */ +ret_code_t nrf_drv_gpiote_in_init(nrf_drv_gpiote_pin_t pin, + nrf_drv_gpiote_in_config_t const * p_config, + nrf_drv_gpiote_evt_handler_t evt_handler); + +/** + * @brief Function for uninitializing a GPIOTE input pin. + * @details The driver frees the GPIOTE channel if the input pin was using one. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_in_uninit(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for enabling sensing of a GPIOTE input pin. + * + * @details If the input pin is configured as high-accuracy pin, the function + * enables an IN_EVENT. Otherwise, the function enables the GPIO sense mechanism. + * Note that a PORT event is shared between multiple pins, therefore the + * interrupt is always enabled. + * + * @param[in] pin Pin. + * @param[in] int_enable True to enable the interrupt. Always valid for a high-accuracy pin. + */ +void nrf_drv_gpiote_in_event_enable(nrf_drv_gpiote_pin_t pin, bool int_enable); + +/** + * @brief Function for disabling a GPIOTE input pin. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_in_event_disable(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for checking if a GPIOTE input pin is set. + * + * @param[in] pin Pin. + * @retval true If the input pin is set. + * @retval false If the input pin is not set. + */ +bool nrf_drv_gpiote_in_is_set(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for getting the address of a GPIOTE input pin event. + * @details If the pin is configured to use low-accuracy mode, the address of the PORT event is returned. + * + * @param[in] pin Pin. + */ +uint32_t nrf_drv_gpiote_in_event_addr_get(nrf_drv_gpiote_pin_t pin); + +/** + * @brief Function for forcing a specific state on the pin configured as task. + * + * @param[in] pin Pin. + * @param[in] state Pin state. + */ +void nrf_drv_gpiote_out_task_force(nrf_drv_gpiote_pin_t pin, uint8_t state); + +/** + * @brief Function for triggering the task manually. + * + * @param[in] pin Pin. + */ +void nrf_drv_gpiote_out_task_trigger(nrf_drv_gpiote_pin_t pin); + +/** + *@} + **/ + +#endif //NRF_DRV_GPIOTE__